storage:svc_scripts
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
storage:svc_scripts [2024/11/13 00:13] manu |
storage:svc_scripts [2025/02/28 14:36] (current) manu |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| ===== Monitoring SVC nagios ===== | ===== Monitoring SVC nagios ===== | ||
| + | |||
| + | ==== Check paths ==== | ||
| + | |||
| + | <cli prompt='#'> | ||
| + | [root@aix001]/usr/local/nagios/libexec# cat check_paths.sh | ||
| + | </cli> | ||
| + | <code> | ||
| + | #!/bin/sh | ||
| + | #@(#) v1.0 Count number of paths per disk | ||
| + | # v1.1 add sudo linux | ||
| + | # v1.2 change for VSCSI | ||
| + | # v1.3 add verbose (-v), improvements linux | ||
| + | |||
| + | # number of path per type of disk | ||
| + | pathviosfc=4 | ||
| + | pathviosscsi=2 | ||
| + | pathviossas=1 | ||
| + | pathlparfc=8 | ||
| + | pathlparscsi=2 | ||
| + | pathlparsas=1 | ||
| + | |||
| + | |||
| + | STATUS=0 | ||
| + | |||
| + | STATE_OK=0 | ||
| + | STATE_WARNING=1 | ||
| + | STATE_CRITICAL=2 | ||
| + | STATE_UNKNOWN=3 | ||
| + | |||
| + | MSG="" | ||
| + | verbose="" | ||
| + | |||
| + | # specified value for nb paths | ||
| + | if [ "$npath" == "" ] | ||
| + | then | ||
| + | nbpath=$pathlparfc | ||
| + | fi | ||
| + | |||
| + | os=$(uname -a | awk '{print $1}') | ||
| + | |||
| + | grepp() { [ $# -eq 1 ] && perl -00ne "print if /$1/i" || perl -00ne "print if /$1/i" < "$2";} | ||
| + | |||
| + | #--------------------- | ||
| + | count_linux_path() | ||
| + | { | ||
| + | tempfile=/tmp/multipath.txt | ||
| + | |||
| + | if [ ! -x /usr/sbin/multipath ] || [ $(lsscsi -s | grep -q VMware; echo $?) -eq 0 ] | ||
| + | then | ||
| + | MSG="OK: no multipathing" | ||
| + | verbose="$MSG" | ||
| + | STATUS=$STATE_OK | ||
| + | else | ||
| + | if [ $(timeout 30 sudo /usr/sbin/multipath -ll | grep -v "policy=" | grep -v "size=" | tr -s ' ' | sed 's/\ /;/g' | sed '/^mpath/i \\n' > $tempfile ; echo $?) -ne "0" ] | ||
| + | then | ||
| + | MSG="$MSG Maybe error on sudo config" | ||
| + | verbose="$MSG" | ||
| + | STATUS=$STATE_UNKNOWN | ||
| + | else | ||
| + | for i in $(cat $tempfile | grep '^mpath' | awk -F';' '{print $1}') | ||
| + | do | ||
| + | pathok=$(cat $tempfile | grepp "^$i;" | grep -v "policy=" | grep -v "size=" | grep -v '^mpath' | grep active | wc -l | awk '{print $1}') | ||
| + | pathok_pct=$(echo "scale=1;100*$pathok/$nbpath" | bc | cut -d '.' -f1) | ||
| + | verbose="$verbose $i;$pathok/$nbpath" # verbose message | ||
| + | if [ "$pathok_pct" -lt "50" ] | ||
| + | then | ||
| + | MSG="$MSG $i;$pathok/$nbpath" | ||
| + | if [ $STATUS -lt $STATE_CRITICAL ] | ||
| + | then | ||
| + | STATUS=$STATE_CRITICAL | ||
| + | fi | ||
| + | else | ||
| + | if [ "$pathok_pct" -ne "100" ] | ||
| + | then | ||
| + | MSG="$MSG $i;$pathok/$nbpath" | ||
| + | if [ $STATUS -lt $STATE_CRITICAL ] | ||
| + | then | ||
| + | STATUS=$STATE_WARNING | ||
| + | fi | ||
| + | fi | ||
| + | fi | ||
| + | done | ||
| + | fi | ||
| + | fi | ||
| + | |||
| + | rm -f $tempfile 2>/dev/null | ||
| + | } | ||
| + | |||
| + | #--------------------- | ||
| + | count_aix_path() | ||
| + | { | ||
| + | # check not available disks | ||
| + | nbdisknok=$(lsdev -Cc disk | grep -v Available | wc -l | awk '{print $1}') | ||
| + | if [ "$nbdisknok" -ne "0" ] | ||
| + | then | ||
| + | MSG="$MSG WARNING: $nbdisknok disks defined" | ||
| + | verbose="$MSG" | ||
| + | STATUS=$STATE_WARNING | ||
| + | else | ||
| + | STATUS=$STATE_OK | ||
| + | fi | ||
| + | |||
| + | for line in $(lsdev -Cc disk | tr -s ' ' | sed 's/\ /:/' | sed 's/\ /:/' | sed 's/\ /,/g') | ||
| + | do | ||
| + | hdisk=$(echo $line | awk -F':' '{print $1}') | ||
| + | if [ "$(echo $line | cut -d':' -f3- | tr 'A-Z' 'a-z' | grep -q mpio; echo $?)" -eq "0" ] | ||
| + | then | ||
| + | if [ ! -e /usr/ios/cli/ioscli ] | ||
| + | then | ||
| + | # type LPAR FC | ||
| + | nbpath=$pathlparfc | ||
| + | else | ||
| + | # type VIOS FC | ||
| + | nbpath=$pathviosfc | ||
| + | fi | ||
| + | else | ||
| + | if [ "$(echo $line | cut -d':' -f3- | tr 'A-Z' 'a-z' | grep -q scsi; echo $?)" -eq "0" ] | ||
| + | then | ||
| + | if [ ! -e /usr/ios/cli/ioscli ] | ||
| + | then | ||
| + | # type LPAR SCSI | ||
