storage:brocade_gateway
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
storage:brocade_gateway [2021/01/01 21:25] 127.0.0.1 external edit |
storage:brocade_gateway [2024/01/05 18:20] (current) manu |
||
|---|---|---|---|
| Line 45: | Line 45: | ||
| F-Port to N-Port mapping has been updated successfully | F-Port to N-Port mapping has been updated successfully | ||
| </cli> | </cli> | ||
| + | |||
| + | |||
| + | <code> | ||
| + | FLEX-A1-BLUE:admin> switchdisable | ||
| + | FLEX-A1-BLUE:admin> ag --modeenable | ||
| + | WARNING: Access Gateway mode changes the standard behavior of the switch. Please check Access Gateway Administrator's Guide before proceeding. | ||
| + | Enabling agmode will remove all the configuration data on the switch | ||
| + | including zoning configuration, FAWWN configuration and security database. Please backup your | ||
| + | configuration using configupload. | ||
| + | This operation will reboot the switch. | ||
| + | Do you want to continue? (yes, y, no, n): [no] y | ||
| + | The following configurations need to be disabled before enabling the AG mode in the switch: | ||
| + | ERROR: Authentication policies are enabled in the switch. | ||
| + | Please disable the Authentication policies using the authutil --policy -sw(switch)/-dev(device) | ||
| + | |||
| + | FLEX-A1-BLUE:admin> authutil --help | ||
| + | Usage authutil: | ||
| + | --set -a <fcap|dhchap|all> set authentication type. | ||
| + | --set -g <0..4|'*'> set DH group value. | ||
| + | --set -h <sha256|sha1|md5|sha1,md5|all> set HASH type. | ||
| + | --show show authentication configuration value. | ||
| + | --policy -sw <off|passive|active|on> set switch authentication policy. | ||
| + | --policy -dev <off|passive|on> set device authentication policy. | ||
| + | --authinit <[<SlotNumber>/]<PortNumber>,...|allE>initiates the authentication on specified ports or all E-ports | ||
| + | |||
| + | FLEX-A1-BLUE:admin> authutil --show | ||
| + | AUTH TYPE HASH TYPE GROUP TYPE | ||
| + | -------------------------------------- | ||
| + | fcap,dhchap sha256,sha1,md5 0,1,2,3,4 | ||
| + | |||
| + | Switch Authentication Policy: PASSIVE | ||
| + | Device Authentication Policy: OFF | ||
| + | FLEX-A1-BLUE:admin> authutil --policy -sw off | ||
| + | Warning: Activating the authentication policy requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Otherwise, ISLs will be segmented during next E-port bring-up. | ||
| + | ARE YOU SURE (yes, y, no, n): [no] y | ||
| + | Auth Policy is set to OFF | ||
| + | |||
| + | FLEX-A1-BLUE:admin> ag --modeenable | ||
| + | WARNING: Access Gateway mode changes the standard behavior of the switch. Please check Access Gateway Administrator's Guide before proceeding. | ||
| + | Enabling agmode will remove all the configuration data on the switch | ||
| + | including zoning configuration, FAWWN configuration and security database. Please backup your | ||
| + | configuration using configupload. | ||
| + | This operation will reboot the switch. | ||
| + | Do you want to continue? (yes, y, no, n): [no] yes | ||
| + | |||
| + | |||
| + | After reboot: | ||
| + | |||
| + | |||
| + | |||
| + | FLEX-A1-BLUE:admin> switchshow | ||
| + | switchName: FLEX-A1-BLUE | ||
