====== Backup with Bacula opensource ======
https://tyler-hitzeman.github.io/bacula/install-server.html
dnf install postgresql-server
postgresql-setup initdb
systemctl enable --now postgresql
sudo su - postgres
$ createuser bacula
$ psql
psql (10.14)
Type "help" for help.
postgres=# ALTER USER bacula PASSWORD 'bacula';
ALTER ROLE
postgres=# ALTER USER bacula LOGIN SUPERUSER CREATEDB CREATEROLE;
ALTER ROLE
postgres=# \q
$ exit
logout
Now you should uncomment the following setting in the /var/lib/pgsql/data/postgresql.conf file:
listen_addresses = 'localhost'
Now you need to change the connection configuration to the following format in the /var/lib/pgsql/data/pg_hba.conf file:
connection configuration of bacula on centos
Finally, you must restart the service using the following command to apply the changes:
systemctl restart postgresql.service
dnf install bacula-director bacula-storage bacula-console bacula-client
You can create databases, tables, and privileges by following the instructions below. Note that you must run them on behalf of the newly created Bacula user:
cd /usr/libexec/bacula/
sudo -u bacula ./create_postgresql_database
sudo -u bacula ./make_postgresql_tables
sudo -u bacula ./grant_postgresql_privileges
How to Configure Bacula on CentOS 8
In this section, we will teach you how to configure Bacula. It should note that you can use the following commands to create any folder to save backups and set bacula as its owner:
mkdir /opt/bacula
chown bacula:bacula /opt/bacula
Next, you need to open the /etc/bacula/bacula-dir.conf file and find the FileSet section called Full Set. Then here, in the Include section, you can set the folders needed for backup. Add /opt/bacula in the Exclude section:
FileSet { Name = "Full Set" Include { ... File = /home/user File = /folder/to/backup } Exclude { File = /opt/bacula … }}
After successfully completing the previous step, you should now open the /etc/bacula/bacula-sd.conf file and set Archive Device = /opt/bacula for both Devices:
Device { ... Archive Device = /opt/bacula ... }
You can now start the service using the following commands:
systemctl enable --now bacula-dir.service
systemctl enable --now bacula-fd.service
systemctl enable --now bacula-sd.service
Note that the folders specified in the Include section of FileSet are now backed up daily. You can go to the Bacula Management Console using the following command to start the backup:
bconsole
Then enter the run command and follow the instructions. You can use the restore command to recover files. You can also enter status to view scheduled jobs, and then 1. Type help to see all available commands.
# dnf install perl-DBD-Pg
Interface
https://www.bacula.org/11.0.x-manuals/en/console/Baculum_API_Web_GUI_Tools.html
https://www.bacula.org/downloads/baculum/stable-11/centos8/
==== Test access to database ====
I use Postgres
root@...:/etc/bacula# bacula-dir -t -d 100
bacula-dir: dird.c:185-0 Debug level = 100
bacula-dir: dir_plugins.c:160-0 Load dir plugins
bacula-dir: dir_plugins.c:162-0 No dir plugin dir!
bacula-dir: postgresql.c:1126-0 db_init_database first time
bacula-dir: postgresql.c:241-0 pg_real_connect done
bacula-dir: postgresql.c:243-0 db_user=bacula db_name=bacula db_password=
bacula-dir: dird.c:993 Could not open Catalog "MyCatalog", database "bacula".
bacula-dir: dird.c:998 postgresql.c:248 Unable to connect to PostgreSQL server. Database=bacula User=bacula
Possible causes: SQL server not running; password incorrect; max_connections exceeded.
[root@baclulasrv01 bacula]# bconsole
Connecting to Director localhost:9101
1000 OK: 103 bacula-dir Version: 9.0.6 (20 November 2017)
Enter a period to cancel a command.