| + | nbpath=$pathlparscsi | ||
| + | else | ||
| + | # type VIOS SCSI | ||
| + | nbpath=$pathviosscsi | ||
| + | fi | ||
| + | else | ||
| + | if [ "$(echo $line | cut -d':' -f3- | tr 'A-Z' 'a-z' | grep -q sas; echo $?)" -eq "0" ] | ||
| + | then | ||
| + | if [ ! -e /usr/ios/cli/ioscli ] | ||
| + | then | ||
| + | # type LPAR SAS | ||
| + | nbpath=$pathlparsas | ||
| + | else | ||
| + | # type VIOS SAS | ||
| + | nbpath=$pathviossas | ||
| + | fi | ||
| + | fi | ||
| + | fi | ||
| + | fi | ||
| + | |||
| + | pathok=$(lspath -l $hdisk | grep Enabled | wc -l | awk '{print $1}') | ||
| + | pathok_pct=$(echo "scale=1;100*$pathok/$nbpath" | bc | cut -d '.' -f1) | ||
| + | verbose="$verbose $hdisk;$pathok/$nbpath" | ||
| + | if [ "$pathok_pct" -lt "50" ] | ||
| + | then | ||
| + | MSG="$MSG $hdisk;$pathok/$nbpath" | ||
| + | if [ $STATUS -lt $STATE_CRITICAL ] | ||
| + | then | ||
| + | STATUS=$STATE_CRITICAL | ||
| + | fi | ||
| + | else | ||
| + | if [ "$pathok_pct" -ne "100" ] | ||
| + | then | ||
| + | MSG="$MSG $hdisk;$pathok/$nbpath" | ||
| + | if [ $STATUS -lt $STATE_CRITICAL ] | ||
| + | then | ||
| + | STATUS=$STATE_WARNING | ||
| + | fi | ||
| + | fi | ||
| + | fi | ||
| + | done | ||
| + | } | ||
| + | |||
| + | ###################### | ||
| + | if [ "$os" = "Linux" ] | ||
| + | then | ||
| + | count_linux_path | ||
| + | else | ||
| + | if [ "$os" = "AIX" ] | ||
| + | then | ||
| + | count_aix_path | ||
| + | else | ||
| + | echo "########## Unknown OS" | ||
| + | STATUS=$STATE_UNKNOWN | ||
| + | fi | ||
| + | fi | ||
| + | |||
| + | if [ $STATUS -eq $STATE_OK ] | ||
| + | then | ||
| + | echo "OK" | ||
| + | else | ||
| + | echo "$MSG" | ||
| + | fi | ||
| + | |||
| + | # For debug | ||
| + | if [ "$1" = "-v" ] | ||
| + | then | ||
| + | echo "$verbose" | tr ' ' '\n' | ||
| + | fi | ||
| + | |||
| + | exit $STATUS | ||
| + | </code> | ||
| ==== Check quorum ==== | ==== Check quorum ==== | ||
| + | <cli prompt='#'> | ||
| + | [root@nagios plugins]# cat check_ibm_storwize_quorum.sh | ||
| + | </cli> | ||
| + | <code> | ||
| + | #!/bin/sh | ||
| + | #set -x | ||
| + | ################################################## | ||
| + | #@(#) check SVC IP quorum | ||
| + | ################################################## | ||
| + | # version: 1.0 02-2022 Manu | ||
| + | ################################################## | ||
| + | |||
| + | STATUS=0 | ||
| + | |||
| + | STATE_OK=0 | ||
| + | STATE_WARNING=1 | ||
| + | STATE_CRITICAL=2 | ||
| + | STATE_UNKNOWN=3 | ||
| + | |||
| + | cluster=$(echo $1 | sed 's/\-cluster=//') | ||
| + | user="nagios" | ||
| + | |||
| + | quorumsrv="witness01.ad.com" | ||
| + | |||
| + | output=$(ssh $user@$cluster 'lsquorum -delim :') | ||
| + | |||
| + | STATUS=0 | ||
| + | MSG="" | ||
| + | if [[ $(echo $output | tr ' ' '\n' | grep ':online:' | grep ':device:' | grep ":${quorumsrv}" | wc -l | awk '{print $1}') -ge "1" ]] | ||
| + | then | ||
| + | (( STATUS = STATUS + 0 )) | ||
| + | MSG="IP quorum: $quorumsrv OK" | ||
| + | else | ||
| + | (( STATUS = STATUS + 1 )) | ||
| + | MSG="IP quorum: $quorumsrv down!!!" | ||
| + | fi | ||
| + | |||
| + | if [[ $(echo $output | tr ' ' '\n' | grep ':online:' | grep -v ':device:' | wc -l | awk '{print $1}') -ge "2" ]] | ||
| + | then | ||
| + | (( STATUS = STATUS + 0 )) | ||
| + | MSG=$(echo "$MSG | nb quorum OK") | ||
| + | else | ||
| + | (( STATUS = STATUS + 1 )) | ||
| + | MSG=$(echo "$MSG | bad number of quorum !!") | ||
| + | fi | ||
| + | |||
| + | echo $MSG | ||
| + | exit $STATUS | ||
| + | </code> | ||
| ==== Check paths ==== | ==== Check paths ==== | ||
| + | <cli prompt='#'> | ||
| + | [root@lnxb080 plugins]# cat check_storage_host_paths.sh | ||
| + | </cli> | ||
| + | <code> | ||
| + | #!/bin/sh | ||
| + | #set -x | ||
| + | ################################################## | ||
| + | #@(#) check host paths on SVC | ||
| + | ################################################## | ||
| + | # version: 1.0 02-2022 Manu | ||
| + | ################################################## | ||
| + | |||
| + | STATUS=0 | ||
| + | |||
| + | STATE_OK=0 | ||
| + | STATE_WARNING=1 | ||
| + | STATE_CRITICAL=2 | ||
| + | STATE_UNKNOWN=3 | ||
| + | |||
| + | cluster=$(echo $1 | sed 's/\-cluster=//') | ||
