Differences

This shows you the differences between two versions of the page.

--- storage:svc_scripts [2024/11/13 00:25]
manu
+++ storage:svc_scripts [2025/02/28 14:36] (current)
manu
@@ Line 3: / Line 3: @@
 ===== Monitoring SVC nagios =====
-==== Check quorum ====
+==== Check paths ====
+<cli prompt='#'>
+[root@aix001]/usr/local/nagios/libexec# cat check_paths.sh
+</cli>
+<code>
+#!/bin/sh
+#@(#) v1.0 Count number of paths per disk
+# v1.1 add sudo linux
+# v1.2 change for VSCSI
+# v1.3 add verbose (-v), improvements linux
-==== Check paths ====
+# number of path per type of disk
+pathviosfc=4
+pathviosscsi=2
+pathviossas=1
+pathlparfc=8
+pathlparscsi=2
+pathlparsas=1
-==== Check v7000/SVC ====
+STATUS=0
-https://exchange.nagios.org/directory/Plugins/Hardware/Storage-Systems/SAN-and-NAS/IBM-San-Volume-Controller/IBM-StorWize-V3700--2F-V7000-check/details
+STATE_OK=0
+STATE_WARNING=1
+STATE_CRITICAL=2
+STATE_UNKNOWN=3
-<code>
+MSG=""
-[root@nagios plugins]# cat check_ibm_storwize.pl
+verbose=""
-#!/usr/bin/perl
-#
-# check_ibm_v7000_svc Nagios check
-# you need to configure a ssh key without passphrase for logins to your V7000 storage array.
-# IBM SVC.pm Perl Module is required and available here:
-# https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=AW-0NK
-# http://www.alphaworks.ibm.com/tech/svctools
-#
-# Martin Leucht <mleucht@ipb.de> 09.01.2013
-# Version 1.1
-#
-# fixed version 1.2 03.04.2014
-#
-# Usage: check_ibm_v7000_svc.pl -cluster=[IP or hostname] -check=[check] [ -exclude=[listofitems] ]
-#
-# this script can check the following things of your IBM V7000 SVC
-#
-# lsarray -> state of array MDisks
-# lshost -> state of attached hosts
-# lsdrive -> state of drives
-# lsmdiskgrp -> state of svc managed disk groups
-# lsmdisk -> state of external managed disks
-# lunonline / lsvdisk -> state of volumes (lun's/vdisk's)
-# lsenclosure -> state of enclosures
-# lsenclosurebattery -> state of batteries
-# lsnodebattery -> for SVC
-# lsenclosurecanister -> state of canister/nodes
-# lsnode -> for SVC
-# lsenclosurepsu -> state of psu's
-# lsenclosureslot -> state of port enclosure slots
-# luninsync / lsrcrelationship -> state of syncs of your volumes (if you have more than one machine and mirroring)
-# lsenclosureslotx -> state of enclosure slot port
-#
-# TODO: ISCSI port check (BUG in Perl module - lsportip state is not provided via IBM::SVC)
-#
-#   example nagios command definition
-#
-# define command {
-#    command_name    check_ibm_v7000_svc
-#    command_line    $USER1$/check_ibm_v7000_svc.pl -cluster=$HOSTADDRESS$ -check=$ARG1$ -v
-# }
-#
-#   example command excluding some items
-#
-# define command {
-#    command_name    check_ibm_v7000_svc_exclude
-#    command_line    $USER1$/check_ibm_v7000_svc.pl -cluster=$HOSTADDRESS$ -check=$ARG1$ -exclude=$ARG2$ -v
-# }
-#
-#   ... and service definition
-#
-# define service {
-#    use                             severity2,noperf
-#    service_description             check_lunsonline
-#    host_name                       storwize01,storwize02
-#    check_command                   check_ibm_v7000_svc!lunonline!'lun1,lun2'
-# }
-use strict;
+# specified value for nb paths
-use IBM::SVC1;
+if [ "$npath" == "" ]
-use Getopt::Long;
+then
-#use Data::Dumper;
+  nbpath=$pathlparfc
+fi
-my ($cluster, $ssh, $verbose, $user, $check, $help, $exclude);
+os=$(uname -a | awk '{print $1}')
-$ssh="ssh";
-$user="nagios";
-my $state="";
-my $message="";
-my $params={};
-my $svc_command="";
-my $item="";
-my $item_name="";
-my $item_state="";
-my $msg="";
-my @exclude="";
-my $x=0;
-my %excl=();
-GetOptions (
+grepp() { [ $# -eq 1 ] && perl -00ne "print if /$1/i" || perl -00ne "print if /$1/i" < "$2";}
-        "cluster=s"      => \$cluster,
-        "verbose|v"      => \$verbose,
+#---------------------
-        "ssh=s"          => \$ssh,
+count_linux_path()
-        "check=s"            => \$check,
+{
-        "help|h"             => \$help,
+tempfile=/tmp/multipath.txt
-        "exclude=s"          => \$exclude,
-        "user=s"             => \$user
+if [ ! -x /usr/sbin/multipath ] || [ $(lsscsi -s | grep -q VMware; echo $?) -eq 0 ]
-);
+then
+  MSG="OK: no multipathing"
+  verbose="$MSG"
+  STATUS=$STATE_OK
+else
+  if [ $(timeout 30  sudo /usr/sbin/multipath -ll | grep -v "policy=" | grep -v "size=" | tr -s ' ' | sed 's/\ /;/g' | sed '/^mpath/i \\n' > $tempfile ; echo $?) -ne "0" ]
+  then
+    MSG="$MSG Maybe error on sudo config"
+    verbose="$MSG"
+    STATUS=$STATE_UNKNOWN
+  else
+    for i in $(cat $tempfile | grep '^mpath' | awk -F';' '{print $1}')
+    do
+      pathok=$(cat $tempfile | grepp "^$i;" | grep -v "policy=" | grep -v "size=" | grep -v '^mpath' | grep active | wc -l | awk '{print $1}')
+      pathok_pct=$(echo "scale=1;100*$pathok/$nbpath" | bc | cut -d '.' -f1)
+      verbose="$verbose $i;$pathok/$nbpath" # verbose message
+      if [ "$pathok_pct" -lt "50" ]
+      then
+        MSG="$MSG $i;$pathok/$nbpath"
+        if [ $STATUS -lt $STATE_CRITICAL ]
+        then
+          STATUS=$STATE_CRITICAL
+        fi
+      else
+        if [ "$pathok_pct" -ne "100" ]
+        then
+          MSG="$MSG $i;$pathok/$nbpath"
