wiki

Test	Test Descriptio	Comments	Result	State
1	Start PowerHA on node1	node1 starts and acquires the RG1 ressource group	OK
2	Start PowerHA on node2	node2 starts and acquires the RG2 ressource group	OK
3	Perform a graceful stop without takeover on node 1 (with RG move)	Ressource Group RG1 goes offline	OK
4	Start PowerHA on node1	node1 starts and acquires the RG1 ressource group	OK
5	Perform a graceful stop with takeover on node 1 (with move RG1)	Ressource Group RG1 moves to node2	OK
6	Start PowerHA on node1	node1 starts and the ressource group RG1 stays on node2	OK
7	bring each ressource on his home node RG1 on node 1 , RG2 on node 2
8	Fail (unplug) the service interface on node1 (rmdev -l en0)	The IP moves to the node2 and Ressource group RG1 also	OK (3min)	node1 stay running without RG
9	Reconnect the service interface on node1		OK	RG1 and RG2 on node2
10	Bring each ressource on his home node
11	On node1 issue “halt -q” to force down the operating system	node1 halt - ressource group RG1 move to node2	OK
12	Reboot node1 and start PowerHA node1 reboot.	After PowerHA starts, the ressource groups stay on node2	OK

Test	Test Descriptio	Comments
1	Bring each ressource on his home node	RG1 on node 1 , RG2 on node 2
2	Remove one path on a mirrored disk RG1 one VIOS	nothing happens, paths errors
3	Remove the second path on a mirrored disk RG1 on the second VIOS	One disk from mirror VG is lost, nothing happens
4	remove the second disk from VG, on each VIOS	RG1 moves to node 2
5	resync VG if needed, remap removed disks on VIOS and move each ressource on his home node