Differences

This shows you the differences between two versions of the page.

--- aix:power10_hmc [2024/02/09 21:33]
manu created
+++ aix:power10_hmc [2024/02/09 22:13] (current)
manu
@@ Line 1: / Line 1: @@
 ====== Initialize Power 10 with eBMC ======
+https://community.ibm.com/community/user/power/blogs/hariganesh-muralidharan1/2022/07/27/whats-new-in-hmc-10110200
+https://www.ibm.com/support/pages/ibm-power-systems-power10-servers
+https://www.ibm.com/support/pages/connecting-power-10-ebmc-system-hmc
+Before Power 10, only one IP address was requested on power servers ASMI to manage it.
+FIXME Now you have first the eBMC, but before starting a power 10, also add a VMI IP address.
+  default login/password for eBMC: admin / admin
+FIXME **There are no default IP addresses anymore**, to access ASM (eBMC) using a browser. You should use **panel function 30** to what the IP address may be set to. Panel is located in front of the server, you have buttons: up, down and select
+{{aix:p10_ebmc01.png?650|}}
+{{aix:p10_ebmc02.png?650|}}
+If you use DHCP on the HMC, the eBMC of Power 10 'll appear into HMC interface. Do not start the Power, first you have to set a password, it's both HMC access and admin password for the eBMC.
+Before power on the server choose **action**, and **VMI configuration** (IP address), if IP is static, then configure one, else change to DHCP.
+  Select the same eBMC network interface the HMC is cabled to.
+  Note that the adapters may list eth1 first, however eth0 is typically used for the first HMC. If 2 HMC are used, both have to be setup
+//Note// the eBMC port used on the Power 10 system (first (T0) HMC port = eth0, second (T1)HMC port = eth1)
+If this step is missed, when server is started, you 'll have a connection lost on the HMC !
+Now you're able to power on.
+You can either see the power progress on
+  * the HMC
+  * on eBMC web interface connecting as admin, you have **host console**
+  * using ssh admin@<eBMC> -p 2200
+FIXME The VMI interfaces share the physical connection of the eBMC ports but have their own IP (DHCP or static)

wiki

User Tools

Site Tools

Differences

Page Tools