+          if [ $STATUS -lt $STATE_CRITICAL ]
+          then
+            STATUS=$STATE_WARNING
+          fi
+        fi
+      fi
+    done
+  fi
+fi
-if ( !$cluster || !$check || $help) {
+rm -f $tempfile 2>/dev/null
-    print_usage();
-    exit(0);
 }
-# Nagios exit states
-our %states = (
-        OK       => 0,
-        WARNING  => 1,
-        CRITICAL => 2,
-        UNKNOWN  => 3
-);
-# Nagios state names
-our %state_names = (
-=> 'OK',
-=> 'WARNING',
-=> 'CRITICAL',
-=> 'UNKNOWN'
-);
-# get excluded items
-if ($exclude ne "") {
-        if ($check eq "lunonline" || $check eq "luninsync" || $check eq "lshost") {
-                @exclude = split(",",$exclude);
-        foreach (@exclude) {
-                        $x++;
-            $excl{$_} = $x;
-                }
-        } else {
-                print "excluding is only available for lunonline, luninsync and lshost check!\n";
-                exit(0);
-        }
+#---------------------
+count_aix_path()
+{
+# check not available disks
+nbdisknok=$(lsdev -Cc disk | grep -v Available | wc -l | awk '{print $1}')
+if [ "$nbdisknok" -ne "0" ]
+then
+  MSG="$MSG WARNING: $nbdisknok disks defined"
+  verbose="$MSG"
+  STATUS=$STATE_WARNING
+else
+  STATUS=$STATE_OK
+fi
+for line in $(lsdev -Cc disk | tr -s ' ' | sed 's/\ /:/' | sed 's/\ /:/' | sed 's/\ /,/g')
+do
+  hdisk=$(echo $line | awk -F':' '{print $1}')
+  if [ "$(echo $line | cut -d':' -f3- | tr 'A-Z' 'a-z' | grep -q mpio; echo $?)" -eq "0" ]
+  then
+    if [ ! -e /usr/ios/cli/ioscli ]
+        then
+          # type LPAR FC
+          nbpath=$pathlparfc
+    else
+          # type VIOS FC
+          nbpath=$pathviosfc
+    fi
+  else
+    if [ "$(echo $line | cut -d':' -f3- | tr 'A-Z' 'a-z' | grep -q scsi; echo $?)" -eq "0" ]
+    then
+      if [ ! -e /usr/ios/cli/ioscli ]
+          then
+            # type LPAR SCSI
+            nbpath=$pathlparscsi
+      else
+            # type VIOS SCSI
+            nbpath=$pathviosscsi
+      fi
+    else
+      if [ "$(echo $line | cut -d':' -f3- | tr 'A-Z' 'a-z' | grep -q sas; echo $?)" -eq "0" ]
+      then
+        if [ ! -e /usr/ios/cli/ioscli ]
+            then
+              # type LPAR SAS
+              nbpath=$pathlparsas
+        else
+              # type VIOS SAS
+              nbpath=$pathviossas
+        fi
+          fi
+        fi
+  fi
+  pathok=$(lspath -l $hdisk | grep Enabled | wc -l | awk '{print $1}')
+  pathok_pct=$(echo "scale=1;100*$pathok/$nbpath" | bc | cut -d '.' -f1)
+  verbose="$verbose $hdisk;$pathok/$nbpath"
+  if [ "$pathok_pct" -lt "50" ]
+  then
+    MSG="$MSG $hdisk;$pathok/$nbpath"
+    if [ $STATUS -lt $STATE_CRITICAL ]
+    then
+      STATUS=$STATE_CRITICAL
+    fi
+  else
+    if [ "$pathok_pct" -ne "100" ]
+    then
+      MSG="$MSG $hdisk;$pathok/$nbpath"
+      if [ $STATUS -lt $STATE_CRITICAL ]
+      then
+        STATUS=$STATE_WARNING
+      fi
+    fi
+  fi
+done
 }
-# return states SVC/V7000 (see on console by typing svc_command -h
-# generic_states for lunonline, lsenclosure,lsmdiskgrp,lsmdisk
-# lsenclosurecanister, lsenclosurepsu, lsenclosureslot checks
-my %generic_states = (
+######################
-                                'online'                        =>      'OK',
+if [ "$os" = "Linux" ]
-                                'offline'                       =>      'CRITICAL',
+then
-                                'degraded'                      =>      'CRITICAL', );
+  count_linux_path
-my %luninsync_states = (
+else
-                                'consistent_synchronized'       =>      'OK',
+  if [ "$os" = "AIX" ]
-                                'consistent_copying'            =>      'OK',
+  then
-                                'inconsistent_stopped'          =>      'CRITICAL',
+    count_aix_path
-                                'consistent_stopped'            =>      'WARNING',
+  else
-                                'idling'                        =>      'WARNING',
+    echo "########## Unknown OS"
-                                'consistent_disconnected'       =>      'CRITICAL',
+        STATUS=$STATE_UNKNOWN
-                                'inconsistent_copying'          =>      'CRITICAL',
+  fi
-                                'idling_disconnected'           =>      'CRITICAL',
+fi
-                                'inconsistent_disconnected'     =>      'CRITICAL',     );
-my %lsdrive_states = (
-                                'online'                        =>      'OK',
-                                'offline'                       =>      'CRITICAL',
-                                'degraded'                      =>      'CRITICAL', );
-my %lsmdisk_states = (
-                                'offline'                       =>      'CRITICAL',
-                                'degraded'                      =>      'CRITICAL',
-                                'syncing'                       =>      'WARNING',
-                                'initting'                      =>      'OK',
-                                'online'                        =>      'OK', );
-my %lsiogrp_states = (
