wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Some tips for using the SVC and Storwize V7000 Command Line Interface ======

The SVC and Storwize V7000 offers a command line interface that you access via SSH.   You start your favorite SSH client (such as PuTTY or Mindterm) and then logon as admin or as your own user-id.   Right now to do this you need to generate a private/public key pair, although with release 6.3 (which will be available November 2011), you will be able to logon via SSH using just a user-id and password.

Having logged on there are three categories of commands you can issue:

  svcinfo:    Informational commands that let you examine your configuration.
  svctask:   Task commands that let you change your configuration.
  satask:     Service commands that are only used in specific circumstances.
  sainfo:     Service information.
  svcconfig:  To backup, clear, recover or restore

There are several CLI usability features that I routinely find users are not aware of, so I thought I would share some of them here:

==== Hidden commands ====

Get the real time of a node:
<cli prompt='>'>
IBM_FlashSystem:V5100-02:superuser>svqueryclock
Fri Nov  5 14:53:21 CET 2021
</cli>

__Reference__

http://cmhramblings.blogspot.com/2015/08/svc-mini-script-storage.html

http://db94.net:8080/wtf/pmwiki.php?n=Main.HandySVCMiniScripts

https://www.ibm.com/developerworks/mydeveloperworks/groups/service/html/communityview?communityUuid=ce5f40da-a393-4569-b283-4810e0aa31ce

http://rogerluethy.wordpress.com/2011/11/02/some-tips-for-using-the-svc-and-storwize-v7000-command-line-interface/

http://aussiestorageblog.wordpress.com/2011/11/02/some-tips-for-using-the-svc-and-storwize-v7000-command-line-interface/

==== Change IP on cluster and service ==== 

<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> 
SYS_2076:ifscluster-svt2:superuser>chsystemip -clusterip 9.71.16.63 -gw 9.71.16.1 -mask 255.255.255.0 -port 1
</cli>

If connecting to a different subnet, replace the old cable connection with the new cable connection and run the lssystemip command. For example:
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> 
SYS_2076:ifscluster-svt2:superuser>lssystemip
cluster_id cluster_name location port_id IP_address subnet_mask gateway IP_address_6 prefix_6 gateway_6
00000200A9C0089E ifscluster-svt2 local 1 9.71.16.63 255.255.255.0 9.71.16.1
00000200A9C0089E ifscluster-svt2 local 2
</cli>

In the management GUI, click General->Settings->Networks->Service IP, or use the satask chserviceip command to change the service IP address for node canister 1 and its associated subnet mask and default gateway. For example:
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> 
SYS_2076:ifscluster-svt2:superuser>sainfo lsservicenodes
panel_name cluster_id cluster_name node_id node_name relation node_status error_data
01-1 00000200A9C0089E ifscluster-svt2 1 node1 local Active
01-2 00000200A9C0089E ifscluster-svt2 2 node2 partner Active
satask chserviceip -serviceip 9.71.16.68 -gw 9.71.16.1 -mask 255.255.255.0
</cli>

Use the satask chserviceip command to change the service IP address for node canister 2 and its associated subnet mask and default gateway. For example:
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> 
SYS_2076:ifscluster-svt2:superuser> satask chserviceip -serviceip 9.71.16.69 -gw 9.71.16.1 -mask 255.255.255.0 01-2
</cli>

==== Stop/Reboot a node canister ====

<cli prompt='#'>
satask -- stopnode -- --+- -poweroff -+-- --+------------+-><
                            +- -reboot----+     '-panel_name-'   
                            '- -warmstart '                      
</cli>                            

==== Adding nodes to a cluster ====

Now that you have defined a basic cluster, you will want to add more nodes to it. Start by listing out all the unattached nodes
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svcinfo lsnodecandidate
</cli>

this will list out all SVC nodes that have not been assigned to clusters yet. The next task is to add one of these nodes to your cluster, and you identify it by either its WWN or panelname, which is straightforward, except that they are called id and node-cover-name in the lsnodecandidate listing.

So you add a new node with either
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask addnode -panelname node-cover-name -iogrp N
</cli>
or
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask addnode -wwnodename id -iogrp N
</cli>

the N in -iogrp is an integer between 0 and 3. Remember that an IO group consists of two, and only two nodes, so the first node you add will go to iogrp0 and will be paired with the original node. Add extra nodes in pairs.

