aix:scripts
Table of Contents
Environment variables
Centralize variables for all scripts: .env file
# global variables for all scripts export binpath=/root/script/bin export sn=`basename $0 | cut -d. -f1` export HOSTNAME=`hostname` export logpath=/root/script/log export logname=$logpath/$sn.log export configfile=$binpath/$sn.cfg export destination="test@test.com"
Clean paths and adapters
File_name:
clean_path.sh
Cleanup all unused paths and adapters:
#!/bin/ksh
#set -x
#############################################
#@(#) Remove all disk path not available
#############################################
# version 1.0 21-09-2015
#############################################
dir=`dirname $0`
. $dir/.env
echo "Remove unused adapters and disks"
echo "=============================================================================="
for i in $(lsdev -Cc adapter | grep -vi available | awk '{print $1}')
do
rmdev -dl $i -R
done
for i in $(lsdev -Cc disk | grep -vi available | awk '{print $1}')
do
rmdev -dl $i
done
echo "Before cleaning "
pcmpath query adapter
echo "=============================================================================="
for i in $(lspv|awk '{print $1}')
do
echo $i
Actif_path=`lspath -l $i -F'status:parent:connection'|grep Enabled`
Inactif_path=`lspath -l $i -F'status:parent:connection'|grep -v Enabled`
#echo $Actif_path
if [ ! -z "$Actif_path" ] # only remove path when at least one actif path exist
then
if [ ! -z "$Inactif_path" ] # only continue if inactif paths exists
then
for j in $(lspath -l $i -F'status:parent:connection'|grep -v Enabled)
do
STATUS=$(echo $j | awk -F: '{print $1}')
PARENT=$(echo $j | awk -F: '{print $2}')
CONNECTION=$(echo $j | awk -F: '{print $3}'|awk '{print $1}')
# echo $j
# echo $STATUS
# echo $PARENT
# echo $CONNECTION
rmpath -l $i -p $PARENT -w $CONNECTION -d
done
else
echo " no inactif path to remove"
fi
else
echo "No enabled path for $i, clean paths manually"
fi
done
echo "=============================================================================="
echo "After cleaning"
pcmpath query adapter
exit
Centralize core
File_name:
centralize_core.sh
Centralize all cores from all users and system cores:
#!/bin/ksh
##################################################
#@(#) centralize all core from all users in /var/core
##################################################
# chcore [-R load_module] [<options>] [<username>|-d]
# where <options> is one or more of the following:
# -c {on|off|default} : setting for core compression
# -p {on|off|default} : setting for core location
# -l {<path>|default} : specify directory to use
# -n <on|off|default} : setting for core naming
#
# The -d option will set the default value for the system.
# this script add an entrie in /etc/security/user
# create a filesystem /var/core
# active at next user connection
# Check if a file is a core or just a file name do:
# /usr/lib/ras/check_core <core_file>
# version: 1.0 10-05-2012 Manu
##################################################
dir=`dirname $0`
. $dir/.env
CORE_PATH=/var/core
CORELV=corelv
VG=rootvg
SZ=1G
###########################################################################
# usage ()
#
# Parameters:
###########################################################################
usage()
{
echo "Usage: $0 (start | stop | status)"
echo "\tcentralize all core from all users in /var/core"
}
###########################################################################
#
# main ()
#
###########################################################################
main () {
case "$1" in
start)
echo `date`" : Begin of "$sn" "$HOSTNAME"\n"
lsfs -a | grep $CORE_PATH > /dev/null 2>&1
if [ $? -ne 0 ]
then
NBR_COPIES=`lslv hd5 | grep COPIES | awk '{print $2}'`
mklv -t jfs2 -c $NBR_COPIES -y $CORELV $VG $SZ
crfs -vjfs2 -m $CORE_PATH -d $CORELV -Ayes
mount $CORE_PATH
chmod 777 $CORE_PATH
chcore -c on -p on -l $CORE_PATH -n on -d
syscorepath -p $CORE_PATH
else
lscore | grep "location" | grep $CORE_PATH > /dev/null 2>&1
if [ $? -eq 0 ]
then
chcore -c on -p on -n on
syscorepath -p $CORE_PATH
else
chcore -c on -p on -l $CORE_PATH -n on -d
syscorepath -p $CORE_PATH
fi
fi
lscore
echo "\n"`date`" : End of "$sn" "$HOSTNAME
;;
stop)
echo `date`" : Begin of "$sn" "$HOSTNAME"\n"
chcore -c off -p off -n off
lscore
echo "\n"`date`" : End of "$sn" "$HOSTNAME
;;
status)
lscore
;;
*)
usage
exit 1
;;
esac
}
main $* 2>&1 | tee $logname
Check disks path on vscsi
File_name:
show_path_mismatch.sh
Check the paths on vscsi and report error in case of bad mapping with 2 VIOS:
#!/usr/bin/ksh
#set -x
#############################################
#@(#) Check if path are correctly set on VIOS
#############################################
# check if a disk on LPAR has the same path
# ID on both VIOS
# version 1.0 2-10-2012 Manu
#############################################
dir=`dirname $0`
. $dir/.env
#------------------------------------------------
# usage ()
#------------------------------------------------
usage()
{
rep=$*
case "$rep" in
* )
echo "Usage: "$0
echo "\tNo parameter required"
echo "\tOption -v verbose"
echo "\tCheck virtual disk address on each path print an error if the paths have different connection address"
exit 1
;;
esac
}
#------------------------------------------------
# dmsg ()
#------------------------------------------------
dmsg()