-                                '2'                             =>      'OK',
-                                '1'                             =>      'CRITICAL',);
-my %lsenclosureslot_states = (
+if [ $STATUS -eq $STATE_OK ]
-                                'online'                        =>      'OK',
+then
-                                'excluded_by_drive'             =>      'WARNING',
+  echo "OK"
-                                'excluded_by_enclosure'         =>      'WARNING',
+else
-                                'excluded_by_system'            =>      'WARNING',);
+  echo "$MSG"
-my %lshost_states = (
+fi
-                                'online'                        =>      'OK',
-                                'offline'                       =>      'CRITICAL',
-                                'degraded'                      =>      'WARNING', );
-# do not edit anything below this
-sub print_usage {
+# For debug
-        print <<EOU;
+if [ "$1" = "-v" ]
+then
+  echo "$verbose" | tr ' ' '\n'
+fi
-    Usage: $0 -cluster=[IP or hostname] -check=[check] -v
+exit $STATUS
+</code>
-    -cluster            Hostname or IP address of V7000 SVC (*required*)
+==== Check quorum ====
-    -check              Checktype (*required*)
-                        Possible values are:
-                        * lunonline|luninsync
-                        * lsmdisk|lsdrive|lsenclosure|lsenclosurebattery
-                        * lsenclosurecanister|lsenclosurepsu|lsenclosureslotx
-                        ( lsenclosureslotx = lsenclosureslot1 ... lsenclosureslotx )
-    -user                       Username which is configured on your v7000 (default nagios)
+<cli prompt='#'>
-    -ssh                        ssh method - the ssh command to use. Possible values are:
+[root@nagios plugins]# cat check_ibm_storwize_quorum.sh
-                        * "ssh" (default)
+</cli>
-                        * "plink" (PUTTY)
+<code>
-    -exclude                comma separated list of excluded vdisknames (lunonline check)
+#!/bin/sh
-                        or consistency group names (luninsync check)
+#set -x
-    -h -help                Print this help
+##################################################
-    -v -verbose         verbose output (OK items are listed)
+#@(#) check SVC IP quorum
+##################################################
+# version: 1.0 02-2022 Manu
+##################################################
-EOU
+STATUS=0
-        exit (0);
-}
-# Set parameters for svc connection
+STATE_OK=0
-$params->{'cluster_name'} = $cluster if $cluster;
+STATE_WARNING=1
-$params->{'user'} = $user if $user;
+STATE_CRITICAL=2
-$params->{'ssh_method'} = $ssh if $ssh;
+STATE_UNKNOWN=3
-#$params->{'keyfile'} = $keyfile if $keyfile;
-# Create the connection with the parameters set above.
+cluster=$(echo $1 | sed 's/\-cluster=//')
-my $svc = IBM::SVC->new($params);
+user="nagios"
-if ($check eq "lunonline") {
+quorumsrv="witness01.ad.com"
-        $svc_command = "lsvdisk";
-        $item = "vdisks (luns)";
-        $item_name = "name";
-        $item_state = "status";
-        &itemcheck(\%generic_states,\%excl)
-} elsif ($check eq "luninsync") {
+output=$(ssh $user@$cluster 'lsquorum -delim :')
-    # * consistent_synchronized
-    # * consistent_copying
-    # * inconsistent_stopped
-    # * consistent_stopped
-    # * idling
-    # * consistent_disconnected'
-    # * inconsistent_copying
-    # * idling_disconnected
-    # * inconsistent_disconnected
-        $svc_command = "lsrcrelationship";
-        $item = "consistency groups";
-        $item_name = "consistency_group_name";
-        $item_state = "state";
-        &itemcheck(\%luninsync_states,\%excl)
-} elsif ($check eq "lsmdisk") {
+STATUS=0
-    # * offline - the array is offline on all nodes
+MSG=""
-    # * degraded - the array has deconfigured or offline members; the array is not fully redundant
+if [[ $(echo $output | tr ' ' '\n' | grep ':online:' | grep ':device:' | grep ":${quorumsrv}" | wc -l | awk '{print $1}') -ge "1" ]]
-    # * syncing - array members are all online, the array is syncing parity or mirrors to achieve redundancy
+then
-    # * initting - array members are all online, the array is initializing; the array is fully  redundant
+  (( STATUS = STATUS + 0 ))
-    # * online - array members are all online, and the array is fully redundant
+  MSG="IP quorum: $quorumsrv OK"
-        $svc_command = "lsmdisk";
+else
-        $item = "mdisk";
+  (( STATUS = STATUS + 1 ))
-        $item_name = "name";
+  MSG="IP quorum: $quorumsrv down!!!"
-        $item_state = "status";
+fi
-        &itemcheck(\%lsmdisk_states)
-} elsif ($check eq "lsiogrp") {
+if [[ $(echo $output | tr ' ' '\n' | grep ':online:' | grep -v ':device:' | wc -l | awk '{print $1}') -ge "2" ]]
-    # * 2 - the array is operating normally
+then
-    # * 1 - the array has deconfigured or offline nodes; the array is not fully redundant
+  (( STATUS = STATUS + 0 ))
-        $svc_command = "lsiogrp";
+  MSG=$(echo "$MSG | nb quorum OK")
-        $item = "iogrp";
+else
-        $item_name = "name";
+  (( STATUS = STATUS + 1 ))
-        $item_state = "node_count";
+  MSG=$(echo "$MSG | bad number of quorum !!")