==== Managing mDisks and MDGs ====

An mDisk corresponds to a LUN as presented by the controller of the attached storage subsystem, so you don't create mDisks, you detect them. To do this, use the command
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask detectmdisk
</cli>

then follow with
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svcinfo lsmdisk -delim| -nohdr
</cli>

to see what disks have been picked up. The -delim| parameter separates the fields in the command output with a | rather than a lot of spaces, so the output will hopefully not span lines. -nohdr will suppress the header.
Next you need to define a managed disk group with datareduction (deduplication)
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask  mkmdiskgrp -name MDGDS4FC001 -ext 1024 -datareduction yes -mdisk mdisk2
</cli>



Next you need to define a managed disk group with the command
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask  mkmdiskgrp -name MDGDS4FC001 -ext 64 -mdisk mdisk2
</cli>

In this case, I'm creating an MDG called MDGDS4FC001 with a 64 MB stripe size (the default is 16MB) and adding an mdisk called mdisk2 to it. You can add more mdisks by separating them with commas in the command above or you can add them to an existing MDG with the command
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask addmdisk -mdisk mdisk3 MDGDS4FC001
</cli>

To check out the status of a managed disk group use the command
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svcinfo lsmdiskgrp -delim| 
</cli>

On v7000, v5000, v3000, you have to create mdisk (array), and add it to a pool (mdiskgroup)

create DRAID6 (best RAID, can be extend later)
<cli prompt='>'>
IBM_2076:V7000:admin> mkdistributedarray -driveclass 1 -drivecount 7 -level raid6 -rebuildareas 1 -strip 256 -stripewidth 6 Pool0
</cli>

create RAID5
<cli prompt='>'>
IBM_2076:V7000:admin> mkarray -level raid5 -drive 73:90:77:85:80:75:87 -strip 256 POOL01
</cli>

==== Vdisk and mirroring management ====

Create a basic vdisk with 10GB:
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>mkvdisk -mdiskgrp STGPool_DS3500-2 -iogrp io_grp0 -node 1 -size 10 -unit gb -name vol1
</cli>

Create a mirrored vdisk with 5120 MB:
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin> mkvdisk -copies 2 -iogrp io_grp0 -mdiskgrp STGPool_DS3500-2:STGPool_DS5000-1 -name test_mirror -size 5120
</cli>

Create 20 thin-provionned volumes:
<cli prompt='>'>
# Create 20 x 256GB volumes for MYLPAR in pool POOL_RAID5
IBM_2145:ITSO_SVC1:admin> for x in {1..20}
do
num=`printf "%02d" $x`
mkvdisk -autoexpand -cache readwrite -copies 1 -grainsize 256 -iogrp io_grp0 -mdiskgrp POOL_RAID5 -name MYLPAR_L$num -rsize 2% -size 256 -unit gb -vtype striped -warning 80%
done
</cli>

Expand a vdisk:
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin> expandvdisksize -size 5120 test_vol1
</cli>

Add a mirror copy of the disk in another pool (mdiskgroup), for information you can create a maximum of 2 copies: primary and secondary :
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>addvdiskcopy -mdiskgrp STGPool_DS5000-1 -vtype striped  -mirrorwritepriority redundancy -unit gb vol1
IBM_2145:ITSO_SVC1:admin>lsvdisksyncprogress
vdisk_id vdisk_name copy_id progress estimated_completion_time
23 vol1 1 48 120507203918
</cli>
The -mirrorwritepriority redundancy parameter destage write IO at same time on both copies, for better performances you can keep the default: latency.

List both copies, and state:
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>lsvdiskid 23
name Volume_no_mirror
IO_group_id 0
IO_group_name io_grp0
status online
mdisk_grp_id many
mdisk_grp_name many
capacity 1.00GB
type many
formatted no
mdisk_id many
mdisk_name many
.....
filesystem
mirror_write_priority redundancy

copy_id 0
status online
sync yes
primary yes
mdisk_grp_id 0
mdisk_grp_name STGPool_DS3500-1
...
copy_id 1
status online
sync yes
primary no
mdisk_grp_id 2
mdisk_grp_name STGPool_DS5000-1
</cli>

Remove the copy with ID 1:
<cli prompt='>'>
IBM_2145:ITSO_SVC2:superuser>rmvdiskcopy -copy 1 vol1
</cli>

