hardware:lenovo_d1212
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
hardware:lenovo_d1212 [2022/09/12 17:15] manu created |
hardware:lenovo_d1212 [2022/09/12 17:20] (current) manu [GEM CLI via Telnet] |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| DHCP is enabled by default when your system meets the following requirements: | DHCP is enabled by default when your system meets the following requirements: | ||
| - | ^System^ EC number on the label of ESM Firmware version | + | ^System^ EC number on the label of ESM ^Firmware version^ |
| |D1212/D1224| N34768 |5.0.0.15| | |D1212/D1224| N34768 |5.0.0.15| | ||
| |D3284| N34764 |5.0.0.17| | |D3284| N34764 |5.0.0.17| | ||
| //Notes:// | //Notes:// | ||
| - | * Do not connect the Ethernet port to the public network. It is recommended that all the ESM Ethernet ports | + | * Do not connect the Ethernet port to the public network. It is recommended that all the ESM Ethernet ports are in the local area network. |
| - | are in the local area network. | + | * If the EC number on the label of ESM is 019609 or later, the firmware installed on the ESM has newer version and the static IP addresses on each Ethernet port are as follows: |
| - | * If the EC number on the label of ESM is 019609 or later, the firmware installed on the ESM has newer | + | |
| - | version and the static IP addresses on each Ethernet port are as follows: | + | |
| * ESM 0: 192.168.0.101 | * ESM 0: 192.168.0.101 | ||
| * ESM 1: 192.168.0.102 | * ESM 1: 192.168.0.102 | ||
| - | * When the Storage D3284 is used as the expansion enclosure of Storage DS-series, the Ethernet | + | * When the Storage D3284 is used as the expansion enclosure of Storage DS-series, the Ethernet connector on each ESM is disabled |
| - | connector on each ESM is disabled | + | |
| + | ==== GEM CLI via Telnet ==== | ||
| + | |||
| + | GEM CLI can be accessed via Telnet by connecting to the Ethernet port of a controller and using the | ||
| + | command | ||
| + | Telnet <ESM IP> | ||
| + | |||
| + | The default account and password are: | ||
| + | * User name: cliuser | ||
| + | * Password: L@12sT12 (case sensitive) | ||
| + | Note: After replacing the chassis, the password will be restored to the default value. Reset the password as | ||
| + | needed. | ||
| + | |||
| + | Example of help command: | ||
| + | help [all] | [<cmd>] | ||
hardware/lenovo_d1212.1662995736.txt.gz · Last modified: 2022/09/12 17:15 by manu
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