-        &itemcheck(\%lsiogrp_states)
+fi
-} elsif ($check eq "lshost") {
+echo $MSG
-    # * 2 - the array is operating normally
+exit $STATUS
-    # * 1 - the array has deconfigured or offline nodes; the array is not fully redundant
+</code>
-        $svc_command = "lshost";
-        $item = "host";
-        $item_name = "name";
-        $item_state = "status";
-        &itemcheck(\%lshost_states,\%excl)
-} elsif ($check eq "lsmdiskgrp") {
+==== Check paths ====
-    # * offline - the array is offline on all nodes
-    # * degraded - the array has deconfigured or offline members; the array is not fully redundant
-    # * syncing - array members are all online, the array is syncing parity or mirrors to achieve redundancy
-    # * initting - array members are all online, the array is initializing; the array is fully  redundant
-    # * online - array members are all online, and the array is fully redundant
-        $svc_command = "lsmdiskgrp";
-        $item = "mdiskgrp";
-        $item_name = "name";
-        $item_state = "status";
-        &itemcheck(\%generic_states)
-} elsif ($check eq "lsdrive") {
+<cli prompt='#'>
-    # * online: blank
+[root@lnxb080 plugins]# cat check_storage_host_paths.sh
-    # * degraded: populated if associated with an error
+</cli>
-    # * offline: must be populated
+<code>
-        $svc_command = "lsdrive";
+#!/bin/sh
-        $item = "mdisk member";
+#set -x
-        $item_name = "id";
+##################################################
-        #$item_state = "error_sequence_number";
+#@(#) check host paths on SVC
-        $item_state = "status";
+##################################################
-        &itemcheck(\%lsdrive_states)
+# version: 1.0 02-2022 Manu
+##################################################
-} elsif ($check eq "lsenclosure") {
+STATUS=0
-    # Indicates if an enclosure is visible to the SAS network:
-        $svc_command = "lsenclosure";
-        $item = "enclosure(s)";
-        $item_name = "id";
-        $item_state = "status";
-        &itemcheck(\%generic_states)
-} elsif ($check eq "lsenclosurebattery") {
+STATE_OK=0
-    # The status of the battery:
+STATE_WARNING=1
-        $svc_command = "lsenclosurebattery";
+STATE_CRITICAL=2
-        $item = "enclosurebatteries";
+STATE_UNKNOWN=3
-        $item_name = "battery_id";
-        $item_state = "status";
-        &itemcheck(\%generic_states)
-} elsif ($check eq "lsnodebattery") {
+cluster=$(echo $1 | sed 's/\-cluster=//')
-    # The status of the battery:
+user="nagios"
-        $svc_command = "lsnodebattery";
+SSH="ssh -o ConnectTimeout=30 ${user}@"
-        $item = "enclosurebatteries";
+list="svc01"
-        $item_name = "battery_id";
-        $item_state = "status";
-        &itemcheck(\%generic_states)
-} elsif ($check eq "lsenclosurecanister") {
+MSG=""
-    # The status of the canister:
+exclude=':none:'
-        $svc_command = "lsenclosurecanister";
-        $item = "enclosurecanister(s)";
-        $item_name = "node_name";
-        $item_state = "status";
-        &itemcheck(\%generic_states)
-} elsif ($check eq "lsnode") {
+word="$1"
-    # The status of the canister:
+case "$word" in
-        $svc_command = "lsnode";
+    "esx" ) count=2
-        $item = "enclosurecanister(s)";
+            exclude=':none:' ;;
-        $item_name = "name";
+    "aix" ) count=4
-        $item_state = "status";
+            exclude="aixv" ;;
-        &itemcheck(\%generic_states)
+    "lnx" ) count=4
+            exclude=':none:' ;;
+    "vio" ) count=2
+            word=aixv
+            exclude=':none:' ;;
+    "win" ) count=2
+            word='win|mssql'
+            exclude=':none:' ;;
+  "other" ) count=4
+            word='svc01'
+            exclude='esx|aix|lnx|win|mssql' ;;
+      "*" ) MSG="wrong parameter" ;;
+esac
-} elsif ($check eq "lsenclosurepsu") {
-    # The status of the psu(s)
-        $svc_command = "lsenclosurepsu";
-        $item = "enclosurepsu(s)";
-        $item_name = "PSU_id";
-        $item_state = "status";
-        &itemcheck(\%generic_states)
-} elsif ($check =~ m/^lsenclosureslot(\d+)$/ ) {
-    # The status of enclosure slot port x. If the port is bypassed for multiple reasons, only one is shown.
-    # In order of priority, they are:
-    # * online: enclosure slot port x is online
-    # * excluded_by_drive: the drive excluded the port
-    # * excluded_by_enclosure: the enclosure excluded the port
-    # * excluded_by_system: the clustered system (system) has excluded the port
-        $svc_command = "lsenclosureslot";
+for storage in $(echo ${list})
-        $item = "enclosureslots port" . $1;
+do
-        $item_name = "slot_id";
+  cmd='lshost -delim : -nohdr'
-        $item_state = "port_" . $1 . "_status";
+  for node in $(${SSH}${storage} $cmd | cut -d':' -f2)
-        &itemcheck(\%lsenclosureslot_states)
+  do
+    cmd="lshost -delim : $node"
+    MSG1=$(echo "$storage:$node:$(${SSH}${storage} $cmd | grep -c "state:active")" | grep -v ':0$' | egrep -i "${word}" | grep -v ":${count}$" | egrep -vi "${exclude}")
+    if [ "$MSG1" != "" ]
+    then
+      MSG=$(echo "${MSG};${MSG1}")
+    fi
+  done
+done
-} else {
+if [ "$MSG" == "" ]
-        $state = 'UNKNOWN';
+then
-        $message = "the check you provided does not exist";
+  RC=0
-}
+else
-# main check subroutine
+  RC=2
-sub itemcheck {
+  echo $MSG
-        # get hash reference(s) from subroutine call
+fi
-        my $v7000_states=shift;
-        my $excluded=shift;
-        my @critical_items = "";
+exit $RC
-        my @warn_items = "";
+</code>
-        my @ok_items = "";
-        my @all_items = "";
-        my $criticalcount =  0;
-    my $warncount =  0;
-    my $okcount =  0;
-    my ($items_desc, $item_desc, $final_item_state);
-    # query storage cluster
+==== Check v7000/SVC ====
-    my ($rc,$all_items_ref) =  $svc->svcinfo($svc_command,{});
-        if ($rc == 0) {
+https://exchange.nagios.org/directory/Plugins/Hardware/Storage-Systems/SAN-and-NAS/IBM-San-Volume-Controller/IBM-StorWize-V3700--2F-V7000-check/details
-                @all_items = @$all_items_ref;
-                if (scalar(@all_items) == 0) {
-                        $state = 'WARNING';
-                        $message = "Could not find any entry for $item";
-                } else {
-                        foreach my $items_params (@all_items) {
-                $item_desc = "$items_params->{$item_name}";
-                chomp($item_desc);
-                                #print Dumper($items_params);
-                                # ommit excluded and blank items
-                next if $excluded->{$item_desc} || $item_desc =~ m/^s*$/g;
-                                $final_item_state = "$items_params->{$item_state}";