Split the mirror in 2 independent vdisks with the name vol2split
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>splitvdiskcopy -copy 1 -iogrp 0 -name vol2split vol1
</cli>

In case of trouble, you can repair a copy:
  repairvdiskcopy 

==== Disk Migration using image mode ====

If you want to use a LUN from another storage array, you can use a transparent mode with external virtualization:
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask mkmdiskgrp -ext 1024 -name MigrationPool_1024
IBM_2145:SVC-CL-M:admin> svctask mkvdisk -iogrp io_grp0 -mdisk mdisk0 -mdiskgrp MigrationPool_1024 -name controller0_0000000000000000 -syncrate 80 -vtype image
</cli>

==== Managing Hosts ====

Next, you need to define your hosts to the SVC, but before you can do that, you need to know the WWPNs for the HBAs. Exactly how you do that will depend on what the host types are, so I'm going to assume that you know how to do this. There is a SVC Host Attachment Guide that will help you here.

Start by listing out all the unattached HBA ports that are zoned to the SVC.
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svcinfo lshbaportcandidate
</cli>
The port names will be 16 HEX digits like

10000000DE1A34F2 
10000000DF1045A2

Check that you can see the WWPNs that you are expecting, then define the host using (force if multiples WWN)
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask mkhost  -force name P1201234 -fcwwpn "210100E08B251EE6:210100F08C262EE7"
</cli>
Here I'm creating a host definition for server P1201234 and connecting it with one port. You can add both WWPNs in the command above by separating them with a colon, or you can add the second using
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask addhostport -fcwwpn 10000000DF1045A2 P1201234
</cli>

You can check to status of all the hosts, or an individual host with these commands
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svcinfo lshost 
IBM_2145:SVC-CL-M:admin> svcinfo lshost P1201234
</cli>
Finally, map the virtual disk to the host
<cli prompt='>'>
IBM_2145:SVC-CL-M:admin> svctask mkvdiskhostmap -host P1201234 VDAIX000
</cli>

==== Working with disk replication ====

List all consistency groups, volumes are synchronized from site 1 to site 2:
<cli prompt='>'>
root@nim - /root > ssh admin@svc2 lsrcconsistgrp -delim : | awk 'NR>1'
0:prod1ws1:0000020060218D2C:SVC-1:0000020060418CCE:SVC-2:master:consistent_synchronized:3:metro::
1:prod1ws2:0000020060218D2C:SVC-1:0000020060418CCE:SVC-2:master:consistent_synchronized:3:metro::
2:prod1as1:0000020060218D2C:SVC-1:0000020060418CCE:SVC-2:master:consistent_synchronized:7:metro::
3:prod1as2:0000020060218D2C:SVC-1:0000020060418CCE:SVC-2:master:consistent_synchronized:7:metro::
4:prod1ds1:0000020060218D2C:SVC-1:0000020060418CCE:SVC-2:master:consistent_synchronized:22:metro::
</cli>

Stop replication on consistency group **prod1ws1**, and allow write access to disks on remote site
<cli prompt='>'>
root@nim - /root > ssh admin@svc2 stoprcconsistgrp -access prod1ws1
</cli>

Reverse the replication from site 2 to site 1 (failover):
<cli prompt='>'>
root@nim - /root > ssh admin@svc1 startrcconsistgrp -force -primary aux prod1ws1
</cli>

Change again to fallback, site 1 to site 2
<cli prompt='>'>
root@nim - /root > ssh admin@svc1 switchrcconsistgrp -primary master prod1ws1
</cli>

===== Advanced fonctions SVC and storwize =====

First step, check your license (lslicense), else update it according to what you paid. External virtualization can be used for 45 days for migration period.