{
if [ $debug == "yes" ]
then
echo "$1"
fi
}
#------------------------------------------------
# check_path ()
#------------------------------------------------
check_path() {
hdisk=$1
VSCSI0=`lspath -l $hdisk -F"parent" | head -1`
VSCSI1=`lspath -l $hdisk -F"parent" | tail -1`
if [[ "$VSCSI0" == "$VSCSI1" ]]
then
echo $hdisk:
type=$(lsattr -El sys0 -a modelname | cut -d " " -f2 | sed 's/IBM,//g')
if [[ "$type" == "8406-70Y" ]]
then
echo "******** $hdisk single path disk on IVM *********"
else
echo "******** ERROR $hdisk single path disk on dual VIOS Server *********"
fi
else
CONNECT0=`odmget -q "name=$hdisk and parent=$VSCSI0 and path_status=1" CuPath | grep connection | awk '{print $3}'`
PRIO0=`lspath -AEH -l $hdisk -p $VSCSI0 | grep priority | awk '{print $2}'`
CONNECT1=`odmget -q "name=$hdisk and parent=$VSCSI1 and path_status=1" CuPath | grep connection | awk '{print $3}'`
PRIO1=`lspath -AEH -l $hdisk -p $VSCSI1 | grep priority | awk '{print $2}'`
if [[ "$CONNECT0" != "$CONNECT1" ]]
then
echo $hdisk:
echo "******** ERROR on disk $hdisk paths missmatch on the 2 VIOS *********"
dmsg "vscsi= $VSCSI0 connection= $CONNECT0 priority= $PRIO0 "
dmsg "vscsi= $VSCSI1 connection= $CONNECT1 priority= $PRIO1 "
echo "########################"
else
dmsg "$hdisk:"
dmsg "vscsi= $VSCSI0 connection= $CONNECT0 priority= $PRIO0 "
dmsg "vscsi= $VSCSI1 connection= $CONNECT1 priority= $PRIO1 "
dmsg "########################"
fi
fi
}
###########################################################################
# main ()
#
# Check if a disk is mapped on both VIOS with the same adress 0x8100000000000000
#
#root@nim]/root# ssh padmin@vio1 ioscli lsmap -vadapter vhost3
#SVSA Physloc Client Partition ID
#--------------- -------------------------------------------- ------------------
#vhost3 U9117.MMA.10579F0-V1-C16 0x00000006
#
#VTD vtscsi3
#Status Available
#LUN 0x8100000000000000
#
###########################################################################
main () {
debug=no
while [ $# -gt 0 ]
do
case "$1" in
-v) debug=yes ;;
-h|help) usage
exit 1;;
esac
shift
done
dmsg "`date` : Begin of $sn $(hostname)"
dmsg "########################"
for HDISK in $(lsdev -Cc disk | grep "Virtual" | awk '{print $1}')
do
check_path $HDISK
done
dmsg "`date` : Begin of $sn $(hostname)"
}
main $* 2>&1 | tee $logname
DSH VIOS
File_name:
dshvio
Do an ssh on all VIOS, on padmin user or on root. Syntax: root@coenim:/:# dshvio -? Valid parameters are: -r for a root command -n for a list of VIO servers -n vios1 -n vios1,vios2 Examples: A regular VIOS command:
root@coenim:/:# dshvio ioslevel ========================= VIO server --> coevios1 ========================= 1.5.1.1-FP-10.1 ========================= VIO server --> coevios2 ========================= 1.5.1.1-FP-10.1
#!/bin/ksh
# Created by DeanRowswell, IBM, April 26, 2006
# Modified by Dean Rowswell, IBM, October 11, 2007
# Added a check for the -r flag for a root user command
# NOTE: this flag will require the expect RPMpackage to be installed
# Modified by Dean Rowswell, IBM, October 12, 2007
# Added a check for the -n flag tospecify a singleor multiple VIO servers
#
#------------------------------------------------------------------------------
# Assumption: this server is a trusted host for running ssh commandsto
# the VIO server(s)
# To set this up:
# ssh-keygen -t dsa (press ENTER for all prompts)
# scp $HOME/.ssh/id_dsa.pub padmin@VIOserver:.ssh/authorized_keys2
#
# NOTE: if the VIO server respondswith "rksh: ioscli: not found" then
# login to the VIO server and change to the root shell via oem_setup_env.
# Edit /etc/ssh/sshd_config
# Change: PermitUserEnvironment no
# To: PermitUserEnvironment yes
# Run: stopsrc -s sshd ; startsrc -s sshd
#------------------------------------------------------------------------------
#===========================================================#
# Define the listof VIO servers in this variable
#===========================================================#
VIOS="vios1 vios3"
#===========================================================#
DisplayUsage() {
echo "Syntax: dshvio COMMAND\n Run dshvio -? for the valid parameters"
exit
}
if [ ${#*} -eq 0 ]
then
DisplayUsage
else
while getopts :rn: PARMS
do
case $PARMS in
r) lslpp -L|grep -w expect >/dev/null
if[ $? -ne 0 ]
then
echo "ERROR: cannot use -r flag because expect\
RPM package is not installed"
exit 1
else
ROOT=1
fi;;
n) VIOS=${OPTARG}
VIOS=`echo ${VIOS}|sed 's/,/ /g'`;;
?) echo"Valid parameters are:\n -r for a root command\n\
-n for a list of VIO servers\n -n vios1\n -n vios1,vios2" ; exit;;
esac
done
shift $(($OPTIND -1))
VIOSCMD=${*}
if [ ${#VIOSCMD} -eq 0 ]
then
DisplayUsage
fi
fi
for VIO in ${VIOS}
do
ping -c1 ${VIO}>/dev/null 2>/dev/null
if [ $? -eq 0 ]
then
echo "======================\nVIO server --> ${VIO}\n\
======================"
if [ ${ROOT:=0} -ne 1 ]
then
ssh padmin@${VIO} "ioscli${VIOSCMD}"
else
expect -c "spawn ssh padmin@${VIO} ;expect\"\$\*\";\
send \"oem_setup_env\\r\";expect \"\#\*\";send \"${VIOSCMD}\\r\";\
send \"exit\\r\";expect \"\$\*\";send \"exit\\r\""|egrep -v "^spawn\
|^Last|oem_setup_env|^exit|^#"
fi
else
echo "===================\\nVIO server --> ${VIO}\n\
==================="
echo "VIOserver: ${VIO} is not responding"
fi
done
mail_files
#!/bin/sh
#@(#) script to email files as attachments.