-                                if ($v7000_states->{$final_item_state} eq 'OK' ) {
-                                        $okcount++;
-                                        push (@ok_items, $item_desc);
-                                } elsif ($v7000_states->{$final_item_state} eq 'WARNING' ) {
-                                        $warncount++;
-                                        $msg = "$item_desc ($final_item_state) ";
-                    push (@warn_items, $msg);
-                                } elsif ($v7000_states->{$final_item_state} eq 'CRITICAL' ) {
-                                        $criticalcount++;
-                                        $msg = "$item_desc ($final_item_state) ";
-                                        push (@critical_items, $msg);
-                                }
+<cli prompt='#'>
+[root@centreon01 plugins]# cat check_ibm_v7000.sh
+</cli>
+<code>
+#!/usr/bin/bash
+#set -x
+#############################################
+#@(#) Nagios-Centreon check for IBM storage
+#############################################
+# version 1.0 01-2025
-                        }
+ssh='/usr/bin/ssh -q'
-                }
+exitCode=1
-        } else {
-                print "Cannot connect to cluster $cluster\n";
-                exit $states{'CRITICAL'};
-        }
-        if ( $warncount == 0 && $criticalcount == 0 && $okcount > 0 ) {
+while getopts 'M:U:Q:d:h' OPT; do
-                $state = 'OK';
+  case $OPT in
-                if ($verbose) {
+    M)  storage=$OPTARG  ;;
-                        $message = "$state: all $item $final_item_state [" . join(" ",@ok_items) . " ]";
+    U)  user=$OPTARG     ;;
-                } else {
+    Q)  query=$OPTARG    ;;
-                        $message = "$state: all $item $final_item_state";
+    h)  help="yes"        ;;
-                }
+    *)  unknown="yes"    ;;
-        } elsif ( $warncount > 0 && $criticalcount == 0  ) {
+  esac
-                $state = 'WARNING';
+done
-        $message = "$state:" .  join(" ",@warn_items) ;
-        } elsif ( ( $warncount > 0 && $criticalcount > 0 ) || ( $warncount == 0 && $criticalcount > 0 )  ) {
+#storage="psnsvccl01"
-                $state = 'CRITICAL';
+#user=centreon
-                $message = "$state:" .  join(" ",@critical_items) . " " . join(" ",@warn_items) ;
+outputMess=""
-        } else {
-                $state = 'UNKNOWN';
+# usage
-                $message = "$state: Could not find status information or items" ;
+HELP="
-        }
+    Check IBM Storwize v7000 throght ssh (GPL licence)
-}
+    usage: $0 [ -M value -U value -Q command -h ]
+    syntax:
+            -M --> IP Address
+            -U --> user
+            -Q --> query to storage
+                lsdrive
+                lsarray
+                lsmdisk
+                lsmdiskgrp
+                lsvdisk
+                lsenclosure
+                lsenclosurecanister
+                lsenclosurepsu
+                lsenclosurebattery
+                lsnode --> SVC only
+                lsnodebattery --> SVC only
+            -h --> Print This Help Screen
+    Note :
+    This check use ssh protocoll.
+"
+if [ "$hlp" = "yes" -o $# -lt 1 ]; then
+        echo "$HELP"
+        exit 0
+fi
+case $query in
+  lsdrive)
+                word_online=':online:'
+                num=1
+                device='Drives'
+                ;;
+  lsarray)
+                word_online=':online:'
+                num=2
+                device='Array'
+                ;;
+  lsmdisk)
+                word_online=':online:'
+                num=2
+                device='Mdisks'
+                ;;
+  lsmdiskgrp)
+                word_online=':online:'
+                num=2
+                device='Pools'
+                ;;
+  lsvdisk)
+                word_online=':online:'
+                num=2
+                device='Volumes'
+                ;;
+  lsenclosure)
+                word_online=':online:'
+                num=1
+                device='Enclosures'
+                ;;
+  lsenclosurecanister)
+                word_online=':online:'
+                num=2
+                device='Nodes'
+                ;;
+  lsenclosurepsu)
+                word_online=':online:'
+                num=2
+                device='PowerSupply'
+                ;;
+  lsenclosurebattery)
+                word_online=':online:'
+                num=2
+                device='Battery'
+                ;;
+  lsnode)
+                word_online=':online:'
+                num=2
+                device='Nodes'
+                ;;
+  lsnodebattery)
+                word_online=':online:'
+                num=2
+                device='Battery'
+                ;;
+  *)
+                echo -ne "Command not found. \n"
+                exitCode=3
+                exit $exitCode
+                ;;
+esac
+output=$($ssh $user@$storage $query -delim : 2>/dev/null)
+if [ "$output" == "" ]
+then
+  outputMess="$outputMess UNKNOWN: Improper command"
+  exitCode=3
+else
+  nbline=$(echo $output | tr ' ' '\n' | sed '1d' | grep -cv "${word_online}")
+  if [ "$nbline" -ne "0" ]
+  then
+    value=$(echo $output | tr ' ' '\n' | sed '1d' | grep -v "${word_online}" | cut -d':' -f$num | tr '\n' ';' | sed 's/;$//')
+    outputMess="$outputMess CRITICAL: $device OFFLINE $value \n"
+    exitCode=2
+  else
+    value=$(echo $output | tr ' ' '\n' | sed '1d' | grep "${word_online}" | cut -d':' -f$num | tr '\n' ';' | sed 's/;$//')
+    outputMess="$outputMess OK: $device $value \n"
+    exitCode=0
+  fi
+fi
-print $message."\n";
+echo -ne "$outputMess\n"
-exit $states{$state};
+exit $exitCode
 </code>
@@ Line 731: / Line 777: @@
 </code>
+==== template ====
+**check_ibm_v7000.sh**
+<code>
+#!/bin/bash
+# Author:	Lazzarin Alberto
+# Date:		10-04-2013
+# Version	1.4
+#
+# This plugin check the HW status of IBM Storwize v7000.
+# To use this script you need to create a linux user with his ssh certificate.
+# Create the same user on the v7000, member of monitor group and upload the public ssh key.
+# Try to log from linux machine to the v7000 without password, if it function you can use the plugin.
+# I use the 'nagios' user to check the remote system.
+# The help is included into the script.
+#
+#
+#
+# CHANGELOG
+#
+# 1.4 Made by Andrea Tedesco [andrea85 . tedesco @ gmail . com]
+# Add check of v7000 Unified
+# 1.3 Made by Ivan Bergantin [ivan . bergantin @ gmail . com] suggested by Leandro Freitas [leandro @ nodeps . com . br]
+# Add short output in "Service Status Details For Host" view, and detailed output in "Service Information"view
+#
+# 1.2 Made by Feilong
+# Add check of mirror status between two volumes on two IBM V7000.