| + | user="nagios" | ||
| + | SSH="ssh -o ConnectTimeout=30 ${user}@" | ||
| + | list="svc01" | ||
| + | |||
| + | MSG="" | ||
| + | exclude=':none:' | ||
| + | |||
| + | word="$1" | ||
| + | case "$word" in | ||
| + | "esx" ) count=2 | ||
| + | exclude=':none:' ;; | ||
| + | "aix" ) count=4 | ||
| + | exclude="aixv" ;; | ||
| + | "lnx" ) count=4 | ||
| + | exclude=':none:' ;; | ||
| + | "vio" ) count=2 | ||
| + | word=aixv | ||
| + | exclude=':none:' ;; | ||
| + | "win" ) count=2 | ||
| + | word='win|mssql' | ||
| + | exclude=':none:' ;; | ||
| + | "other" ) count=4 | ||
| + | word='svc01' | ||
| + | exclude='esx|aix|lnx|win|mssql' ;; | ||
| + | "*" ) MSG="wrong parameter" ;; | ||
| + | esac | ||
| + | |||
| + | |||
| + | |||
| + | for storage in $(echo ${list}) | ||
| + | do | ||
| + | cmd='lshost -delim : -nohdr' | ||
| + | for node in $(${SSH}${storage} $cmd | cut -d':' -f2) | ||
| + | do | ||
| + | cmd="lshost -delim : $node" | ||
| + | MSG1=$(echo "$storage:$node:$(${SSH}${storage} $cmd | grep -c "state:active")" | grep -v ':0$' | egrep -i "${word}" | grep -v ":${count}$" | egrep -vi "${exclude}") | ||
| + | if [ "$MSG1" != "" ] | ||
| + | then | ||
| + | MSG=$(echo "${MSG};${MSG1}") | ||
| + | fi | ||
| + | done | ||
| + | done | ||
| + | |||
| + | if [ "$MSG" == "" ] | ||
| + | then | ||
| + | RC=0 | ||
| + | else | ||
| + | RC=2 | ||
| + | echo $MSG | ||
| + | fi | ||
| + | |||
| + | exit $RC | ||
| + | </code> | ||
| ==== Check v7000/SVC ==== | ==== Check v7000/SVC ==== | ||
| + | |||
| + | https://exchange.nagios.org/directory/Plugins/Hardware/Storage-Systems/SAN-and-NAS/IBM-San-Volume-Controller/IBM-StorWize-V3700--2F-V7000-check/details | ||
| + | |||
| + | <cli prompt='#'> | ||
| + | [root@centreon01 plugins]# cat check_ibm_v7000.sh | ||
| + | </cli> | ||
| + | <code> | ||
| + | #!/usr/bin/bash | ||
| + | #set -x | ||
| + | ############################################# | ||
| + | #@(#) Nagios-Centreon check for IBM storage | ||
| + | ############################################# | ||
| + | # version 1.0 01-2025 | ||
| + | |||
| + | ssh='/usr/bin/ssh -q' | ||
| + | exitCode=1 | ||
| + | |||
| + | while getopts 'M:U:Q:d:h' OPT; do | ||
| + | case $OPT in | ||
| + | M) storage=$OPTARG ;; | ||
| + | U) user=$OPTARG ;; | ||
| + | Q) query=$OPTARG ;; | ||
| + | h) help="yes" ;; | ||
| + | *) unknown="yes" ;; | ||
| + | esac | ||
| + | done | ||
| + | |||
| + | #storage="psnsvccl01" | ||
| + | #user=centreon | ||
| + | outputMess="" | ||
| + | |||
| + | # usage | ||
| + | HELP=" | ||
| + | Check IBM Storwize v7000 throght ssh (GPL licence) | ||
| + | |||
| + | usage: $0 [ -M value -U value -Q command -h ] | ||
| + | |||
| + | syntax: | ||
| + | |||
| + | -M --> IP Address | ||
| + | -U --> user | ||
| + | -Q --> query to storage | ||
| + | lsdrive | ||
| + | lsarray | ||
| + | lsmdisk | ||
| + | lsmdiskgrp | ||
| + | lsvdisk | ||
| + | lsenclosure | ||
| + | lsenclosurecanister | ||
| + | lsenclosurepsu | ||
| + | lsenclosurebattery | ||
| + | lsnode --> SVC only | ||
| + | lsnodebattery --> SVC only | ||
| + | -h --> Print This Help Screen | ||
| + | |||
| + | Note : | ||
| + | This check use ssh protocoll. | ||
| + | " | ||
| + | |||
| + | if [ "$hlp" = "yes" -o $# -lt 1 ]; then | ||
| + | echo "$HELP" | ||
| + | exit 0 | ||
| + | fi | ||
| + | |||
| + | case $query in | ||
| + | lsdrive) | ||
| + | word_online=':online:' | ||
| + | num=1 | ||
| + | device='Drives' | ||
| + | ;; | ||
| + | lsarray) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Array' | ||
| + | ;; | ||
| + | lsmdisk) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Mdisks' | ||
| + | ;; | ||
| + | lsmdiskgrp) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Pools' | ||
| + | ;; | ||
| + | lsvdisk) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Volumes' | ||
| + | ;; | ||
| + | lsenclosure) | ||
| + | word_online=':online:' | ||
| + | num=1 | ||
| + | device='Enclosures' | ||
| + | ;; | ||
| + | lsenclosurecanister) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Nodes' | ||
| + | ;; | ||
| + | lsenclosurepsu) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='PowerSupply' | ||
| + | ;; | ||
