IBM Tape Diagnostic Tool Standard Edition - V6.0.0 Build 037
Entry Menu
[S] Scan for tape drives (Diagnostic/Maintenance Mode)
[U] Tapeutil (Expert Mode)
[H] Help
[Q] Quit program
Notes:
- During a test, user data on the cartridge will be erased!
- Make sure no other program is accessing the devices used by ITDT!
- A device scan may take several minutes in some cases!
- Q + Enter will always close this program.
- H + Enter will display a Help page.
<[H] Help | [Q] Quit | Command >
Choose U for Tapeutil
Tapeutil Main menu:
---------------------------- General Commands: ----------------------------
[1] Open a Device [5] Reserve Device [9] Mode Sense
[2] Close a Device [6] Release Device [10] Query Driver Ver.
[3] Inquiry [7] Request Sense [11] Display All Paths
[4] Test Unit Ready [8] Log Sense
---------------------------- Tape Drive Commands: -------------------------
[20] Rewind [28] Erase [36] Display Message
[21] Forward Space Filemarks [29] Load Tape [37] Report Density Supp
[22] Backward Space Filemarks [30] Unload Tape [38] Test Encryp. Path
[23] Forward Space Records [31] Write Filemarks [39] Config. TCP/IP Port
[24] Backward Space Records [32] Synchronize Buffers
[25] Space to End of Data [33] Query/Set Parameter
[26] Read and Write Tests [34] Query/Set Tape Position
[27] Read or Write Files [35] Query Encryption Status
---------------------------- Tape Library Commands: -----------------------
[50] Element Information [55] Initialize Element Status
[51] Position to Element [56] Prevent/Allow Medium Removal
[52] Element Inventory [57] Initialize Element Status Range
[53] Exchange Medium [58] Read Device IDs
[54] Move Medium [59] Read Cartridge Location
---------------------------- Service Aid Commands: ------------------------
[70] Dump/Force Dump/Dump [71] Firmware Update
<[H] Help | [Q] Quit | [M] Main Menu | Command >
First Open a device: (chose 1)
ITDT- Open a Device
+---------------------------------------------+
Device Name | /dev/rmt0 |
+---+-----------------------------------------+
Mode | 1 | 1=Read/Write, 2=Read Only, 3=Write Only, 4=Append)
+---+
/dev/rmt21>
Enter device name ex: /dev/rmt21 and [Enter]
Choose 1 to open:
ITDT- Open a Device
+---------------------------------------------+
Device Name | /dev/rmt21 |
+---+-----------------------------------------+
Mode | 1 | 1=Read/Write, 2=Read Only, 3=Write Only, 4=Append)
+---+
<[R] Return | [Q] Quit | Enter to execute >
Confirm with [Enter]
Command Result
+-----------------------------------------------------------------------------+
| Opening Device... |
| Open Device PASSED |
| |
| Device:/dev/rmt21 opened |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+-----------------------------------------------------------------------------+
< [Q] Quit | [N] Next| [P] Previous | + | - | [Enter] Return >
From main menu choose 71 [Firmware Update]
Change default directory with " F /directory " if necessary.
Select Firmware to load:
IBM Tape Diagnostic Tool Standard Edition - Firmware Update
+----------------------------------------------------------+
FW Dir: | /software/input/ |
+----------------------------------------------------------+
[#]
+---+-------------------------------------+-+ +------+
Content: | 0 | D3I0_C90.fmrz |X| Dir OK: | true |
| 1 | D3I1_F05.fmrz | | +------+
| 2 | | |
| 3 | | |
| 4 | | | [F] FW Directory
| 5 | | | [D] Dir Refresh
| 6 | | | [R] Return
| 7 | | |
| 8 | | | [C] Continue
| 9 | | |
+---+-------------------------------------+-+
[Q] Quit | + | - | [N] Next | [P] Previous | Command > 0
Start Update with C
IBM Tape Diagnostic Tool Standard Edition - Firmware Update
Host Bus ID LUN Model Serial Ucode Device
+----+----+----+----+--------------+------------+------+---------------------+
| 7 | 8 | 100| 0 | 03592J1A | 00007897253| 1D12 | |
+----+----+----+----+--------------+------------+------+---------------------+
+-------------------------------------------------------------+
FW Dir: | /software/FW/3592/ |
+-------------------------------------------------------------+
FW File: | D3I1_F05.fmrz |
+-------------------------------------------------------------+
+--------------------+ +----------------------------------+
Status: | UPDATE FIRMWARE | | Waiting for reboot completion |
+--------------------+ +----------------------------------+
Progress: |################### |
+----+---------------+
Remaining Bytes:| |
+---------------+
<[Q] Quit | Command >
Upon successful update, the device will reboot.
Wait until the screen shows:
IBM Tape Diagnostic Tool Standard Edition - Firmware Update
Host Bus ID LUN Model Serial Ucode Device
+----+----+----+----+--------------+------------+------+---------------------+
| 6 | 9 | 137| 0 | 03592J1A | 00007809622| | |
+----+----+----+----+--------------+------------+------+---------------------+
+-------------------------------------------------------------+
FW Dir: | /software/input/ |
+-------------------------------------------------------------+
FW File: | D3I0_C90.fmrz |
+-------------------------------------------------------------+
+------------------------------+
Status: | PASSED |
+------------------------------+
Code: | RESCAN REQUIRED |
+------------------------------+
< [Q] Quit | [Enter] Return >
You have to close the device to finish the operation
Command Result
+-----------------------------------------------------------------------------+
| Closing Device... |
| Close Device PASSED |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+-----------------------------------------------------------------------------+
< [Q] Quit | [N] Next| [P] Previous | + | - | [Enter] Return >