==== Quorum best proctice for SVC ====

One disk quorum per site, and 1 or 2 IP quorum on third site
<cli prompt='>'>
IBM_2145:SVC:report>lsquorum
quorum_index status id  name           controller_id controller_name active object_type override site_id site_name
0            online 279 v7ks1-vdisk1   17            v7ks1-node1     no     mdisk       no       1       SITE1
1            online 250 v7ks1-vdisk1   15            v7ks2-node1     no     mdisk       no       2       SITE2
3            online                                                  yes    device      no               srvquorum1.xxx.lu/10.10.10.10
4            online                                                  no     device      no               srvquorum2.xxx.lu/10.10.10.11
</cli>


==== Change system layer (for replication or external virtualization) ====

The system layer is an exclusive option, you can work with external virtualization or replication, but not both together. SVC has a special appliance layer (equivalent to replication). Default layer for storwize is storage
<cli prompt='>'>
admin@v7000 >chsystem -layer replication | storage
</cli>

**Note:** If you specify -layer you must specify either replication or storage. This option can be changed if no other systems are visible on the fabric, and no system partnerships are defined. 

  For external virtualization, source storwize must have storage layer and target replication layer.
  For metro / global mirror, both storwize must have the same layer (storage or replication).
  If you set replication layer, you cannot provide storage for SVC, or storwize v7000 and v5000

//Error// on a storwize v3700, v5000 or v7000, unable to use external virtualization, the storwize to virtualize is not seen as a controller, but like node or host or unknown --> change the system layout to storage.

//Error// using replication metro mirror (PPRC) or global mirror --> change the system layout on all devices to have the same virtualization layer

==== Enable SVC NPIV (required in v8.7) ====

Here we talk about SVC FC port virtualization, host with NPIV is supported for a long time.

=== Change from Not virtualized to Transitional ===

Enabling NPIV target port functionality on a new cluster
After creating the cluster, but before starting to add hosts, issue 
<cli>
  chiogrp -fctargetportmode transitional <IO group> 
</cli>
on each populated I/O group. 

=== Update the zoning for ports connected to hosts ===

    Ensure that the hosts are using the NPIV ports for host I/O. To verify that you are logged in to these hosts with these NPIV ports, enter the following command
<cli>
lsfabric -host host_id_or_name
</cli>
Wait a minimum of 15 minutes before you move from transitional to enabled state. 

=== Change from Transitional to NPIV ===

To change the NPIV setting to enabled, enter the following command:
<cli>
chiogrp -fctargetportmode enabled
</cli>

on each populated I/O group.
If using WWPN based zoning, issue the command to view the set of FC ports. 
<cli>
  lstargetportfc 
</cli>
All ports that display virtualized=yes need to be zoned into hosts as described above.

==== Create a metro / global mirror partnership using FC ====

This procedure is the same for Metro (synchronous replication) and Global Mirror (asynchronous), at the end a special note for Global Mirror.

**Example with PPRC between SVC and V7000**

First create the right SAN zoning between SVc and V7000

Check candidate for replication on all array or SVC
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>lspartnershipcandidate
id configured name
00000200A0C006B2  no ITSO-Storwize-V7000-2
</cli>

<cli prompt='>'>
ITSO-Storwize-V7000-2:admin>lspartnershipcandidate
id configured name
000002006BE04FC4 no ITSO_SVC1
</cli>

As of code level 6.3, you can create a partnership between an SVC system and a Storwize V7000 system if you first change the layer setting on the Storwize V7000 from storage to replication with the chsystem -layer command. This option can only be used if no other systems are visible on the fabric, and no system partnerships are defined. SVC systems are always in the appliance layer

Pre-verification of system configuration
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>lspartnership
id name location partnership bandwidth
000002006BE04FC4 ITSO_SVC1 local
ITSO-Storwize-V7000-2:admin>lspartnership
id name location partnership bandwidth
00000200A0C006B2 ITSO-Storwize-V7000-2 local
</cli>

Check the system layer on all systems (SVC and V7000)
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>lssystem
id 000002006BE04FC4
name ITSO_SVC1
location local
partnership
bandwidth
....
id_alias 000002006BE04FC4
gm_link_tolerance 300
gm_inter_cluster_delay_simulation 0
gm_intra_cluster_delay_simulation 0
gm_max_host_delay 5
email_reply
email_contact
auth_service_type tip
relationship_bandwidth_limit 25
has_nas_key no
layer appliance

ITSO-Storwize-V7000-2:admin> lssystem
id 00000200A0C006B2
name ITSO-Storwize-V7000-2
location local
partnership 
...
gm_link_tolerance 300
gm_inter_cluster_delay_simulation 0
gm_intra_cluster_delay_simulation 0
gm_max_host_delay 5
...
relationship_bandwidth_limit 25
...
has_nas_key no
layer storage
rc_buffer_size 48
...
local_fc_port_mask 1111111111111111111111111111111111111111111111111111111111111111
partner_fc_port_mask 1111111111111111111111111111111111111111111111111111111111111111
high_temp_mode off
topology standard
topology_status 
rc_auth_method none
</cli>