| + | lsenclosurebattery) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Battery' | ||
| + | ;; | ||
| + | lsnode) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Nodes' | ||
| + | ;; | ||
| + | lsnodebattery) | ||
| + | word_online=':online:' | ||
| + | num=2 | ||
| + | device='Battery' | ||
| + | ;; | ||
| + | *) | ||
| + | echo -ne "Command not found. \n" | ||
| + | exitCode=3 | ||
| + | exit $exitCode | ||
| + | ;; | ||
| + | esac | ||
| + | |||
| + | output=$($ssh $user@$storage $query -delim : 2>/dev/null) | ||
| + | |||
| + | if [ "$output" == "" ] | ||
| + | then | ||
| + | outputMess="$outputMess UNKNOWN: Improper command" | ||
| + | exitCode=3 | ||
| + | else | ||
| + | nbline=$(echo $output | tr ' ' '\n' | sed '1d' | grep -cv "${word_online}") | ||
| + | if [ "$nbline" -ne "0" ] | ||
| + | then | ||
| + | value=$(echo $output | tr ' ' '\n' | sed '1d' | grep -v "${word_online}" | cut -d':' -f$num | tr '\n' ';' | sed 's/;$//') | ||
| + | outputMess="$outputMess CRITICAL: $device OFFLINE $value \n" | ||
| + | exitCode=2 | ||
| + | else | ||
| + | value=$(echo $output | tr ' ' '\n' | sed '1d' | grep "${word_online}" | cut -d':' -f$num | tr '\n' ';' | sed 's/;$//') | ||
| + | outputMess="$outputMess OK: $device $value \n" | ||
| + | exitCode=0 | ||
| + | fi | ||
| + | fi | ||
| + | |||
| + | echo -ne "$outputMess\n" | ||
| + | exit $exitCode | ||
| + | </code> | ||
| Line 312: | Line 777: | ||
| </code> | </code> | ||
| + | ==== template ==== | ||
| + | |||
| + | **check_ibm_v7000.sh** | ||
| + | <code> | ||
| + | #!/bin/bash | ||
| + | # Author: Lazzarin Alberto | ||
| + | # Date: 10-04-2013 | ||
| + | # Version 1.4 | ||
| + | # | ||
| + | # This plugin check the HW status of IBM Storwize v7000. | ||
| + | # To use this script you need to create a linux user with his ssh certificate. | ||
| + | # Create the same user on the v7000, member of monitor group and upload the public ssh key. | ||
| + | # Try to log from linux machine to the v7000 without password, if it function you can use the plugin. | ||
| + | # I use the 'nagios' user to check the remote system. | ||
| + | # The help is included into the script. | ||
| + | # | ||
| + | # | ||
| + | # | ||
| + | # CHANGELOG | ||
| + | # | ||
| + | # 1.4 Made by Andrea Tedesco [andrea85 . tedesco @ gmail . com] | ||
| + | # Add check of v7000 Unified | ||
| + | # 1.3 Made by Ivan Bergantin [ivan . bergantin @ gmail . com] suggested by Leandro Freitas [leandro @ nodeps . com . br] | ||
| + | # Add short output in "Service Status Details For Host" view, and detailed output in "Service Information"view | ||
| + | # | ||
| + | # 1.2 Made by Feilong | ||
| + | # Add check of mirror status between two volumes on two IBM V7000. | ||
| + | # It check the number of mirrors, the numbers of consitent and synchronized mirrors. If they are differents, the status returned is critical. | ||
| + | # | ||
| + | # 1.1 | ||
| + | # Change login method from from 'plink' to ssh. | ||
| + | # Add "OK" and "ATTENTION" in the output. | ||
| + | # | ||
| + | # 1.0 | ||
| + | # First release. | ||
| + | # | ||
| + | |||
| + | ssh=/usr/bin/ssh | ||
| + | exitCode=0 | ||
| + | |||
| + | while getopts 'M:U:Q:d:h' OPT; do | ||
| + | case $OPT in | ||
| + | M) storage=$OPTARG;; | ||
| + | U) user=$OPTARG;; | ||
| + | Q) query=$OPTARG;; | ||
| + | h) hlp="yes";; | ||
| + | *) unknown="yes";; | ||
| + | esac | ||
| + | done | ||
| + | |||
| + | # usage | ||
| + | HELP=" | ||
| + | Check IBM Storwize v7000 throght ssh (GPL licence) | ||
| + | |||
| + | usage: $0 [ -M value -U value -Q command -h ] | ||
| + | |||
| + | syntax: | ||
| + | |||
| + | -M --> IP Address | ||
| + | -U --> user | ||
| + | -Q --> query to storage | ||
| + | lsarray | ||
| + | lsdrive | ||
| + | lsvdisk | ||
| + | lsenclosure | ||
| + | lsenclosurebattery | ||
| + | lsenclosurecanister | ||
| + | lsenclosurepsu | ||
| + | lsenclosureslot | ||
| + | lsrcrelationship | ||
| + | unified | ||
| + | -h --> Print This Help Screen | ||
| + | |||
| + | Note : | ||
| + | This check use ssh protocoll. | ||
| + | " | ||
| + | |||
| + | if [ "$hlp" = "yes" -o $# -lt 1 ]; then | ||
| + | echo "$HELP" | ||
| + | exit 0 | ||
| + | fi | ||
| + | |||
