Differences

This shows you the differences between two versions of the page.

--- storage:brocade_adv [2025/04/16 17:25]
manu [ISL settings for DWDM]
+++ storage:brocade_adv [2025/05/02 16:13] (current)
manu [Configuring XISL]
@@ Line 114: / Line 114: @@
 https://techdocs.broadcom.com/us/en/fibre-channel-networking/fabric-os/fabric-os-commands/9-2-x/Fabric-OS-Commands/lfCfg.html
+===== Configuring QOS =====
+Quality Of Service can easily activated per zone
+You can enable high or low priority traffic, based on a priority ID.
+  The id range is from 1 through 5 for high-priority traffic, which corresponds to VCs 10 through 14. For low-priority traffic, the id range is from 1 through 2, which corresponds to VCs 8 and 9. The id is optional; if it is not specified, the virtual channels are allocated through a round-robin scheme.
+Example of High priority zone with ID 2
+  QOSH2_myzone1
+For low priority 1
+  QOSL1_myzone2
+After enabling zone, your ISL have to be configured for QOS:
+<cli prompt='>'>
+sw0:admin> portcfgqos --enable 3
+</cli>
 ===== Configuring Virtual Fabric =====
@@ Line 486: / Line 503: @@
 ==== ISL settings for DWDM ====
-{{storage:isl_dwdm_parameters.png|}}
+{{storage:isl_dwdm_parameters.png?600|}}
 ===== Connect to a switch without password =====

wiki