====== Brocade initialization steps ======

  * IP config
  * DNS
  * switchname
  * Domain ID
  * Timezone
  * NTP
  * Licenses
<code>
sansw01:FID128:admin> license --show -port
</code>
  * firmware update
  * Virtual fabric
<code>
sansw01:FID128:admin> lscfg --create 10

sansw01:FID128:admin> lscfg --show -instance

sansw01:FID128:admin> lscfg --config 10 -port 0-3
</code>
  * ISL
<code>
sansw01:FID128:admin> portdisable 4
sansw01:FID128:admin> portcfgcompress --enable 4
sansw01:FID128:admin> portcfglongdistance 4 LD 1 -buffers 1000
Warning: port may be buffer limited if cable is longer than estimated.
sansw01:FID128:admin> portenable 4
sansw01:FID128:admin> portbuffershow
</code>