As you can see, the layer has to be changed on the V7000 as replication (then the V7000 can't provide anymore disks to SVC, only replication will be allowed)
  chsystem -layer replication

== Establishing the partnership ==

In Example, a partnership is created between ITSO_SVC1 and ITSO-Storwize-V7000-2, specifying
50 MBps bandwidth to be used for the background copy. To check the status of the newly created partnership, issue the lspartnership command.
Also notice that the new partnership is only partially configured. It remains partially
configured until the Metro Mirror partnership is created on the other node.

Creating the partnership from ITSO_SVC1 to ITSO-Storwize-V7000-2 and verifying it
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>lspartnership
IBM_2145:ITSO_SVC1:admin>mkfcpartnership -linkbandwidthmbits 1024 -backgroundcopyrate 25 ITSO-Storwize-V7000-2
IBM_2145:ITSO_SVC1:admin>lspartnership
id name location partnership bandwidth type
000002006BE04FC4 ITSO_SVC1 local
00000200A0C006B2 ITSO-Storwize-V7000-2 remote partially_configured_local 50 fc
</cli>
 
In Example, the partnership is created between ITSO-Storwize-V7000-2 back to ITSO_SVC1, specifying
the bandwidth to be used for a background copy of 50 MBps.
After creating the partnership, verify that the partnership is fully configured on both systems
by reissuing the lspartnership command.

Creating the partnership from ITSO-Storwize-V7000-2 to ITSO_SVC1 and verifying it
<cli prompt='>'>
ITSO-Storwize-V7000-2:admin>lspartnership
ITSO-Storwize-V7000-2:admin>mkfcpartnership -linkbandwidthmbits 1024 -backgroundcopyrate 25 ITSO_SVC1
ITSO-Storwize-V7000-2:admin>lspartnership
id name location partnership bandwidth type
00000200A0C006B2 ITSO-Storwize-V7000-2 local
000002006BE04FC4 ITSO_SVC1 remote fully_configured 50 fc
</cli>

**For Global Mirror**, steps are the same as Metro Mirror, and then you have to adapt the timeout values:
<cli prompt='>'>
IBM_2145:ITSO_SVC1:admin>chsystem -gminterdelaysimulation 20
IBM_2145:ITSO_SVC1:admin>chsystem -gmintradelaysimulation 40
IBM_2145:ITSO_SVC1:admin>chsystem -gmlinktolerance 200
</cli> 

==== Manualy upgrade controler firmware/software/reset drives status ====

If you have pending upgrade on drives, for a long time and never end
<cli prompt='>'>
IBM_Storwize:v3700-Quorum:superuser>lsdriveupgradeprogress 
id  status        estimated_completion_time 
0   not_scheduled                                                     
7   not_scheduled                                         
51  completed     221013120044              
52  completed     221013120550              
53  completed     221013121056              
54  completed     221013121602
</cli>

Reset the status to **not_scheduled**

First copy firmware and test upgrade tool into /home/admin/upgrade
<cli prompt='>'>
IBM_Storwize:v3700-Quorum:superuser>lsdumps -prefix /home/admin/upgrade
id filename
0  IBM_StorwizeV3000_INSTALL_upgradetest_30.6
1  IBM2072_INSTALL_7.8.1.11
</cli>

Second install the upgrade test else firmware can't be installed
<cli prompt='>'>
IBM_Storwize:v3700-Quorum:superuser>applysoftware -file IBM_StorwizeV3000_INSTALL_upgradetest_30.6
</cli>

Third start test utility
<cli prompt='>'>
IBM_Storwize:v3700-Quorum:superuser>svcupgradetest -v 7.8.1.11
svcupgradetest version 30.6

Please wait, the test may take several minutes to complete.


******************* Warning found *******************

The audit log of the system was cleared to prepare for the upgrade.
The old audit log can be found in /dumps/audit/ on this node.