| + | tmp_file=/tmp/v7000_$storage_$query.tmp | ||
| + | tmp_file_OK=/tmp/v7000_OK.tmp | ||
| + | outputMess="" | ||
| + | |||
| + | #echo -ne "IBM Storwize v7000 Health Check\n" | ||
| + | |||
| + | case $query in | ||
| + | lsarray) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $3}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: MDisk OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: MDisks \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | mdisk_name=$(echo "${line}" | awk '{printf $2}') | ||
| + | mdisk_status=$(echo "${line}" | awk '{printf $3}') | ||
| + | |||
| + | if [ $mdisk_status = "online" ]; then | ||
| + | outputMess="$outputMess OK: MDisks $mdisk_name status: $mdisk_status \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: MDisks $mdisk_name status: $mdisk_status \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsdrive) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $2}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: Disk OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: Drive \n" | ||
| + | fi | ||
| + | |||
| + | drive_total=$(/bin/cat $tmp_file |/usr/bin/wc -l) | ||
| + | while read line | ||
| + | do | ||
| + | drive_n=$(echo "${line}" | awk '{printf $1}') | ||
| + | drive_status=$(echo "${line}" | awk '{printf $2}') | ||
| + | drive_role=$(echo "${line}" | awk '{printf $4}') | ||
| + | drive_type=$(echo "${line}" | awk '{printf $5}') | ||
| + | drive_capacity=$(echo "${line}" | awk '{printf $6}') | ||
| + | drive_enclosure=$(echo "${line}" | awk '{printf $10}') | ||
| + | drive_slot=$(echo "${line}" | awk '{printf $11}') | ||
| + | |||
| + | if [ $drive_status = "online" ]; then | ||
| + | outputMess="$outputMess OK: Drive $drive_n is online \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: Disk $drive_n \nstatus: $disk_status \nrole: $drive_role \ntype: $drive_type \ncapacity: $drive_capacity \nenclosure: $drive_enclosure \nslot: $drive_slot " | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | |||
| + | ;; | ||
| + | |||
| + | lsvdisk) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $5}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: VDisk OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: VDisk \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | vdisk_name=$(echo "${line}" | awk '{printf $2}') | ||
| + | vdisk_status=$(echo "${line}" | awk '{printf $5}') | ||
| + | |||
| + | if [ $vdisk_status = "online" ]; then | ||
| + | outputMess="$outputMess OK: VDisks $vdisk_name status: $vdisk_status \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: VDisks $mdisk_name status: $vdisk_status \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsenclosure) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $2}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: Enclosure OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: Enclosure \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | enc_n=$(echo "${line}" | awk '{printf $1}') | ||
| + | enc_status=$(echo "${line}" | awk '{printf $2}') | ||
| + | enc_pn=$(echo "${line}" | awk '{printf $7}') | ||
| + | enc_sn=$(echo "${line}" | awk '{printf $8}') | ||
| + | |||
| + | |||
| + | if [ $enc_status = "online" ]; then | ||
| + | outputMess="$outputMess OK: Enclosure $enc_n status: $enc_status \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: Enclosure $enc_n status: $enc_status sn: $enc_sn pn: $enc_pn \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsenclosurebattery) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $3}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: Battery OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: Battery \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | batt_n=$(echo "${line}" | awk '{printf $2}') | ||
| + | batt_status=$(echo "${line}" | awk '{printf $3}') | ||
| + | batt_charge=$(echo "${line}" | awk '{printf $4}') | ||
| + | batt_rec=$(echo "${line}" | awk '{printf $5}') | ||
| + | batt_charge=$(echo "${line}" | awk '{printf $6}') | ||
| + | batt_eol=$(echo "${line}" | awk '{printf $7}') | ||
| + | |||
| + | |||
| + | if [ $batt_status = "online" -a $batt_rec = "no" -a $batt_charge = "100" -a $batt_eol = "no" ]; then | ||