+# It check the number of mirrors, the numbers of consitent and synchronized mirrors. If they are differents, the status returned is critical.
+#
+# 1.1
+# Change login method from from 'plink' to ssh.
+# Add "OK" and "ATTENTION" in the output.
+#
+# 1.0
+# First release.
+#
+ssh=/usr/bin/ssh
+exitCode=0
+while getopts 'M:U:Q:d:h' OPT; do
+  case $OPT in
+    M)  storage=$OPTARG;;
+    U)  user=$OPTARG;;
+    Q)  query=$OPTARG;;
+    h)  hlp="yes";;
+    *)  unknown="yes";;
+  esac
+done
+# usage
+HELP="
+    Check IBM Storwize v7000 throght ssh (GPL licence)
+    usage: $0 [ -M value -U value -Q command -h ]
+    syntax:
+            -M --> IP Address
+            -U --> user
+            -Q --> query to storage
+		lsarray
+		lsdrive
+		lsvdisk
+		lsenclosure
+		lsenclosurebattery
+		lsenclosurecanister
+		lsenclosurepsu
+		lsenclosureslot
+		lsrcrelationship
+		unified
+            -h --> Print This Help Screen
+    Note :
+    This check use ssh protocoll.
+"
+if [ "$hlp" = "yes" -o $# -lt 1 ]; then
+        echo "$HELP"
+        exit 0
+fi
+tmp_file=/tmp/v7000_$storage_$query.tmp
+tmp_file_OK=/tmp/v7000_OK.tmp
+outputMess=""
+#echo -ne "IBM Storwize v7000 Health Check\n"
+case $query in
+	lsarray)
+		$ssh $user@$storage $query |sed '1d' > $tmp_file
+		cat $tmp_file |awk '{printf $3}' |grep -i offline
+		if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: MDisk OFFLINE \n"
+		else
+                        outputMess="$outputMess OK: MDisks \n"
+		fi
+		while read line
+			do
+				mdisk_name=$(echo "${line}" | awk '{printf $2}')
+				mdisk_status=$(echo "${line}" | awk '{printf $3}')
+               			if [ $mdisk_status = "online" ]; then
+                       			outputMess="$outputMess OK: MDisks $mdisk_name status: $mdisk_status \n"
+               			else
+					outputMess="$outputMess ATTENTION: MDisks $mdisk_name status: $mdisk_status \n"
+              				exitCode=2
+				fi
+       		done < $tmp_file
+	;;
+	lsdrive)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $2}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: Disk OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: Drive \n"
+                fi
+		drive_total=$(/bin/cat $tmp_file |/usr/bin/wc -l)
+                while read line
+                        do
+                                drive_n=$(echo "${line}" | awk '{printf $1}')
+                                drive_status=$(echo "${line}" | awk '{printf $2}')
+                                drive_role=$(echo "${line}" | awk '{printf $4}')
+                                drive_type=$(echo "${line}" | awk '{printf $5}')
+                                drive_capacity=$(echo "${line}" | awk '{printf $6}')
+                                drive_enclosure=$(echo "${line}" | awk '{printf $10}')
+                                drive_slot=$(echo "${line}" | awk '{printf $11}')
+                                if [ $drive_status = "online" ]; then
+                                        outputMess="$outputMess OK: Drive $drive_n is online \n"
+                                else
+                                        outputMess="$outputMess ATTENTION: Disk $drive_n \nstatus: $disk_status \nrole: $drive_role \ntype: $drive_type \ncapacity: $drive_capacity \nenclosure: $drive_enclosure \nslot: $drive_slot "
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsvdisk)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $5}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: VDisk OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: VDisk \n"
+                fi
+                while read line
+                        do
+                                vdisk_name=$(echo "${line}" | awk '{printf $2}')
+                                vdisk_status=$(echo "${line}" | awk '{printf $5}')
+                                if [ $vdisk_status = "online" ]; then
+                                        outputMess="$outputMess OK: VDisks $vdisk_name status: $vdisk_status \n"
+                                else
+                                        outputMess="$outputMess ATTENTION: VDisks $mdisk_name status: $vdisk_status \n"
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsenclosure)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $2}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: Enclosure OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: Enclosure \n"
+                fi
+                while read line
+                        do
+                                enc_n=$(echo "${line}" | awk '{printf $1}')
+                                enc_status=$(echo "${line}" | awk '{printf $2}')
+                                enc_pn=$(echo "${line}" | awk '{printf $7}')
+                                enc_sn=$(echo "${line}" | awk '{printf $8}')
+                                if [ $enc_status = "online" ]; then
+                                        outputMess="$outputMess OK: Enclosure $enc_n status: $enc_status \n"
+                                else
+                                        outputMess="$outputMess ATTENTION: Enclosure $enc_n status: $enc_status sn: $enc_sn pn: $enc_pn \n"
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsenclosurebattery)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $3}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: Battery OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: Battery \n"
+                fi
+                while read line
+                        do
+                                batt_n=$(echo "${line}" | awk '{printf $2}')
+                                batt_status=$(echo "${line}" | awk '{printf $3}')
+                                batt_charge=$(echo "${line}" | awk '{printf $4}')
+                                batt_rec=$(echo "${line}" | awk '{printf $5}')
+                                batt_charge=$(echo "${line}" | awk '{printf $6}')
+				batt_eol=$(echo "${line}" | awk '{printf $7}')
+                                if [ $batt_status = "online" -a  $batt_rec = "no" -a $batt_charge = "100" -a $batt_eol = "no" ]; then
+                                        outputMess="$outputMess OK: Battery $batt_n status: $batt_status \n"