# ------------------------------------
# Additional documentation for this script, including a brief introdcution
# to MIME can be found at: http://home.clara.net/dwotton/unix/mail_files.htm
# Written: Dave Wotton, July 1998, (Cambridge UK)
# This script comes with no warranty or support. You are
# free to modify it as you wish, but please retain an
# acknowledgement of my original authorship.
# Amended: Dave Wotton, 6/3/99
# -t flag now optional. subject also optional
#
# Amended: Dave Wotton, 3/8/00
# added -b and -u options. By default a file-list which is not
# preceded by a -n, -b, or -u flag is now NOT encoded (the previous
# default was to base64 encode it.).
#
# Amended: Dave Wotton, 10/10/00
# added a -c (cc:) option.
# Added a tty -s test to prevent the prompt to enter the text body
# being displayed when not connected to a tty. (The text body is
# still required though. /dev/null will suffice.)
#
# Amended: Dave Wotton, 24/2/01
# Now uses perl to perform the base64 encoding, as it comes as
# standard on most modern Unixes. (You need the perl MIME package
# though, which I believe is standard. )
# Amended: Dave Wotton, 22/09/01
# Now creates a "To:" header and uses the sendmail -t flag to
# duplicate this as the envelope recipients, rather than using the
# user supplied list of addresses simply as envelope recipients.
# This confused some mail clients, specifically Lotus Notes.
# Amended: Dave Wotton, 30/09/01
# Now initialises the main variables, so that previously set
# environment variable values (eg. $CC) aren't used instead.
# Enable multiple occurrences of the -t and -c flags. Thanks to
# Jason Judge for these suggestions.
# Usage: mail_files [-t] mailid [ -c mailid ] [ -s subject ] [ -f mailid ]
# [-n file_list] [-u file_list] [-b file_list] [-r Reply-To] file_list
#
# -f : The mailid of the sender ( defaults to your userid )
# Only userids that have been defined as "trusted" in the sendmail
# config file can make use of the -f option. For non-trusted users
# any value specified by this parameter will be ignored by
# sendmail.
# -t : The mailid of the recipient. Mandatory, no default
# multiple mailids can be specified, separated by commas.
# -c : The mailid of any carbon-copy recipients. Optional.
# multiple mailids can be specified, separated by commas.
# -s : The subject string. Optional, default = "Not specified".
# Enclose in quotes.
# -n : no-encode: indicates a list of files which are NOT to be base64
# or uuencode encoded. Multiple files may be enclosed in double
# quotes. Usual wildcard notation can be used. This option is
# for completeness and can be omitted because the default action
# is not to encode the file-list.
# -b : base64 encoding: indicates a list of files which are to be
# base64 encoded. Multiple files may be enclosed in double quotes.
# Usual wildcard notation can be used.
# -u : uuencode encoding: indicates a list of files which are to be
# uuencode encoded. Multiple files may be enclosed in double
# quotes. Usual wildcard notation can be used.
# -r : Reply to. Used for a single reply to. Permit to force the
# reply to someone.
# -e : SMTPoriginator
# -x : The mailid of any blind copy recipients. Optional.
# multiple mailids can be specified, separated by commas.
# file_list : The list of files to send as attachments with no-encoding
# (same as -n option, but the file list does not need to be
# enclosed in quotes if more than one file specified).
# Usual wildcard notation can be used.
# The program will also prompt for text to be supplied on standard input
# as the main text of the message.
# eg.
# 1) mail_files Dave.Wotton -b file9.gif t*.htm < /dev/null
#
# email file9.gif as a base64 encoded attachment and the t*.htm
# files unencoded.
#
# 2) mail_files Dave.Wotton -s "my test" -b "file1.gif file2.gif" \
# < /dev/null
#
# email file1.gif and file2.gif as base64 encoded attachments.
# The script makes use of perl's MIME package to perform the base-64
# encoding/decoding.
# Note that files destined for Windows environments should have a name of
# the form aaaa.bbb where aaaa is up to 8 characters long, and bbb is a
# 3 character sufix. The suffix determines which program is used to
# display/process the data at the remote end.
# Simple text files can be emailed unencoded. Binary files, or text files
# with long lines ( ie > 1000 chars ) should use the base64 or uuencode
# encoding procedures. Base64 is preferred because it is more universally
# supported. In particular, most PC mail-clients can automatically decode
# base64 encoded attachments. Note that simple text files with short lines
# which are destined for PC environments should not be base64 encoded.
# This is because PCs use a different line-break character to Unix.
# If the text is base64 encoded, the line-breaks are not converted
# automatically and so the data arrives at the remote end without
# line-breaks.
# set up a 'usage' routine
# ------------------------
dir=`dirname $0`
. $dir/.env
max_size=1 # max trace file size (MB)
tracefile=$logpath/$sn.trc
echo "==> $(date '+%d/%m/%y %H:%M:%S') $(pwd)#$0 $*" >> $tracefile
###########################################################################
# usage ()
#
# Parameters:
###########################################################################
usage()
usage()
{
[ "$1" ] && ( echo $* ; echo "" )
cat <<!
Usage: mail_files [-t] mailid [ -c mailid ] [ -s subject ] [ -f mailid ]
[-n file_list] [-u file_list] [-b file_list] file_list
!
exit 4
}
###########################################################################
# main ()
###########################################################################
if ! test -f $tracefile
then
touch $tracefile
chmod 666 $tracefile
fi
# Initialise main variables ...
# -------------------------
FROM=$LOGNAME
SUBJ=${SUBJ:-"Not specified"}
TO="" ; CC="" ; SUBJ="" ; NOENC="" ; BASE64="" ; UUE="" ; RPL="" ; SO="" ; BCC=""
# First parse the command line options. Using getopts means the parameters
# can be supplied in any order. But first we handle the first parameter,
# which may be a recipient, without a -t flag...
case "$1" in
-* ) : ;; # ignore it, let getopts handle flags
* ) TO=$1 ; shift ;;
esac
while getopts f:s:t:c:n:b:u:r:e:x: OPT
do
case $OPT in
"f" ) FROM=$OPTARG ;;
"t" ) TO="$TO,$OPTARG" ;;
"c" ) CC="$CC,$OPTARG" ;;
"s" ) SUBJ=$OPTARG ;;
"n" ) NOENC="$NOENC $OPTARG" ;;
"b" ) BASE64="$BASE64 $OPTARG" ;;
"u" ) UUE="$UUE $OPTARG" ;;
"r" ) RPL="$RPL,$OPTARG" ;;
"e" ) SO="-r $OPTARG" ;;
"x" ) BCC="$BCC,$OPTARG" ;;
* ) usage ;;
esac
done
#SO=${SO:-"-r $mail_undeliverable"}
#FROM=${FROM:-"$default_sender"}
shift `expr $OPTIND - 1`
if [ "$TO" = "" ]
then
usage "An addressee must be specified"
fi
# All remaining parameters are files not requiring encoding ...
# ---------------------------------------------------------
# Build up $FILES as the list of non-encoded files. Use sed to remove
# any leading space from the variable.
FILES=`echo $NOENC $*|sed 's/^ //'`
Attachment="1"
if [ "$BASE64" = "" -a "$FILES" = "" -a "$UUE" = "" ]
then
# usage "At least one file must be specified"
Attachment=""
fi
# Remove leading commas from TO, CC ...
# ---------------------------------
TO=`echo $TO | sed 's/^,//'`
CC=`echo $CC | sed 's/^,//'`
BCC=`echo $BCC | sed 's/^,//'`
# Validate that the files exist ...
# -----------------------------
for F in $FILES $BASE64 $UUE
do
if [ ! -r $F ]
then
echo "Error: File $F does not exist / is not readable."
echo "Exiting. ( Mail not sent )."
exit 5
fi
done
tty -s && echo "Enter text of main message ( finish with CTRL-D ) ..."
# Now do the work ...
# ---------------
# The generated mail message is output onto standard out, which is then
# piped in to sendmail.
(
cat <<!
From: $FROM
Subject: $SUBJ
To: $TO
Reply-To: $RPL
!
[ "$CC" ] && echo "Cc: $CC"
[ "$BCC" ] && echo "Bcc: $BCC"
[ "$Attachment" ] && cat <<!
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="DMW.Boundary.605592468"
This is a Mime message, which your mail program may not understand. Parts
of the message will appear as text. If the remainder appears as random
characters in the message body, instead of as attachments, then you'll
have to extract these parts and decode them manually.
--DMW.Boundary.605592468
Content-Type: text/plain; name="message.txt"; charset=iso-8859-1
Content-Disposition: inline; filename="message.txt"
Content-Transfer-Encoding: 7bit
!