| + | outputMess="$outputMess OK: Battery $batt_n status: $batt_status \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: Battery $batt_n status: $batt_statusn recharge: $batt_rec charged: $batt_charge eol: $batt_eol \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsenclosurecanister) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $3}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: Canister OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: Canister \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | can_id=$(echo "${line}" | awk '{printf $2}') | ||
| + | can_enc_id=$(echo "${line}" | awk '{printf $1}') | ||
| + | can_stat=$(echo "${line}" | awk '{printf $3}') | ||
| + | can_type=$(echo "${line}" | awk '{printf $4}') | ||
| + | |||
| + | if [ $can_stat = "online" ]; then | ||
| + | outputMess="$outputMess OK: Canister $can_id enclosure: $can_enc_id status: $can_stat \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: Canister $can_id enclosure: $can_enc_id status: $can_stat type: $can_type \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsenclosurepsu) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $3}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: PSU OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: PSU \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | psu_id=$(echo "${line}" | awk '{printf $2}') | ||
| + | psu_enc_id=$(echo "${line}" | awk '{printf $1}') | ||
| + | psu_stat=$(echo "${line}" | awk '{printf $3}') | ||
| + | |||
| + | if [ $psu_stat = "online" ]; then | ||
| + | outputMess="$outputMess OK: PSU $psu_id enclosure: $psu_enc_id status: $psu_stat \n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: PSU $psu_id enclosure: $psu_enc_id status: $psu_stat \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsenclosureslot) | ||
| + | $ssh $user@$storage $query |sed '1d' > $tmp_file | ||
| + | |||
| + | cat $tmp_file |awk '{printf $3, $4}' |grep -i offline | ||
| + | if [ "$?" -eq "0" ]; then | ||
| + | outputMess="$outputMess CRITICAL: EnclosureSlot OFFLINE \n" | ||
| + | else | ||
| + | outputMess="$outputMess OK: EnclosureSlot \n" | ||
| + | fi | ||
| + | |||
| + | while read line | ||
| + | do | ||
| + | slt_enc_id=$(echo "${line}" | awk '{printf $1}') | ||
| + | slt_id=$(echo "${line}" | awk '{printf $2}') | ||
| + | slt_prt1_stat=$(echo "${line}" | awk '{printf $3}') | ||
| + | slt_prt2_stat=$(echo "${line}" | awk '{printf $4}') | ||
| + | slt_drv=$(echo "${line}" | awk '{printf $5}') | ||
| + | drv_id=$(echo "${line}" | awk '{printf $6}') | ||
| + | |||
| + | if [ $slt_prt1_stat = "online" -a $slt_prt2_stat = "online" -a $slt_drv = "yes" ]; then | ||
| + | outputMess="$outputMess OK: Drive-$drv_id enclosure-$slt_enc_id slot-$slt_id port1-$slt_prt1_stat port2-$slt_prt2_stat\n" | ||
| + | else | ||
| + | outputMess="$outputMess ATTENTION: Drive-$drv_id enclosure-$slt_enc_id slot-$slt_id port1-$slt_prt1_stat port2-$slt_prt2_stat \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | done < $tmp_file | ||
| + | ;; | ||
| + | |||
| + | lsrcrelationship) | ||
| + | volume_mirror_prod=$($ssh $user@$storage $query | grep -c "rcrel*") | ||
| + | volume_mirror_sync=$($ssh $user@$storage $query | grep -c "consistent_synchronized") | ||
| + | |||
| + | if [ $volume_mirror_prod = $volume_mirror_sync ]; then | ||
| + | outputMess="$outputMess OK: $volume_mirror_prod mirors are consistent and synchronized \n" | ||
| + | else | ||
| + | outputMess="$outputMess CRITICAL: sur les $volume_mirror_prod volumes, only $volume_mirror_sync are consistent and synchronized \n" | ||
| + | exitCode=2 | ||
| + | fi | ||
| + | |||
| + | ;; | ||
| + | |||
| + | unified) | ||
| + | # Execute remote command | ||
| + | $ssh $user@$storage lshealth -Y > $tmp_file | ||
| + | |||
| + | # Parse remote command output | ||
| + | while read line | ||
| + | do | ||
| + | case $(echo "$line" | cut -d : -f 9) in | ||
| + | OK) # Sensor OK state -> do nothing | ||
| + | outputMess="${outputMess}`echo $line | cut -d : -f 7,9 >> $tmp_file_OK`" | ||
| + | ;; | ||
| + | WARNING) # Sensor WARNING state | ||
| + | if [ "$exitCode" -lt 1 ]; then | ||
| + | exitCode=1; | ||
| + | fi | ||
| + | # Append sensor message to output | ||