*status
Status available for:
1: Director
2: Storage
3: Client
4: Scheduled
5: Network
6: All
Select daemon type for status (1-6): 1
bacula-dir Version: 9.0.6 (20 November 2017) x86_64-redhat-linux-gnu redhat Enterprise 8.0
Daemon started 20-Sep-21 18:10, conf reloaded 20-Sep-2021 18:10:36
Jobs: run=2, running=0 mode=0,0
Heap: heap=135,168 smbytes=87,219 max_bytes=133,175 bufs=294 max_bufs=323
Res: njobs=3 nclients=1 nstores=2 npools=3 ncats=1 nfsets=2 nscheds=2
Scheduled Jobs:
Level Type Pri Scheduled Job Name Volume
===================================================================================
Incremental Backup 10 21-Sep-21 23:05 BackupClient1 Vol-0001
Full Backup 11 21-Sep-21 23:10 BackupCatalog Vol-0001
====
Running Jobs:
Console connected at 21-Sep-21 12:05
No Jobs running.
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
====================================================================
1 Full 650 77.91 M OK 20-Sep-21 23:05 BackupClient1
2 Full 1 123.2 K OK 20-Sep-21 23:10 BackupCatalog
====
You have messages.
===== Bacula client on AIX ======
http://blog.bacula.org/doku.php?id=howto_compile_bacula_client_on_aix
After install gcc and gcc++, I uncompress source and compile
[root@aix71]/root/rpmbuild/SOURCES/bacula-11.0.5# ./configure -prefix=/usr/local/bacula -enable-largefile -disable-libtool -with-pid-dir=/usr/local/bacula/var/run -with-subsys-dir=/usr/local/bacula/va
r/run/subsys --disable-conio --enable-build-stored --enable-client-only
==>Entering directory /root/rpmbuild/SOURCES/bacula-11.0.5/src/console
==>Entering directory /root/rpmbuild/SOURCES/bacula-11.0.5/manpages
==>Entering directory /root/rpmbuild/SOURCES/bacula-11.0.5/platforms
Configuration on Wed Sep 22 14:08:20 CEST 2021:
Host: powerpc-ibm-aix7.1.5.0 -- aix 1
Bacula version: Bacula 11.0.5 (03 June 2021)
Source code location: .
Install binaries: /usr/local/bacula/sbin
Install libraries: /usr/local/bacula/lib
Install config files: /usr/local/bacula/etc
Scripts directory: /usr/local/bacula/etc
Archive directory: /tmp
Working directory: /opt/bacula/working
PID directory: /usr/local/bacula/var/run
Subsys directory: /usr/local/bacula/var/run/subsys
Man directory: /usr/share/man
Data directory: /usr/local/bacula/share
Plugin directory: /usr/local/bacula/lib
C Compiler: gcc 8.3.0
C++ Compiler: /usr/bin/g++ 8.3.0
Compiler flags: -g -O2 -Wall -x c++ -fno-strict-aliasing -fno-exceptions -fno-rtti
Linker flags:
Libraries: -lpthread -lintl
Statically Linked Tools: no
Statically Linked FD: no
Statically Linked SD: no
Statically Linked DIR: no
Statically Linked CONS: no
Database backends: None
Database port:
Database name: bacula
Database user: bacula
Database SSL options:
Job Output Email: root@localhost
Traceback Email: root@localhost
SMTP Host Address: localhost
Director Port: 9101
File daemon Port: 9102
Storage daemon Port: 9103
Director User:
Director Group:
Storage Daemon User:
Storage DaemonGroup:
File Daemon User:
File Daemon Group:
Large file support: no
Bacula conio support: no
readline support: no
TCP Wrappers support: no
TLS support: yes
Encryption support: yes
ZLIB support: yes
LZO support: no
S3 support: no
enable-smartalloc: yes
enable-lockmgr: no
bat support: no
client-only: yes
build-dird: yes
build-stored: yes
Plugin support: no
AFS support: no
ACL support: yes
XATTR support: yes
GPFS support: no
systemd support: no
Batch insert enabled: None
Plugins:
- Docker: no
[root@aix71]/root/rpmbuild/SOURCES/bacula-11.0.5#