# Read the standard input as the main text of the message ...
# -------------------------------------------------------
echo "\n" # Avoid problems with files starting with blanc
cat -
# Now process the non-encrypted attachments ...
# -----------------------------------------
if [ "$FILES" ]
then
for F in $FILES
do
BASE=`basename $F`
echo --DMW.Boundary.605592468
echo Content-Type: application/octet-stream\; name=\"$BASE\"
echo Content-Disposition: attachment\; filename=\"$BASE\"
echo Content-Transfer-Encoding: 7bit
echo
cat $F
done
fi
# Now process the base64 encrypted attachments ...
# --------------------------------------------
if [ "$BASE64" ]
then
for F in $BASE64
do
BASE=`basename $F`
echo --DMW.Boundary.605592468
echo Content-Type: application/octet-stream\; name=\"$BASE\"
echo Content-Disposition: attachment\; filename=\"$BASE\"
echo Content-Transfer-Encoding: base64
echo
perl -e '
use MIME::Base64 qw(encode_base64);
local($/) = undef;
print encode_base64(<STDIN>);' < $F
done
fi
# Now process the uuencode encrypted attachments ...
# ----------------------------------------------
# Sorry, this bit is untested - I haven't got a mail-client which can
# handle uuencoded MIME messages automatically, so can't test if the
# 'Content-Transfer-Encoding: uuencode' line is correct and whether I
# need the uuencode "begin" and "end" lines.
if [ "$UUE" ]
then
for F in $UUE
do
BASE=`basename $F`
echo --DMW.Boundary.605592468
echo Content-Type: application/octet-stream\; name=\"$BASE\"
echo Content-Disposition: attachment\; filename=\"$BASE\"
echo Content-Transfer-Encoding: uuencode
echo
uuencode < $F xxx
done
fi
# append the final boundary line ...
[ "$Attachment" ] && echo --DMW.Boundary.605592468--
) | /usr/lib/sendmail -t $SO -v >> $tracefile
exit $?
check_filesystems
check_fs.cfg
#filesystem_name:alert(%):alternate_email #mail_default="$mail_system" /tmp:80 /usr:96 /cdrom:100 /mnt:100 /db*:98
check_fs.sh
#!/usr/bin/ksh
#set -x
##################################################
#@(#) send an alert if filesystems usage is higher than threshold
##################################################
# associate file is checkfs.cfg (exceptions)
# please do not modify this script use checkfs.cfg
# checkfs.cfg format:
# fs_name:pct_threshold(:alternate_email)
# mail_default (default email address)
# check also GPFS quotas if used
# version: 1.1 10-02-2010 Manu
##################################################
dir=`dirname $0`
. $dir/.env
pcalert_def=90 # default value
logalt=$logpath/checkfs1.log # alternate log for particular USERS
tmpcfg=$logpath/$sn.txt
tmpscript=$logpath/$sn.scr
nb_file=25
nb_dir=15
# eval to interpret the value of the vaiables set into config file
eval dest=$(cat $configfile | grep "^ *#" | grep "mail_default" | cut -d"=" -f2 | sed 's/"//g')
#------------------------------------------------
# check_gpfs ()
#------------------------------------------------
check_gpfs()
{
# test gpfs quota if applicable
lsfs -a | sed '1d' | awk '{print $4}' | grep "mmfs" > /dev/null 2>&1
if [ $? -eq 0 ]
then
quotaalert=2000000
for i in sybase kplus
do
used=$(mmlsquota -u $i |grep clkpfs|awk '{print $3}')
max=$(mmlsquota -u $i |grep clkpfs|awk '{print $4}')
diff=$(expr $max - $used)
if [ $diff -lt $quotaalert ]
then
echo "***** GPFS Quota-WARNING *****" >> $logname
echo " User $i has ounly $diff KB free quota " >> $logname
echo " Reduce used space or use mmedquota -u $i to modifie quota" >> $logname
fi
done
fi
}
#------------------------------------------------
# info_fs ()
#------------------------------------------------
info_fs()
{
echo "*******************"
echo "***** WARNING ***** $(echo $fs) ---------> $(echo $i|cut -f 1 -d%) %"
echo "*******************"
echo " "
echo "les $nb_file + gros fichiers du filesystem $fs"
echo "les $nb_file + gros fichiers du filesystem $fs" | sed "s/./-/g"
find $fs -xdev -type f -ls | sort +6nr | head -$nb_file
echo " "
echo "les $nb_dir + gros répertoires du 1° niveau inférieur du filesystem $fs"
echo "les $nb_dir + gros répertoires du 1° niveau inférieur du filesystem $fs" | sed "s/./-/g"
du -ms $fs/* | sort -nr | head -$nb_dir
echo " ";echo " "
}
#------------------------------------------------
# generate_case_file ()
#------------------------------------------------
generate_case_file()
{
cat $configfile | grep -v "^ *#" > $tmpcfg
echo "" >> $tmpcfg
cat $tmpcfg | sed 's/:/)\ pct=/' | sed 's/:/\ mail=/' | sed '$s/^/\*)\ pct=pcalert_def/' | sed -e "s/pcalert_def/$pcalert_def/" | sed '2,$s/^/\\n/' | sed 's/$/;;/' > $tmpcfg
}
#------------------------------------------------
# check_fs ()
#------------------------------------------------
check_fs()
{
clauses=$(cat $tmpcfg)
for i in $(df -k | egrep -v "Filesystem|:|/proc" | grep -v ":" | grep "/dev/" | awk '{print $4 $7}')
do
fs=`echo $i | cut -f 2 -d%`
pct_fs=`echo $i | cut -f 1 -d%`
log=$logname
mail=""
cmd="case $fs in \n $clauses \n esac"
echo $cmd > $tmpscript
. $tmpscript > /dev/null
#echo "$fs seuil=$pct current_value=$pct_fs $mail"
if [ $pct_fs -gt $pct ]
then
echo "$fs alerte"
if [[ $mail != "" ]]
then
log=$logalt
altdest=$mail
fi
info_fs >> $log
fi
done
}
#------------------------------------------------
# send_alert ()
#------------------------------------------------
send_alert()
{
test -e $logname && $path_script/mail_files $dest -s "Filesystems on $(hostname)" -e $mail_undeliverable < $logname
test -e $logalt && $path_script/mail_files $altdest -s "Filesystems on $(hostname)" -e $mail_undeliverable < $logalt