| + | if [ -n "$outputMess" ]; then | ||
| + | outputMess="$outputMess +++ "; | ||
| + | fi | ||
| + | outputMess="${outputMess}STATE WARNING - [`echo $line | cut -d : -f 7`:`echo $line | cut -d : -f 8`] `echo $line | cut -d : -f 10`" | ||
| + | ;; | ||
| + | ERROR) # Sensor ERROR state | ||
| + | if [ "$exitCode" -lt 2 ]; then | ||
| + | exitCode=2; | ||
| + | fi | ||
| + | # Append sensor message to output | ||
| + | if [ -n "$outputMess" ]; then | ||
| + | outputMess="$outputMess +++ "; | ||
| + | fi | ||
| + | outputMess="${outputMess}STATE CRITICAL - [`echo $line | cut -d : -f 7`:`echo $line | cut -d : -f 8`] `echo $line | cut -d : -f 10`" | ||
| + | ;; | ||
| + | esac | ||
| + | done < $tmp_file | ||
| + | |||
| + | # No warnings/errors detected | ||
| + | if [ "$exitCode" -eq 0 ]; then | ||
| + | outputMess=`uniq "$tmp_file_OK"`; | ||
| + | fi | ||
| + | ;; | ||
| + | *) | ||
| + | echo -ne "Command not found. \n" | ||
| + | exit 3 | ||
| + | ;; | ||
| + | esac | ||
| + | |||
| + | rm $tmp_file | ||
| + | rm $tmp_file_OK | ||
| + | echo -ne "$outputMess\n" | ||
| + | exit $exitCode | ||
| + | </code> | ||
| + | |||
| + | $ssh $user@$storage $query -delim : | ||
| + | <code> | ||
| + | ######### lsarray | ||
| + | mdisk_id:mdisk_name:status:mdisk_grp_id:mdisk_grp_name:capacity:raid_status:raid_level:redundancy:strip_size:tier:encrypt:distributed | ||
| + | 0:MDisk1:online:0:Pool01_SiteA:694.9TB:online:raid6:2:256:tier0_flash:yes:yes | ||
| + | ######### lshost | ||
| + | id:name:port_count:iogrp_count:status:site_id:site_name:host_cluster_id:host_cluster_name:protocol:owner_id:owner_name:portset_id:portset_name:partition_id:partition_name:draft_partition_id:draft_partition_name:ungrouped_volume_mapping:location_system_name | ||
| + | 0:svc01:2:4:online:::0:svccl01:scsi:::64:portset64:::::yes: | ||
| + | 1:svc02:2:4:online:::0:svccl01:scsi:::64:portset64:::::yes: | ||
| + | ######### lsdrive | ||
| + | id:status:error_sequence_number:use:tech_type:capacity:mdisk_id:mdisk_name:member_id:enclosure_id:slot_id:node_id:node_name:auto_manage:drive_class_id | ||
| + | 0:online::member:tier0_flash:52.4TB:0:MDisk1:0:1:19:::inactive:0 | ||
| + | 1:online::member:tier0_flash:52.4TB:0:MDisk1:1:1:5:::inactive:0 | ||
| + | 2:online::member:tier0_flash:52.4TB:0:MDisk1:2:1:11:::inactive:0 | ||
| + | 3:online::member:tier0_flash:52.4TB:0:MDisk1:3:1:15:::inactive:0 | ||
| + | 4:online::member:tier0_flash:52.4TB:0:MDisk1:4:1:7:::inactive:0 | ||
| + | 5:online::member:tier0_flash:52.4TB:0:MDisk1:5:1:16:::inactive:0 | ||
| + | 6:online::member:tier0_flash:52.4TB:0:MDisk1:6:1:13:::inactive:0 | ||
| + | 7:online::member:tier0_flash:52.4TB:0:MDisk1:7:1:17:::inactive:0 | ||
| + | 8:online::member:tier0_flash:52.4TB:0:MDisk1:8:1:20:::inactive:0 | ||
| + | 9:online::member:tier0_flash:52.4TB:0:MDisk1:9:1:21:::inactive:0 | ||
| + | 10:online::member:tier0_flash:52.4TB:0:MDisk1:10:1:12:::inactive:0 | ||
| + | 11:online::member:tier0_flash:52.4TB:0:MDisk1:11:1:18:::inactive:0 | ||
| + | 12:online::member:tier0_flash:52.4TB:0:MDisk1:12:1:10:::inactive:0 | ||
| + | 13:online::member:tier0_flash:52.4TB:0:MDisk1:13:1:8:::inactive:0 | ||
| + | 14:online::member:tier0_flash:52.4TB:0:MDisk1:14:1:9:::inactive:0 | ||
| + | 15:online::member:tier0_flash:52.4TB:0:MDisk1:15:1:14:::inactive:0 | ||
| + | 16:online::member:tier0_flash:52.4TB:0:MDisk1:16:1:6:::inactive:0 | ||
| + | ######### lsmdiskgrp | ||
| + | id:name:status:mdisk_count:vdisk_count:capacity:extent_size:free_capacity:virtual_capacity:used_capacity:real_capacity:overallocation:warning:easy_tier:easy_tier_status:compression_active:compression_virtual_capacity:compression_compressed_capacity:compression_uncompressed_capacity:parent_mdisk_grp_id:parent_mdisk_grp_name:child_mdisk_grp_count:child_mdisk_grp_capacity:type:encrypt:owner_type:owner_id:owner_name:site_id:site_name:data_reduction:used_capacity_before_reduction:used_capacity_after_reduction:overhead_capacity:deduplication_capacity_saving:reclaimable_capacity:easy_tier_fcm_over_allocation_max:provisioning_policy_id:provisioning_policy_name:replication_pool_link_uid | ||