+                                else
+                                        outputMess="$outputMess ATTENTION: Battery $batt_n status: $batt_statusn recharge: $batt_rec charged: $batt_charge eol: $batt_eol \n"
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsenclosurecanister)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $3}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: Canister OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: Canister \n"
+                fi
+                while read line
+                        do
+                                can_id=$(echo "${line}" | awk '{printf $2}')
+                                can_enc_id=$(echo "${line}" | awk '{printf $1}')
+                                can_stat=$(echo "${line}" | awk '{printf $3}')
+                                can_type=$(echo "${line}" | awk '{printf $4}')
+                                if [ $can_stat = "online" ]; then
+                                        outputMess="$outputMess OK: Canister $can_id enclosure: $can_enc_id status: $can_stat \n"
+                                else
+                                        outputMess="$outputMess ATTENTION: Canister $can_id enclosure: $can_enc_id status: $can_stat type: $can_type \n"
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsenclosurepsu)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $3}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: PSU OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: PSU \n"
+                fi
+                while read line
+                        do
+                                psu_id=$(echo "${line}" | awk '{printf $2}')
+                                psu_enc_id=$(echo "${line}" | awk '{printf $1}')
+                                psu_stat=$(echo "${line}" | awk '{printf $3}')
+                                if [ $psu_stat = "online" ]; then
+                                        outputMess="$outputMess OK: PSU $psu_id enclosure: $psu_enc_id status: $psu_stat \n"
+                                else
+                                        outputMess="$outputMess ATTENTION: PSU $psu_id enclosure: $psu_enc_id status: $psu_stat \n"
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsenclosureslot)
+                $ssh $user@$storage $query |sed '1d' > $tmp_file
+                cat $tmp_file |awk '{printf $3, $4}' |grep -i offline
+                if [ "$?" -eq "0" ]; then
+                        outputMess="$outputMess CRITICAL: EnclosureSlot OFFLINE \n"
+                else
+                        outputMess="$outputMess OK: EnclosureSlot \n"
+                fi
+                while read line
+                        do
+                                slt_enc_id=$(echo "${line}" | awk '{printf $1}')
+                                slt_id=$(echo "${line}" | awk '{printf $2}')
+                                slt_prt1_stat=$(echo "${line}" | awk '{printf $3}')
+                                slt_prt2_stat=$(echo "${line}" | awk '{printf $4}')
+                                slt_drv=$(echo "${line}" | awk '{printf $5}')
+                                drv_id=$(echo "${line}" | awk '{printf $6}')
+                                if [ $slt_prt1_stat = "online" -a $slt_prt2_stat = "online" -a $slt_drv = "yes" ]; then
+                                        outputMess="$outputMess OK: Drive-$drv_id enclosure-$slt_enc_id slot-$slt_id port1-$slt_prt1_stat port2-$slt_prt2_stat\n"
+                                else
+                                        outputMess="$outputMess ATTENTION: Drive-$drv_id enclosure-$slt_enc_id slot-$slt_id port1-$slt_prt1_stat port2-$slt_prt2_stat \n"
+                                        exitCode=2
+                                fi
+                done < $tmp_file
+	;;
+	lsrcrelationship)
+                volume_mirror_prod=$($ssh $user@$storage $query | grep -c "rcrel*")
+                volume_mirror_sync=$($ssh $user@$storage $query | grep -c "consistent_synchronized")
+                                if [ $volume_mirror_prod = $volume_mirror_sync ]; then
+                                        outputMess="$outputMess OK: $volume_mirror_prod mirors are consistent and synchronized \n"
+                                else
+                                        outputMess="$outputMess CRITICAL: sur les $volume_mirror_prod volumes, only $volume_mirror_sync are consistent and synchronized \n"
+                                        exitCode=2
+                                fi
+	;;
+	unified)
+    		# Execute remote command
+		$ssh $user@$storage lshealth -Y > $tmp_file
+    		# Parse remote command output
+    		while read line
+    		do
+        		case $(echo "$line" | cut -d : -f 9) in
+          			OK) # Sensor OK state -> do nothing
+					outputMess="${outputMess}`echo $line | cut -d : -f 7,9 >> $tmp_file_OK`"
+          			;;
+          			WARNING) # Sensor WARNING state
+            				if [ "$exitCode" -lt 1 ]; then
+						exitCode=1;
+	    				fi
+            				# Append sensor message to output
+            				if [ -n "$outputMess" ]; then
+						outputMess="$outputMess +++ ";
+	    				fi
+            				outputMess="${outputMess}STATE WARNING - [`echo $line | cut -d : -f 7`:`echo $line | cut -d : -f 8`] `echo $line | cut -d : -f 10`"
+          			;;
+          			ERROR) # Sensor ERROR state
+            				if [ "$exitCode" -lt 2 ]; then
+						exitCode=2;
+					fi
+            				# Append sensor message to output
+            				if [ -n "$outputMess" ]; then
+						outputMess="$outputMess +++ ";
+					fi
+            				outputMess="${outputMess}STATE CRITICAL - [`echo $line | cut -d : -f 7`:`echo $line | cut -d : -f 8`] `echo $line | cut -d : -f 10`"
+          			;;
+        		esac
+    		done < $tmp_file
+    	# No warnings/errors detected
+    	if [ "$exitCode" -eq 0 ]; then
+		outputMess=`uniq "$tmp_file_OK"`;
+	fi
+  	;;
+	*)
+		echo -ne "Command not found. \n"
+		exit 3
+	;;
+esac
+rm $tmp_file
+rm $tmp_file_OK
+echo -ne "$outputMess\n"
+exit $exitCode
+</code>
+$ssh $user@$storage $query -delim :
+<code>
+######### lsarray