}
###########################################################################
#
# main ()
#
###########################################################################
main () {
cd $path_script
test -e $logname && rm $logname
test -e $logalt && rm $logalt
generate_case_file
check_fs
check_gpfs
send_alert
test -e $tmpcfg && rm $tmpcfg
test -e $tmpscript && rm $tmpscript
}
main > /dev/null 2>&1
List VIOS MAP disk
config_disk_vios.sh
#!/bin/ksh
#set -x
#@(#) Recupere le mapping des disks des serveurs sur le SAN
# Ce script doit être precede par une collecte d'info sur tous les
# serveur NIM, en lancant collect_info_all_lpar.sh sur NIM.
# Collecte les informations sur les partitions, les VIOS, les DS
# les HMC, afin de reconstituer les ID des disques des LPARS
# sur les DS et les VIOS associés
# Le fichier de sortie est au format HTML : $TMP_HTML_FILE
# version 1.0 20-09-2009 Manu
dir=`dirname $0`
. $dir/.env
export LANG=C
TIME=`date`
NUM=`date +%d-%m-%Y`
HTML_CONFIG_DIR=$path_script/config_dir_vios_html
PATH_DATA=$logpath/config_lpar
TMP_DIR=$logpath/config_lpar/tmp
TMP_FILE=$TMP_DIR/list_serial
LIST_VIOS=$TMP_DIR/list_vios
LIST_VM=$TMP_DIR/list_vm
TMP_INFO=$TMP_DIR/info_vm_tmp
TMP_VIOS=$TMP_DIR/info_vios_tmp
TMP_HTML_FILE=$logpath/index_vios.html
RET_DAY="+15"
#####################################
# initialize
initialize()
{
if [ ! -d $PATH_DATA ]
then
mkdir -p $PATH_DATA
fi
if [ ! -d $logpath ]
then
mkdir -p $logpath
fi
if [ ! -d $TMP_DIR ]
then
mkdir -p $TMP_DIR
fi
}
#####################################
# usage
usage()
{
rep=$*
case "$rep" in
* )
echo "Usage: "$0
echo "\tPas de paramètre requis"
echo "\tce script créé un fichier de mapping des disks des LPARs sur les VIOS et les DS8000"
echo "\tLe fichier de sortie est au format HTML : $TMP_HTML_FILE"
exit 1
;;
esac
}
#####################################
# convert an id to hexadecimal
convert_to_hexa()
{
echo $1 > $TMP_DIR/TEST
perl -e 'printf ("%X",<STDIN>);' < $TMP_DIR/TEST
}
#####################################
# format an hexadecimal id
recreate_lpar_id()
{
id1=$1
id=`echo $id1 | tr 'A-Z' 'a-z'`
lenght_id=`echo $id | wc -c`
let lenght_id=9-lenght_id
id_begin=""
i=0
while (( $i < $lenght_id ))
do
id_begin=`echo $id_begin"0"`
let i="($i +1)"
done
full_id="0x$id_begin$id"
echo $full_id
}
#####################################
# function get VIOS info
get_vios()
{
vios=$1
vg=$2
# VIOS hdiskibm
COL_VIOS=""
COL_HDVIOS=""
if [[ "$vios" != "" ]]
then
cat $TMP_INFO.$vg.pv | while read PV
do
# search for VIOS and hdisk name if Virtual Disk
grep "$PV " $TMP_INFO"8" | grep "Virtual" > /dev/null 2>&1
if [ $? -eq 0 ]
then
LUN_ID_VM=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $3}'`
HDVIOS=`grep -p "$PARTITION_ID" $TMP_VIOS.$vios.lsmap | grep "0x$LUN_ID_VM" | awk '{print $1}'`
COL_HDVIOS="$COL_HDVIOS<br>$HDVIOS"
COL_VIOS="$COL_VIOS<br>$vios"
fi
done
fi
COL_VIOS=`echo $COL_VIOS | cut -c5-`
COL_HDVIOS=`echo $COL_HDVIOS | cut -c5-`
if [[ $COL_HDVIOS = "" ]]
then
COL_VIOS="<br>"
COL_HDVIOS="<br>"
fi
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_VIOS/g" >> $TMP_HTML_FILE
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_HDVIOS/g" >> $TMP_HTML_FILE
}
#####################################
# function get VIOS info
get_lun_id()
{
vios1=$1
COL_IBMID=""
COL_LUNSZ=""
LUNSZ1=""
cat $TMP_INFO.$VG.pv | while read PV
do
# search for LUN ID
TYPE=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $2}'`
case "$TYPE" in
Virtual) HDVIRT=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $3}'`
HDVIOS=`grep -p "$PARTITION_ID" $TMP_VIOS.$vios1.lsmap | grep "0x$HDVIRT" | awk '{print $1}'`
LUNID=`cat $TMP_VIOS.$vios1.pv | grep "$HDVIOS " | awk '{print $3}'`
COL_IBMID="$COL_IBMID<br>$LUNID"
LUNSZ1=`cat $TMP_INFO"3" | grep -p "$PV:" | sed '/^$/d' | tail -1`
if [[ "$LUNSZ1" == "" ]]
then
LUNSZ1=`grep $LUNID $TMP_DIR/DS.* | awk '{print $3}' | cut -d"." -f1`
fi
;;
MPIO) LUNID=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $3}'`
COL_IBMID="$COL_IBMID<br>$LUNID"
LUNSZ1=`cat $TMP_INFO"3" | grep -p "$PV:" | sed '/^$/d' | tail -1`
if [[ `echo $LUNSZ1` == "" && `echo $LUNID` != "" ]]
then
LUNSZ1=`cat $TMP_DIR/DS.* | grep "$LUNID" | awk '{print $3}' | cut -d"." -f1`
fi
echo $LUNSZ1;;
SCSI) COL_IBMID="$COL_IBMID<br>"
LUNSZ1=`cat $TMP_INFO"3" | grep -p "$PV:" | sed '/^$/d' | tail -1`;;
esac
COL_LUNSZ="$COL_LUNSZ<br>$LUNSZ1 GB"
#if [[ "$LUNID" -ne "" ]]
#then
# LUNSZ1=`cat $TMP_DIR/DS.* | grep "$LUNID" | awk '{print $3}'`
#fi
done
COL_IBMID=`echo $COL_IBMID | cut -c5-`
COL_LUNSZ=`echo $COL_LUNSZ | cut -c5-`
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_IBMID/g" >> $TMP_HTML_FILE
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_LUNSZ/g" >> $TMP_HTML_FILE
# Add free cell on the array
echo " </tr>" >> $TMP_HTML_FILE
let CNT=1
while [ ${CNT} -lt ${ROW_SPAN_VG} ]
do
echo " <tr></tr>" >> $TMP_HTML_FILE
let CNT=CNT+1
done
}
##########################
# create info_vm
create_info_vm()
{
# Create /tmp/info_vm_tmp<x> for each VM
# info_vm_tmp1 : serial number and partition ID
# info_vm_tmp2 : lspv
# info_vm_tmp3 : lspv <hdiskx> give the pv size
# info_vm_tmp4 : lsvg <vg> give the VG total and used space
# info_vm_tmp5 : lsvg -l <vg>
# info_vm_tmp6 : df -m
# info_vm_tmp7 : lsps -a
# info_vm_tmp8 : lscfg -vpl <hdiskx>
# info_vm_tmp9 : lsvg -o
# info_vm_tmp10 : lsvg - lsvg -o (only inactive VG)
find $TMP_DIR -name "info_vm_tmp*" -exec rm {} \;
