wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Linux kernel boot process ======

During boot process, the system will read the grub config to be able to load the kernel with it associated modules containing into initrd.

Initial RAM disk (initrd or Initramfs) is a RAM filesystem mounted at startup to initialize kernel modules.

===== Initrd =====

Rebuild initrd
<cli prompt='#'>
# dracut -f
</cli>

Another example to add multipathing
<cli prompt='#'>
# dracut --force --add multipath
</cli>

**Regenerating the initramfs**
  * Adding Drivers Because of Hardware Changes
  * Moving System Directories to a RAID or LVM
  * Adding Disks to an LVM Group or Btrfs RAID Containing the Root File System
  * Changing Kernel Variables (sysctl)
  * Adding or removing swap devices, re-creating swap area, it required also to recreate grub

You can read the content of initrd 
<cli prompt='#'>
# lsinitramfs /boot/initrd.img
</cli>

Uncompress initrd 
<cli prompt='#'>
# mkdir /tmp/initrd
# cd /tmp/initrd
# cp /boot/initrd.img .
# unmkinitramfs initrd.img .
</cli>

===== Grub =====

Generate a new grub.cfg on BIOS based server
<cli prompt='#'>
# grub2-mkconfig -o /boot/grub2/grub.cfg
</cli>

Generate a new grub.cfg on UEFI based server
<cli prompt='#'>
# grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
</cli>

Check the syntax of grub.cfg
<cli prompt='#'>
# grub2-script-check /boot/grub2/grub.cfg
</cli>

wiki

User Tools

Site Tools

Page Tools