| + | 0:Pool01_SiteA:online:1:13:694.22TB:2048:654.21TB:40.00TB:40.00TB:40.00TB:5:80:auto:balanced:no:0.00MB:0.00MB:0.00MB:0:Pool01_SiteA:0:0.00MB:parent:yes:none:::::no:0.00MB:0.00MB:0.00MB:0.00MB:0.00MB:100%:::7D97EF5B263D688Exxxxxxxxxxxxxxxxxxxx | ||
| + | ######### lsmdisk | ||
| + | id:name:status:mode:mdisk_grp_id:mdisk_grp_name:capacity:ctrl_LUN_#:controller_name:UID:tier:encrypt:site_id:site_name:distributed:dedupe:over_provisioned:supports_unmap | ||
| + | 0:MDisk1:online:array:0:Pool01_SiteA:694.9TB::::tier0_flash:yes:::yes:no:yes:yes | ||
| + | ######### lsvdisk | ||
| + | id:name:IO_group_id:IO_group_name:status:mdisk_grp_id:mdisk_grp_name:capacity:type:FC_id:FC_name:RC_id:RC_name:vdisk_UID:fc_map_count:copy_count:fast_write_state:se_copy_count:RC_change:compressed_copy_count:parent_mdisk_grp_id:parent_mdisk_grp_name:owner_id:owner_name:formatting:encrypt:volume_id:volume_name:function:volume_group_id:volume_group_name:protocol:is_snapshot:snapshot_count:volume_type:replication_mode:is_safeguarded_snapshot:safeguarded_snapshot_count:restore_in_progress | ||
| + | 0:vol_siteA_001:0:io_grp0:online:0:Pool01_SiteA:4.00TB:striped:::::60050xxxxxxxxxx10000000000000000:0:1:not_empty:0:no:0:0:Pool01_SiteA:::yes:yes:0:vol_siteA_001::::scsi:no:0:::no:0:no | ||
| + | 1:vol_siteA_002:0:io_grp0:online:0:Pool01_SiteA:4.00TB:striped:::::60050xxxxxxxxxx10000000000000001:0:1:not_empty:0:no:0:0:Pool01_SiteA:::yes:yes:1:vol_siteA_002::::scsi:no:0:::no:0:no | ||
| + | 2:vol_siteA_003:0:io_grp0:online:0:Pool01_SiteA:4.00TB:striped:::::60050xxxxxxxxxx10000000000000002:0:1:not_empty:0:no:0:0:Pool01_SiteA:::yes:yes:2:vol_siteA_003::::scsi:no:0:::no:0:no | ||
| + | ######### lsenclosure | ||
| + | id:status:type:managed:IO_group_id:IO_group_name:product_MTM:serial_number:total_canisters:online_canisters:total_PSUs:online_PSUs:drive_slots:total_fan_modules:online_fan_modules:total_sems:online_sems | ||
| + | 1:online:control:yes:0:io_grp0:4657-924:78xxxxx:2:2:2:2:24:0:0:0:0 | ||
| + | ######### lsenclosurebattery | ||
| + | enclosure_id:battery_id:status:charging_status:recondition_needed:percent_charged:end_of_life_warning:canister_id:battery_slot | ||
| + | 1:1:online:idle:no:100:no:1:1 | ||
| + | 1:2:online:idle:no:100:no:2:1 | ||
| + | ######### lsenclosurecanister | ||
| + | enclosure_id:canister_id:status:type:node_id:node_name | ||
| + | 1:1:online:node:2:node2 | ||
| + | 1:2:online:node:1:node1 | ||
| + | ######### lsenclosurepsu | ||
| + | enclosure_id:PSU_id:status:input_power | ||
| + | 1:1:online:ac | ||
| + | 1:2:online:ac | ||
| + | ######### lsenclosureslot | ||
| + | enclosure_id:slot_id:port_1_status:port_2_status:drive_present:drive_id:row:column | ||
| + | 1:1:::no::: | ||
| + | 1:2:::no::: | ||
| + | 1:3:::no::: | ||
| + | 1:4:::no::: | ||
| + | 1:5:::yes:1:: | ||
| + | 1:6:::yes:16:: | ||
| + | 1:7:::yes:4:: | ||
| + | 1:8:::yes:13:: | ||
| + | ... | ||
| + | </code> | ||
| + | |||
| + | On SVC | ||
| + | <code> | ||
| + | ######### lsnode | ||
| + | id:name:UPS_serial_number:WWNN:status:IO_group_id:IO_group_name:config_node:UPS_unique_id:hardware:iscsi_name:iscsi_alias:panel_name:enclosure_id:canister_id:enclosure_serial_number:site_id:site_name | ||
| + | 1:svcaxx01::50050xxxx000yyD:online:0:io_grp0:yes::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcaxx01::78xxxxD::1::1:siteA | ||
| + | 6:svcbxx01::50050xxxx000yyA4:online:0:io_grp0:no::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcbxx01::78xxxxC::1::2:siteB | ||
| + | 3:svcaxx02::50050xxxx000yy5F:online:1:io_grp1:no::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcaxx02::78xxxxL::1::1:siteA | ||
| + | 4:svcbxx02::50050xxxx000yy5D:online:1:io_grp1:no::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcbxx02::78xxxxN::1::2:siteB | ||
| + | ######### lsnodebattery | ||
| + | node_id:node_name:battery_id:status:charging_status:recondition_needed:node_percentage_charge:end_of_life_warning | ||
| + | 1:svcaxx01:1:online:idle:no:100:no | ||
| + | 6:svcbxx01:1:online:idle:no:100:no | ||
| + | 3:svcaxx02:1:online:idle:no:100:no | ||
| + | 4:svcbxx02:1:online:idle:no:100:no | ||
| + | </code> | ||
storage/svc_scripts.1731453208.txt.gz ยท Last modified: 2024/11/13 00:13 by manu
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