******************** Error found ********************

The system has at least one node canister with only 4GB of RAM installed
This will prevent an upgrade to 7.8.1.11 from succeeding.
Please contact your sales representative for information on obtaining an
8GB RAM upgrade.Instructions on how to install the RAM upgrade are available on the
following Knowledge Center page:
sh: /usr/bin/grep: No such file or directory
sh: /usr/bin/grep: No such file or directory
Traceback (most recent call last):
  File "/home/utilities/svcupgradetest/delete_old_dumps.py", line 96, in <module>
    clear_dump(nodes[node]._id, dump['filename'])
  File "/home/utilities/svcupgradetest/delete_old_dumps.py", line 75, in clear_dump
    command = ['/compass/bin/svctask', 'cleardumps', '-prefix', '{}/{}'.format(DUMPS_DIR, dump_name), 
    node_id]
ValueError: zero length field name in format
https://www.ibm.com/support/knowledgecenter/en/STLM5A/com.ibm.storwize.v3700.710.doc/v3500_qi_installing_memory_module.html
******************* Warning found *******************

There was a problem deleting old dumps.
Please contact your support representative.

Results of running svcupgradetest:
==================================

The tool has found 1 errors and 2 warnings.
One issue will prevent the system being
updated to 7.8.1.11 until it has been resolved
</cli>

If it keeps schedules pending, then restart **tomcat**
<cli prompt='>'>
IBM_Storwize:v3700:superuser> satask restartservice -service tomcat
IBM_Storwize:v3700:superuser> satask restartservice -service cimom
</cli>
Wait about 5 min and then retry the upgrade

Now you are ready to upgrade the new firmware
<cli prompt='>'>
IBM_Storwize:v3700-Quorum:superuser>applysoftware -file IBM2072_INSTALL_7.8.1.11
</cli>

Use the following command to check the upgrade progress, take care it will stay on 0, after it will switch to 50% after reboot of first controller...
<cli prompt='>'>
IBM_Storwize:v3700-Quorum:superuser> lsupdate
</cli>

====== SVC changing topology for enhanced stretch cluster ======

== Configuration steps ==

These additional configuration steps can be done by using the command-line interface (CLI) or the management GUI.

    Each SAN Volume Controller node in the system must be assigned to a site. Use the chnode CLI command.
    Each back-end storage system must be assigned to a site. Use the chcontroller CLI command.
    Each host must be assigned to a site. Use the chhost CLI command
    After all nodes, hosts, and storage systems are assigned to a site, the enhanced mode must be enabled by changing the system topology to stretched.
    For best results, configure an enhanced stretched system to include at least two I/O groups (four nodes). A system with just one I/O group cannot guarantee to maintain mirroring of data or uninterrupted host access in the presence of node failures or system updates.


===== Scripts ======

<code>
get_ibm_svc_volumes ()
{

svclogin=admin
for storage in svc
do
  ssh $svclogin@$storage lssystem -delim : > $PATH_DATA/$storage.lssystem
  manufacturer="IBM"
  model=$(grep '^product_name:' $PATH_DATA/$storage.lssystem | rev | awk '{print $1}' | rev)
  storage_name=$(grep '^name:' $PATH_DATA/$storage.lssystem | cut -d':' -f2)
  ssh $svclogin@$storage lsvdisk -unit gb -delim ':' > $PATH_DATA/$storage.lsvdisk
  ssh $svclogin@$storage lshostvdiskmap -delim ':' > $PATH_DATA/$storage.lshostvdiskmap
  for fullserial in $(cat $PATH_DATA/$storage.lsvdisk | awk -F':' '{print $14}' | grep -v '^vdisk_UID')
  do
    serial=$(echo $fullserial | cut -c1-28)
    vol_id=$(echo $fullserial | cut -c29-)
    vol=$(cat $PATH_DATA/$storage.lsvdisk | grep $fullserial | awk -F':' '{print $2";"$8";"$6";"$7}' | sed 's/GB;/;/')
    VG=$(cat $PATH_DATA/$storage.lshostvdiskmap | grep $fullserial | cut -d':' -f1,2 | sort -u)
    if [ "$VG" == "" ]
    then
      echo "${manufacturer};${model};${storage_name};${serial};${vol_id};${vol};;;${serial}${vol_id}"
    else
      for VG_name in $(echo $VG | sed 's/:/;/')
      do
        echo "${manufacturer};${model};${storage_name};${serial};${vol_id};${vol};${VG_name};${serial}${vol_id}"
      done
    fi
  done
done
}
get_ibm_svc_volumes >> $csvfile