| + | switchState: Online | ||
| + | switchMode: Access Gateway Mode | ||
| + | |||
| + | |||
| + | Index Port Address Media Speed State Proto | ||
| + | ================================================== | ||
| + | 0 0 790000 id N16 Online FC N-Port 10:00:d8:1f:cc:xx:xx:xx 0x6f0c00 (AoQ) | ||
| + | 1 1 790100 cu N16 Online FC F-Port 10:00:00:90:fa:xx:xx:xx 0x6f0c01 | ||
| + | 13 13 790d00 cu N16 Online FC F-Port 10:00:00:90:fa:xx:xx:xx 0x6f0d04 | ||
| + | 14 14 790e00 cu N16 Online FC F-Port 10:00:00:90:fa:xx:xx:xx 0x6f0c09 | ||
| + | 29 29 791d00 id N16 Online FC N-Port 10:00:d8:1f:cc:xx:xx:xx 0x6f0d00 (AoQ) | ||
| + | </code> | ||
| + | |||
| + | <cli prompt='>'> | ||
| + | FLEX-A1-BLUE:admin> ag --modeshow | ||
| + | Access Gateway mode is enabled. | ||
| + | FLEX-A1-BLUE:admin> fabricshow | ||
| + | Error: This command is not supported in AG mode | ||
| + | FLEX-A1-BLUE:admin> | ||
| + | |||
| + | FLEX-A1-BLUE:admin> ag --mapshow | ||
| + | N_Port Configured_F_Ports Static_F_Ports Current_F_Ports Failover Failback PG_ID PG_Name | ||
| + | ------------------------------------------------------------------------------------------------ | ||
| + | 0 1;21 None 1;3;4;5;6; 1 1 0 pg0 | ||
| + | 7;8;10;12;14 | ||
| + | 29 2;22 None 2;9;11;13 1 1 0 pg0 | ||
| + | 30 3;23 None None 1 1 0 pg0 | ||
| + | 31 4;24 None None 1 1 0 pg0 | ||
| + | 32 5;25 None None 1 1 0 pg0 | ||
| + | 33 6;26 None None 1 1 0 pg0 | ||
| + | 34 7;27 None None 1 1 0 pg0 | ||
| + | 35 8;28 None None 1 1 0 pg0 | ||
| + | 36 9 None None 1 1 0 pg0 | ||
| + | 37 10 None None 1 1 0 pg0 | ||
| + | 38 11 None None 1 1 0 pg0 | ||
| + | 39 12 None None 1 1 0 pg0 | ||
| + | 40 13 None None 1 1 0 pg0 | ||
| + | 41 14 None None 1 1 0 pg0 | ||
| + | 42 15 None None 1 1 0 pg0 | ||
| + | 43 16 None None 1 1 0 pg0 | ||
| + | 44 17 None None 1 1 0 pg0 | ||
| + | 45 18 None None 1 1 0 pg0 | ||
| + | 46 19 None None 1 1 0 pg0 | ||
| + | 47 20 None None 1 1 0 pg0 | ||
| + | ------------------------------------------------------------------------------------------------ | ||
| + | |||
| + | |||
| + | FLEX-A1-BLUE:admin> ag --mapdel 40 13 | ||
| + | F_Port to N_Port mapping has been updated successfully | ||
| + | FLEX-A1-BLUE:admin> ag --mapdel 39 12 | ||
| + | FLEX-A1-BLUE:admin> ag --mapadd 0 "3;4;5;6;7" | ||
| + | F_Port to N_Port mapping has been updated successfully | ||
| + | |||
| + | |||
| + | FLEX-A1-BLUE:admin> ag --mapshow | ||
| + | N_Port Configured_F_Ports Static_F_Ports Current_F_Ports Failover Failback PG_ID PG_Name | ||
| + | ------------------------------------------------------------------------------------------------ | ||
| + | 0 1;2;3;4;5; None 1;2;3;4;5; 1 1 0 pg0 | ||
| + | 6;7 6;7 | ||
| + | 29 8;9;10;11;12; None 8;9;10;11;12; 1 1 0 pg0 | ||
| + | 13;14 13;14 | ||
| + | |||
| + | |||
| + | |||
| + | sanb01:FID128:admin> switchshow | ||
| + | switchName: sanb01 | ||
| + | .... | ||
| + | 12 12 6f0c00 id N16 Online FC F-Port 1 N Port + 7 NPIV public (AoQ) | ||
| + | 13 13 6f0d00 id N16 Online FC F-Port 1 N Port + 7 NPIV public (AoQ) | ||
| + | </cli> | ||
| + | |||
storage/brocade_gateway.1609532719.txt.gz · Last modified: 2021/01/01 21:25 by 127.0.0.1
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