COUNT=0
cat $PATH_DATA/collect_info.$VM_NAME | while read i
do
echo $i | grep "##########" > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo $i >> $TMP_INFO$COUNT
else
let "COUNT=COUNT+1"
fi
done
# format info_vm_tmp3
cat $TMP_INFO"3" | while read line
do
echo $line | grep ":" > /dev/null 2>&1
if [[ $? -eq 0 ]]
then
print "\n"$line >> $TMP_INFO"3_1"
else
let "line1=line/1024"
echo $line1 >> $TMP_INFO"3_1"
fi
done
mv $TMP_INFO"3_1" $TMP_INFO"3"
# format info_vm_tmp8 : hdisk<x> serial_number type (SCSI,MPIO,Virtual)
HDISK=""
cat $TMP_INFO"8" | egrep "hdisk|Serial Number" | while read line
do
if [[ `echo $HDISK` != "" ]]
then
serial=`echo $line | grep "Serial Number" | sed -e 's/Serial Number//' | sed -e 's/\.//g' `
echo $HDISK $TYPE $serial >> $TMP_INFO"8_1"
HDISK=""
fi
echo $line | awk '{print $1}' | grep hdisk > /dev/null 2>&1
if [ $? -eq 0 ]
then
HDISK=`echo $line | awk '{print $1}' | grep hdisk`
echo $line | grep "Virtual SCSI" > /dev/null 2>&1
if [ $? -eq 0 ]
then
LUNID=`echo $line | awk '{print $2}' | cut -d- -f5 | sed "s/L//"`
TYPE="Virtual"
echo $HDISK $TYPE $LUNID >> $TMP_INFO"8_1"
HDISK=""
else
echo $line | grep "2107" > /dev/null 2>&1
if [ $? -eq 0 ]
then
TYPE="MPIO"
else
TYPE="SCSI"
fi
fi
fi
done
mv $TMP_INFO"8_1" $TMP_INFO"8"
# read active volum groups
cat $TMP_INFO"2" | egrep "active|concurrent" | awk '{print $3}' | grep -v rootvg > $TMP_INFO"10"
echo "rootvg" > $TMP_INFO"9"
for VGA in `cat $TMP_INFO"10"`
do
cat $TMP_INFO"9" | grep $VGA > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo $VGA >> $TMP_INFO"9"
fi
done
# read inactive volum groups
cat $TMP_INFO"2" | egrep -v "active|concurrent" | awk '{print $3}' > $TMP_INFO"11"
cat /dev/null > $TMP_INFO"10"
for VGI in `cat $TMP_INFO"11"`
do
cat $TMP_INFO"10" | grep $VGI > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo $VGI >> $TMP_INFO"10"
fi
done
# collect information about filesystems in a VG (FSname, SIZE, % USED)
cat $TMP_INFO"5" | grep -v "TYPE" | while read LINE
do
echo $LINE | grep ":" > /dev/null 2>&1
if [ $? -eq 0 ]
then
VG=`echo $LINE | cut -d: -f1`
TMP_FILE=$TMP_INFO.$VG
cat /dev/null > $TMP_INFO.$VG
else
echo $LINE | awk '{print $2}' | egrep "boot|jfs2log|jfslog|sysdump" > /dev/null 2>&1
if [ $? -ne 0 ]
then
TYPE=`echo $LINE | awk '{print $2}'`
if [[ $TYPE = "jfs" ]] || [[ $TYPE = "jfs2" ]]
then
LV_NAME=`echo $LINE | awk '{print $1}'`
FS_NAME=`echo $LINE | awk '{print $7}'`
FS_SIZE=`cat $TMP_INFO"6" | grep "$LV_NAME " | awk '{print $2}' | cut -d. -f1`
FS_USED=`cat $TMP_INFO"6" | grep "$LV_NAME " | awk '{print $4}'`
echo $FS_NAME $FS_SIZE"MB" $FS_USED >> $TMP_INFO.$VG
echo $FS_NAME $FS_SIZE"MB" $FS_USED
else
if [ $TYPE = "paging" ]
then
LV_NAME=`echo $LINE | awk '{print $1}'`
FS_NAME=`echo $LV_NAME"-"$TYPE`
FS_SIZE=`cat $TMP_INFO"7" | grep "$LV_NAME " | awk '{print $4}'`
FS_USED=`cat $TMP_INFO"7" | grep "$LV_NAME " | awk '{print $5}'`
echo $FS_NAME $FS_SIZE $FS_USED"%" >> $TMP_INFO.$VG
echo $FS_NAME $FS_SIZE $FS_USED"%"
fi
fi
fi
fi
done
# collect information about VG (TOTAL size and % USED)
cat $TMP_INFO"4" | while read LINE
do
echo $LINE | grep ":" > /dev/null 2>&1
if [ $? -eq 0 ]
then
VG=`echo $LINE | cut -d: -f1`
cat /dev/null > $TMP_INFO.$VG.size
else
echo $LINE >> $TMP_INFO.$VG.size
fi
cat $TMP_INFO.$VG.size
done
# collect information about disk in a VG
cat $TMP_INFO"2" | awk '{print $1" "$3}' | while read pv vg
do
echo $pv >> $TMP_INFO.$vg.pv
done
# Calculate the array ROW_SPAN to convert in HTML
ROW_SPAN_VM=0
cat $TMP_INFO"4" | grep ":" | cut -d":" -f1 | while read VG_NAME
do
echo $VG_NAME
ROW_SPAN_VG=`cat $TMP_INFO.$VG_NAME | wc -l`
ROW_SPAN_PV=`cat $TMP_INFO.$VG_NAME.pv | wc -l`
if [ ${ROW_SPAN_VG} -lt 3 ]
then
ROW_SPAN_VG=3
fi
if [ ${ROW_SPAN_VG} -gt ${ROW_SPAN_PV} ]
then
let ROW_SPAN_VM=ROW_SPAN_VM+ROW_SPAN_VG
echo $ROW_SPAN_VG > $TMP_INFO.$VG_NAME.rowspan
else
let ROW_SPAN_VM=ROW_SPAN_VM+ROW_SPAN_PV
echo $ROW_SPAN_PV > $TMP_INFO.$VG_NAME.rowspan
fi
done
############### A verifier#####################
ROW_SPAN_PV_none=`cat $TMP_INFO"10" | wc -l`
let ROW_SPAN_VM=ROW_SPAN_VM+ROW_SPAN_PV_none
# create HTML file for each VM
COL_VM=`echo $VM_NAME`
cat $HTML_CONFIG_DIR/body1.txt | sed "s/row_span/$ROW_SPAN_VM/g" | sed "s/vm_name/$COL_VM/g" >> $TMP_HTML_FILE
#########################################
}
############################
# Inactive VG
inactive_vg()
{
vg=$1
# Inactive VG
# VG informations
ROW_SPAN_VG=`cat $TMP_INFO.$vg.pv | wc -l`
echo " <tr>" >> $TMP_HTML_FILE
#COL_VG=`echo "$vg</span></big></td>"`
#cat $HTML_CONFIG_DIR/body2.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/vg_name/$vg/g" | sed "s/size size_gb//g" | sed "s/used percent//g" >> $TMP_HTML_FILE
#COL_VG=`echo "$VG</span></big></td>"`
cat $HTML_CONFIG_DIR/body5.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/vg_name/$vg/g" >> $TMP_HTML_FILE
# FS informations
cat $HTML_CONFIG_DIR/body3.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/fs_name/<br>/g" >> $TMP_HTML_FILE
# FS size
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/<br>/g" >> $TMP_HTML_FILE
# FS used
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/<br>/g" >> $TMP_HTML_FILE
