wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Spectrum Protect help command ======

===== help command =====

List ALL
<cli prompt='>'>
Protect: ISPPRD1>help
Command line Help for the IBM Spectrum Protect for Linux server
Version 8.1.14

Contents

1.0 Managing the server from the command line
  1.1 Issuing commands from the administrative client
    1.1.1 Starting and stopping the administrative client
    1.1.2 Monitoring server activities from the administrative
    client
    1.1.3 Monitoring removable-media mounts from the
    administrative client
    1.1.4 Processing individual commands from the administrative
    client
    1.1.5 Processing a series of commands from the administrative
    client
    1.1.6 Formatting output from commands
    1.1.7 Saving command output to a specified location
    1.1.8 Administrative client options
  1.2 Issuing commands from the Operations Center
  1.3 Issuing commands from the server console
  1.4 Entering administrative commands
    1.4.1 Reading syntax diagrams
...
3.0 Administrative commands
  3.1 ACCEPT DATE (Accepts the current system date)
  3.2 ACTIVATE POLICYSET (Activate a new policy set)
  3.3 APPROVE PENDINGCMD (Approve commands that are pending
  approval)
  3.4 ASSIGN DEFMGMTCLASS (Assign a default management class)
  3.5 AUDIT
    3.5.1 AUDIT CONTAINER
...
</cli>

List specific command
<cli prompt='>'>
Protect: ISPPRD1>help 3.5.1 
3.5.1 AUDIT CONTAINER

Use the AUDIT CONTAINER command to scan for inconsistencies
between database information and a container in either a cloud or
a directory storage pool.

*  3.5.1.1 AUDIT CONTAINER (Verify the consistency of database
   information for a cloud container)

*  3.5.1.2 AUDIT CONTAINER (Verify the consistency of database
   information for a directory container)
</cli>

Using number from help
<cli prompt='>'>
Protect: ISPPRD1>help 3.5.1.2
3.5.1.2 AUDIT CONTAINER (Verify the consistency of database
information for a directory container)


Use this command to scan for inconsistencies between database
information and a container in a directory-container storage
pool.

You can use this command to complete the following actions for a
container in a directory-container storage pool:

*  Scan the contents of a container to validate the integrity of
   the data extents

*  Remove damaged data from a container

*  Mark an entire container as damaged

*  Unmark data extents that were marked as damaged.

Privilege class

To issue this command, you must have system privilege or
unrestricted storage privilege.

Syntax

>>-AUDit CONTainer--+-container_name---------------------------------------------+-->
                    +-STGpool--=--pool_name--------------------------------------+
                    '-STGpool--=--pool_name--STGPOOLDIRectory--=--directory_name-'

   .-Action--=--SCANAll-----------.
>--+------------------------------+----------------------------->
   '-Action--=--+-SCANAll-------+-'
                +-REMOVEDamaged-+
                +-MARKDamaged---+
                +-SCANDamaged---+
                '-UNMARKDamaged-'
...
</cli>

Using a command
<cli prompt='>'>
Protect: ISPPRD1>Protect: ISPNPRD1>help upd node
3.78.21 UPDATE NODE (Update node attributes)


Use this command to modify the attributes of a registered node.

You must use the RENAME NODE command to change the name of a
registered node.

If you update the node authentication method or the node
SSLREQUIRED setting and there is a same-named administrator,
those administrator ID settings change.
...
Syntax

               (1)
>>-UPDate Node-------node_name---------------------------------->

more...   (<ENTER> to continue, 'C' to cancel)

>--+---------------------------------------------------------+-->
   |  (2)            (3)                                     |
   +--------password-------+-------------------------------+-+
   |                       |                          (4)  | |
   |                       '-FORCEPwreset--=--+-No--+------' |
   |                                          '-Yes-'        |
   '-FORCEPwreset--=--Yes------------------------------------'

>--+-----------------------+------------------------------------>
   |                  (5)  |
   '-PASSExp--=--days------'

>--+------------------------------+--+------------------+------->
   '-CLOptset--=--option_set_name-'  '-CONtact--=--text-'

>--+------------------------+--+----------------------------+--->
   '-DOmain--=--domain_name-'  '-COMPression--=--+-Client-+-'
                                                 +-Yes----+
                                                 '-No-----'

>--+------------------------+--+------------------------+------->
   '-ARCHDELete--=--+-Yes-+-'  '-BACKDELete--=--+-No--+-'
                    '-No--'                     '-Yes-'

>--+-----------------------------+------------------------------>
   '-WHEREDOmain--=--domain_name-'

...
</cli>

ERROR message, just specify the number of error (ANR, ANS, ANE, ANW...)
<cli prompt='>'>
Protect: ISPNPRD1>help 2227
ANR2227W

Discard data process terminated for volume volume name - sufficient
memory is not available.

Explanation:

The process that was deleting data for the volume shown, in preparation
for deleting the volume, has ended due to a shortage of memory.

System action:

The server does not delete the volume.

User response:

See the documentation for the operating system about how to increase
memory for an application.
</cli>
wiki

User Tools

Site Tools

Page Tools