+mdisk_id:mdisk_name:status:mdisk_grp_id:mdisk_grp_name:capacity:raid_status:raid_level:redundancy:strip_size:tier:encrypt:distributed
+:MDisk1:online:0:Pool01_SiteA:694.9TB:online:raid6:2:256:tier0_flash:yes:yes
+######### lshost
+id:name:port_count:iogrp_count:status:site_id:site_name:host_cluster_id:host_cluster_name:protocol:owner_id:owner_name:portset_id:portset_name:partition_id:partition_name:draft_partition_id:draft_partition_name:ungrouped_volume_mapping:location_system_name
+:svc01:2:4:online:::0:svccl01:scsi:::64:portset64:::::yes:
+:svc02:2:4:online:::0:svccl01:scsi:::64:portset64:::::yes:
+######### lsdrive
+id:status:error_sequence_number:use:tech_type:capacity:mdisk_id:mdisk_name:member_id:enclosure_id:slot_id:node_id:node_name:auto_manage:drive_class_id
+:online::member:tier0_flash:52.4TB:0:MDisk1:0:1:19:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:1:1:5:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:2:1:11:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:3:1:15:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:4:1:7:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:5:1:16:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:6:1:13:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:7:1:17:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:8:1:20:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:9:1:21:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:10:1:12:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:11:1:18:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:12:1:10:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:13:1:8:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:14:1:9:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:15:1:14:::inactive:0
+:online::member:tier0_flash:52.4TB:0:MDisk1:16:1:6:::inactive:0
+######### lsmdiskgrp
+id:name:status:mdisk_count:vdisk_count:capacity:extent_size:free_capacity:virtual_capacity:used_capacity:real_capacity:overallocation:warning:easy_tier:easy_tier_status:compression_active:compression_virtual_capacity:compression_compressed_capacity:compression_uncompressed_capacity:parent_mdisk_grp_id:parent_mdisk_grp_name:child_mdisk_grp_count:child_mdisk_grp_capacity:type:encrypt:owner_type:owner_id:owner_name:site_id:site_name:data_reduction:used_capacity_before_reduction:used_capacity_after_reduction:overhead_capacity:deduplication_capacity_saving:reclaimable_capacity:easy_tier_fcm_over_allocation_max:provisioning_policy_id:provisioning_policy_name:replication_pool_link_uid
+:Pool01_SiteA:online:1:13:694.22TB:2048:654.21TB:40.00TB:40.00TB:40.00TB:5:80:auto:balanced:no:0.00MB:0.00MB:0.00MB:0:Pool01_SiteA:0:0.00MB:parent:yes:none:::::no:0.00MB:0.00MB:0.00MB:0.00MB:0.00MB:100%:::7D97EF5B263D688Exxxxxxxxxxxxxxxxxxxx
+######### lsmdisk
+id:name:status:mode:mdisk_grp_id:mdisk_grp_name:capacity:ctrl_LUN_#:controller_name:UID:tier:encrypt:site_id:site_name:distributed:dedupe:over_provisioned:supports_unmap
+:MDisk1:online:array:0:Pool01_SiteA:694.9TB::::tier0_flash:yes:::yes:no:yes:yes
+######### lsvdisk
+id:name:IO_group_id:IO_group_name:status:mdisk_grp_id:mdisk_grp_name:capacity:type:FC_id:FC_name:RC_id:RC_name:vdisk_UID:fc_map_count:copy_count:fast_write_state:se_copy_count:RC_change:compressed_copy_count:parent_mdisk_grp_id:parent_mdisk_grp_name:owner_id:owner_name:formatting:encrypt:volume_id:volume_name:function:volume_group_id:volume_group_name:protocol:is_snapshot:snapshot_count:volume_type:replication_mode:is_safeguarded_snapshot:safeguarded_snapshot_count:restore_in_progress
+:vol_siteA_001:0:io_grp0:online:0:Pool01_SiteA:4.00TB:striped:::::60050xxxxxxxxxx10000000000000000:0:1:not_empty:0:no:0:0:Pool01_SiteA:::yes:yes:0:vol_siteA_001::::scsi:no:0:::no:0:no
+:vol_siteA_002:0:io_grp0:online:0:Pool01_SiteA:4.00TB:striped:::::60050xxxxxxxxxx10000000000000001:0:1:not_empty:0:no:0:0:Pool01_SiteA:::yes:yes:1:vol_siteA_002::::scsi:no:0:::no:0:no
+:vol_siteA_003:0:io_grp0:online:0:Pool01_SiteA:4.00TB:striped:::::60050xxxxxxxxxx10000000000000002:0:1:not_empty:0:no:0:0:Pool01_SiteA:::yes:yes:2:vol_siteA_003::::scsi:no:0:::no:0:no
+######### lsenclosure
+id:status:type:managed:IO_group_id:IO_group_name:product_MTM:serial_number:total_canisters:online_canisters:total_PSUs:online_PSUs:drive_slots:total_fan_modules:online_fan_modules:total_sems:online_sems
+:online:control:yes:0:io_grp0:4657-924:78xxxxx:2:2:2:2:24:0:0:0:0
+######### lsenclosurebattery
+enclosure_id:battery_id:status:charging_status:recondition_needed:percent_charged:end_of_life_warning:canister_id:battery_slot
+:1:online:idle:no:100:no:1:1
+:2:online:idle:no:100:no:2:1
+######### lsenclosurecanister
+enclosure_id:canister_id:status:type:node_id:node_name
+:1:online:node:2:node2
+:2:online:node:1:node1
+######### lsenclosurepsu
+enclosure_id:PSU_id:status:input_power
+:1:online:ac
+:2:online:ac
+######### lsenclosureslot
+enclosure_id:slot_id:port_1_status:port_2_status:drive_present:drive_id:row:column
+:1:::no:::
+:2:::no:::
+:3:::no:::
+:4:::no:::
+:5:::yes:1::
+:6:::yes:16::
+:7:::yes:4::
+:8:::yes:13::
+...
+</code>
+On SVC
+<code>
+######### lsnode
+id:name:UPS_serial_number:WWNN:status:IO_group_id:IO_group_name:config_node:UPS_unique_id:hardware:iscsi_name:iscsi_alias:panel_name:enclosure_id:canister_id:enclosure_serial_number:site_id:site_name
+:svcaxx01::50050xxxx000yyD:online:0:io_grp0:yes::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcaxx01::78xxxxD::1::1:siteA
+:svcbxx01::50050xxxx000yyA4:online:0:io_grp0:no::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcbxx01::78xxxxC::1::2:siteB
+:svcaxx02::50050xxxx000yy5F:online:1:io_grp1:no::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcaxx02::78xxxxL::1::1:siteA
+:svcbxx02::50050xxxx000yy5D:online:1:io_grp1:no::SA2:iqn.xxxxxxx.com.ibm:2145.svccl01.svcbxx02::78xxxxN::1::2:siteB
+######### lsnodebattery
+node_id:node_name:battery_id:status:charging_status:recondition_needed:node_percentage_charge:end_of_life_warning
+:svcaxx01:1:online:idle:no:100:no
+:svcbxx01:1:online:idle:no:100:no
+:svcaxx02:1:online:idle:no:100:no
+:svcbxx02:1:online:idle:no:100:no
+</code>

wiki

User Tools

Site Tools

Differences

Page Tools