# VM disk
COL_PV=""
cat $TMP_INFO.$VG.pv | while read PV
do
COL_PV="$COL_PV<br>$PV"
done
COL_PV=`echo $COL_PV | cut -c5-`
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_PV/g" >> $TMP_HTML_FILE
# VM disk ID
COL_LUN_ID_VM=""
echo "########### $TMP_INFO.$VG.pv"
cat $TMP_INFO.$vg.pv | while read PV
do
# search for LUN ID
TYPE=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $2}'`
case "$TYPE" in
Virtual) LUN_ID_VM=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $3}' | cut -d- -f5 | sed "s/L//"`;;
MPIO) LUN_ID_VM="MPIO";;
SCSI) LUN_ID_VM="SCSI";;
esac
COL_LUN_ID_VM="$COL_LUN_ID_VM<br>$LUN_ID_VM"
done
COL_LUN_ID_VM=`echo $COL_LUN_ID_VM | cut -c5-`
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_LUN_ID_VM/g" >> $TMP_HTML_FILE
}
############################
# Active VG
active_vg()
{
echo "rootvg Active VG"
# VG information
if [ $VG != "rootvg" ]
then
echo " <tr>" >> $TMP_HTML_FILE
fi
VG_TOT_SIZE=`cat $TMP_INFO.$VG.size | head -1`
VG_USED_SIZE=`cat $TMP_INFO.$VG.size | tail -1`
let VG_USED_SIZE=VG_USED_SIZE*100/VG_TOT_SIZE
VG_USED_SZ=`echo $VG_USED_SIZE "%"`
let VG_TOT_SIZE=VG_TOT_SIZE/1024
VG_TOT_SZ=`echo $VG_TOT_SIZE "GB"`
ROW_SPAN_VG=`cat $TMP_INFO.$VG.rowspan`
cat $HTML_CONFIG_DIR/body2.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/vg_name/$VG/g" | sed "s/size_gb/$VG_TOT_SZ/g" | sed "s/percent/$VG_USED_SZ/g" >> $TMP_HTML_FILE
# Filesystems information
COL_FS=`cat $TMP_INFO.$VG | grep -v "/" | awk '{print $1}' | head -1`
if [[ $COL_FS != "" ]]
then
cat $TMP_INFO.$VG | grep -v "/" | awk '{print $1}' | grep -v "`cat $TMP_INFO.$VG | grep -v / | awk '{print $1}' | head -1`" | while read TXT
do
COL_FS=$COL_FS"<br>"$TXT
done
fi
TXT1=""
cat $TMP_INFO.$VG | grep / | awk '{print $1}' | while read LINE
do
TXT=""
TEST=`echo $LINE | cut -d/ -f2`
if [[ $TEST = "" ]]
then
TXT=`echo "\/"`
else
for i in `echo $LINE | sed "s/\// /g"`
do
TXT=`echo $TXT"\/"$i`
done
fi
TXT1=$TXT1"<br>"$TXT
done
COL_FS=$COL_FS$TXT1
if [[ `echo $COL_FS | cut -c2-3` = "br" ]]
then
COL_FS=`echo $COL_FS | cut -c5-`
fi
if [[ $COL_FS = "" ]]
then
COL_FS="<br>"
fi
cat $HTML_CONFIG_DIR/body3.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/fs_name/$COL_FS/g" >> $TMP_HTML_FILE
# FS size
cat $TMP_INFO.$VG | grep -v "/" > $TMP_INFO.$VG"1"
cat $TMP_INFO.$VG | grep "/" > $TMP_INFO.$VG"2"
cat $TMP_INFO.$VG"1" > $TMP_INFO.$VG
cat $TMP_INFO.$VG"2" >> $TMP_INFO.$VG
COL_FS_SZ=""
cat $TMP_INFO.$VG | awk '{print $2}' | while read FS_SZ
do
COL_FS_SZ="$COL_FS_SZ<br>$FS_SZ"
done
COL_FS_SZ=`echo $COL_FS_SZ | cut -c5-`
if [[ $COL_FS_SZ = "" ]]
then
COL_FS_SZ="<br>"
fi
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_FS_SZ/g" >> $TMP_HTML_FILE
# FS used
COL_FS_USED=""
cat $TMP_INFO.$VG | awk '{print $3}' | while read FS_USED
do
COL_FS_USED="$COL_FS_USED<br>$FS_USED"
done
COL_FS_USED=`echo $COL_FS_USED | cut -c5-`
if [[ $COL_FS_USED = "" ]]
then
COL_FS_USED="<br>"
fi
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_FS_USED/g" >> $TMP_HTML_FILE
# VM disk
COL_PV=""
cat $TMP_INFO.$VG.pv | while read PV
do
COL_PV="$COL_PV<br>$PV"
done
COL_PV=`echo $COL_PV | cut -c5-`
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_PV/g" >> $TMP_HTML_FILE
# VM disk ID
COL_LUN_ID_VM=""
echo "########### $TMP_INFO.$VG.pv"
cat $TMP_INFO.$VG.pv | while read PV
do
# search for LUN ID
TYPE=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $2}'`
case "$TYPE" in
Virtual) LUN_ID_VM=`cat $TMP_INFO"8" | grep "$PV " | awk '{print $3}' | cut -d- -f5 | sed "s/L//"`;;
MPIO) LUN_ID_VM="MPIO";;
SCSI) LUN_ID_VM="SCSI";;
esac
COL_LUN_ID_VM="$COL_LUN_ID_VM<br>$LUN_ID_VM"
done
COL_LUN_ID_VM=`echo $COL_LUN_ID_VM | cut -c5-`
cat $HTML_CONFIG_DIR/body4.txt | sed "s/row_span/$ROW_SPAN_VG/g" | sed "s/info/$COL_LUN_ID_VM/g" >> $TMP_HTML_FILE
}
###########################################
# Main
###########################################
if [ $# -gt 0 ]
then
usage $*
fi
main()
{
echo "#########################"
echo `date`" : Begin of "$sn
initialize
rm $TMP_DIR/info_vm* > /dev/null 2>&1
rm $TMP_DIR/info_vios_tmp.* > /dev/null 2>&1
rm $TMP_DIR/list* > /dev/null 2>&1
mv $TMP_HTML_FILE $TMP_HTML_FILE.$NUM
find $PATH_DATA -name '$TMP_HTML_FILE*' -mtime $RET_DAY | xargs rm -f 1>/dev/null 2>&1
#####################################
# List of all VIOS
ls $PATH_DATA | grep "iosclilsmap-all" | cut -d"." -f2 > $LIST_VIOS
#####################################
# list of all Virtual Machines
ls $PATH_DATA | grep "collect_info." | cut -d"." -f2 > $LIST_VM
#####################################
# list all disks from DS8000 and serial number
for DS in `ls $PATH_DATA/dscli_lsfbvol.*`
do
DS_SN=`cat $DS | head -1 | awk '{print $13}' | cut -d"-" -f2`
cat /dev/null > $TMP_DIR/DS.$DS_SN
cat $DS | while read line
do
LUN_NAME=`echo $line | awk '{print $1" "$2}' | sed "s/\///" | sed "s/IBM.2107-//"`
SZ=`echo $line | awk '{print $12" "$13}' | sed "s/-//"`
echo $LUN_NAME" "$SZ >> $TMP_DIR/DS.$DS_SN
done
done
#########################################
# Collect all servers serial number
grep systemid $PATH_DATA/iosclilsdev-devsys0-attr.* | awk '{print $2}' | cut -d"," -f2 | sort > $TMP_FILE"1"
grep "IBM," $PATH_DATA/collect_info.* | cut -d"," -f2 | sort >> $TMP_FILE"1"
# supress duplicate entries in servers serial number
cat $TMP_FILE"1" | sort | uniq > $TMP_FILE