</code>

==== Sandbox commands ====

Print only vdisk (volume) name and size in byte
<cli prompt='>'>
IBM_Storwize:V3K01:superuser>lsvdisk -filtervalue name=* -delim : -nohdr -bytes | cut -d':' -f2,8
DC1-TSM02-01:805306368000
DC1-TSM02-02:805306368000
DC1-TSM02-03:8903467204608
DC1-TSM02-04:8903467204608
DC1-TSM02-05:8903467204608
DC1-TSM02-06:8903467204608
DC1-LT-01:3858759680000
</cli>

Print only vdisk (volume) name starting with TOTO
<cli prompt='>'>
IBM_Storwize:V3K01:superuser>lsvdisk -filtervalue name=TOTO* -nohdr -delim ,
0,TOTOTSM02-01,0,io_grp0,online,0,Pool-NL,750.00GB,striped,,,,,60050763008103FAE800000000000000,0,1,not_empty,0,no,0,0,Pool-NL,no,no,0,,
</cli>


**Generate command to recreate the same volumes** as current on pool1
<cli prompt='>'>
IBM_Storwize:V3K01:superuser>lsvdisk -filtervalue name=* -delim : -nohdr -bytes | cut -d':' -f2,8 | sed 's/:/\ /' | while read x y; do echo mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size $y -unit b -name $x; done 
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 805306368000 -unit b -name TSM02-01
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 805306368000 -unit b -name TSM02-02
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 8903467204608 -unit b -name TSM02-03
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 8903467204608 -unit b -name TSM02-04
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 8903467204608 -unit b -name DCAV-PRTSM02-05
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 8903467204608 -unit b -name DCAV-PRTSM02-06
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 3858759680000 -unit b -name DCAS-EVAULT-01
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 2199023255552 -unit b -name DCAV-DMZ-VMFS-TIPRTSM02-01
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 6597069766656 -unit b -name DCAV-PRVEECC01-01
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 6871947673600 -unit b -name DCAS-V3K01-VMFS18-TMP
mkvdisk -mdiskgrp pool1 -iogrp io_grp0 -size 1099511627776 -unit b -name DCAV-PRTSM02-99
</cli>

===== Users management =====

==== Groups ====

List groups:
<cli prompt='>'>
IBM_FlashSystem:fs7300:user01> lsusergrp
id name            role            remote owner_id owner_name
0  SecurityAdmin   SecurityAdmin   no
1  Administrator   Administrator   no
2  CopyOperator    CopyOperator    no
3  Service         Service         no
4  Monitor         Monitor         no
5  RestrictedAdmin RestrictedAdmin no
</cli>

==== Users ====

Create a new user with a password:
<cli prompt='>'>
IBM_FlashSystem:fs7300:user01> mkuser -name user02 -usergrp SecurityAdmin -password xxxxxx
</cli>

List all users
<cli prompt='>'>
IBM_FlashSystem:fs7300:user01> lsuser
id name           password ssh_key remote usergrp_id usergrp_name
0  superuser      yes      yes     no     0          SecurityAdmin
1  user02         yes      no      no     0          SecurityAdmin
3  report         no       yes     no     4          Monitor
</cli>

Create a user with ssh key axchange

  * Copy the public key from you user to **/home/admin/upgrade**
<cli prompt='#'>
[root@lnx01]/storage/.ssh # scp /storage/.ssh/id_ecdsa.pub user01@fs7300:/home/admin/upgrade
Password:
id_ecdsa.pub                                                              100%  284   411.6KB/s   00:00
</cli>

  * Create a user and import the ssh key
<cli prompt='>'>
IBM_FlashSystem:fs7300:user01>mkuser -name report -usergrp Monitor -keyfile /home/admin/upgrade/id_ecdsa.pub
User, id [8], successfully created
</cli>
     
     
===== Replace SVC node ======

<cli>
satask installsoftware -file IBM_5.0.12 -ignore
</cli>

<cli>
sainfo lsservicenode
</cli>


<cli>
satask chvpd -wwnn 500507680F00FFFF -fcportmap 11-11,12-12,13-13,14-14,21-21,22-22,23-23,24-24
</cli>
wiki

User Tools

Site Tools

Page Tools