#***********************************************
#******** Ajouter correction lsmap wrong lpar_id
#***********************************************
#########################################
# Collect lpar_id from HMC
for file in `ls $PATH_DATA/lshwres.*`
do
hmc=`echo $file | cut -d"." -f2`
rm $TMP_DIR/lshwres.$hmc > /dev/null 2>&1
cat $file | while read i
do
vios=`echo $i | awk '{print $1}'`
if [[ "$vios" != "" ]]
then
echo $i | grep "#####" > /dev/null 2>&1
if [ $? -eq 0 ]
then
SN=$i
TEST=1
else
vios_id=`echo $i | awk '{print $2}'`
vios_id_hexa1=`convert_to_hexa $vios_id`
echo $vios_id_hexa1
vios_id_hexa=`recreate_lpar_id $vios_id_hexa1`
slot="C"`echo $i | awk '{print $3}'`
lpar_id=`echo $i | awk '{print $4}'`
if [[ "$lpar_id" != "any" ]]
then
lpar_id_hexa1=`convert_to_hexa $lpar_id`
lpar_id_hexa=`recreate_lpar_id $lpar_id_hexa1`
else
lpar_id_hexa=$lpar_id
fi
if [[ "$TEST" == "1" ]]
then
echo $SN $vios_id_hexa >> $TMP_DIR/lshwres.$hmc
TEST=0
fi
echo $slot $lpar_id_hexa $lpar_id >> $TMP_DIR/lshwres.$hmc
fi
else
echo >> $TMP_DIR/lshwres.$hmc
SN=""
fi
done
done
#########################################
# print lsmap on VIOS
HDISK=""
for vios in `cat $LIST_VIOS`
do
cat $PATH_DATA/iosclilsmap-all.$vios | egrep "vhost|LUN|Backing device|-----" | while read line
do
TEXT=`echo $line | awk '{print $1}' | cut -c1-5`
case $TEXT in
#"vhost") echo $line | awk '{print $1" "$3}' >> $TMP_VIOS.$vios.lsmap ;;
"vhost") vhost=`echo $line | awk '{print $1}'`
slot=`echo $line | awk '{print $2}' | cut -d"-" -f3`
sn_vios=`cat $PATH_DATA/iosclilsdev-devsys0-attr.$vios | grep systemid | awk '{print $2}' | cut -c7-`
vios_id1=`cat $PATH_DATA/iosclilsdev-devsys0-attr.$vios | grep id_to_partition | awk '{print $2}' | tr 'A-Z' 'a-z' | cut -c 14-`
vios_id=`echo "0x000"$vios_id1`
echo $vios_id
lpar_id=`grep -p "$sn_vios" $TMP_DIR/lshwres.hmc* | grep -p "$vios_id" | grep "$slot" | tail -1 | awk '{print $2}'`
echo $vhost" "$lpar_id >> $TMP_VIOS.$vios.lsmap ;;
"-----") echo >> $TMP_VIOS.$vios.lsmap ;;
"Backi") HDISK=`echo $line | awk '{print $3}'`
echo $HDISK $LUN >> $TMP_VIOS.$vios.lsmap
LUN="";;
"LUN") LUN=`echo $line | awk '{print $2}'`;;
esac
done
done
#########################################
# Create a list of LPAR per serial number
for serial in `cat $TMP_FILE`
do
echo "********* VIOS *********" > $TMP_DIR/list_server_per_sn.$serial
grep $serial $PATH_DATA/iosclilsdev-devsys0-attr.* | cut -d"." -f2 | cut -d":" -f1 | while read vios
do
LIST_ID=""
#cat $PATH_DATA/iosclilsmap-all.$vios | grep vhost | awk '{print $1" "$3}' | sort | while read vhost id
cat $TMP_VIOS.$vios.lsmap | grep vhost | awk '{print $1" "$2}' | sort | while read vhost id
do
if [[ "$id" == "0x00000000" ]]
then
id=$vhost
fi
LIST_ID=`echo $LIST_ID";"$id`
done
echo $vios":0x000"`cat $PATH_DATA/iosclilsdev-devsys0-attr.$vios | grep id_to_partition | awk '{print $2}' | tr 'A-Z' 'a-z' | cut -c 14-`":"$LIST_ID >> $TMP_DIR/list_server_per_sn.$serial
done
echo "********* VM *********" >> $TMP_DIR/list_server_per_sn.$serial
grep $serial $PATH_DATA/collect_info.* | cut -d"." -f2 | cut -d":" -f1 | while read vm
do
echo $vm":0x000"`cat $PATH_DATA/collect_info.$vm | head -3 | tail -1 | cut -c 14- | tr 'A-Z' 'a-z'` >> $TMP_DIR/list_server_per_sn.$serial
done
done
#########################################
# print hdisk on VIOS
for vios in `cat $LIST_VIOS`
do
HDISK=""
cat $PATH_DATA/iosclilsdev-vpd.$vios | egrep "hdisk|Serial Number" | while read line
do
if [[ `echo $HDISK` != "" ]]
then
serial=`echo $line | grep "Serial Number" | sed -e 's/Serial Number//' | sed -e 's/\.//g' `
echo $HDISK $TYPE $serial >> $TMP_VIOS.$vios.pv
HDISK=""
fi
echo $line | awk '{print $1}' | grep hdisk > /dev/null 2>&1
if [ $? -eq 0 ]
then
HDISK=`echo $line | awk '{print $1}' | grep hdisk`
echo $line | egrep "SCSI|SAS" > /dev/null 2>&1
if [ $? -eq 0 ]
then
TYPE="SCSI"
else
echo $line | grep "2107" > /dev/null 2>&1
if [ $? -eq 0 ]
then
TYPE="MPIO"
else
TYPE="Unknown"
fi
fi
fi
done
done
#########################################
# Main
#########################################
cat $HTML_CONFIG_DIR/header.txt | sed "s/date/$NUM/g" > $TMP_HTML_FILE
#for VM_NAME in `echo "uc4rback"` # tsmr clkpgpfh"`
cat $LIST_VM | while read VM_NAME
do
echo $VM_NAME
SERIAL_NUM=`grep "$VM_NAME:" $TMP_DIR/list_server_per_sn.* | cut -d":" -f1 | cut -d"." -f2`
PARTITION_ID=`cat $TMP_DIR/list_server_per_sn.$SERIAL_NUM | grep "$VM_NAME:" | cut -d":" -f2`
cat $TMP_DIR/list_server_per_sn.$SERIAL_NUM | grep ";$PARTITION_ID" | cut -d":" -f1 > $TMP_INFO.vios
cat $TMP_DIR/list_server_per_sn.$SERIAL_NUM | grep ";$PARTITION_ID" | cut -d":" -f1
NUM_VIOS=`cat $TMP_INFO.vios | wc -l | awk '{print $1}'`
case $NUM_VIOS in
0) VIOS1=""
VIOS2="";;
1) VIOS1=`cat $TMP_INFO.vios`
VIOS2="";;
2) VIOS1=`head -1 $TMP_INFO.vios`
VIOS2=`tail -1 $TMP_INFO.vios`;;
esac
echo $VM_NAME $SERIAL_NUM $PARTITION_ID $VIOS1 $VIOS2
create_info_vm
for VG in `cat $TMP_INFO"9" $TMP_INFO"10"`
do
echo "#####$VG#####"
cat $TMP_INFO"9" | grep "$VG"
if [ $? -eq 0 ]
then
echo "########################## Active $VG ########################"
active_vg
else
echo "########################## Inactive $VG ########################"
inactive_vg $VG
fi
get_vios $VIOS1 $VG
get_vios $VIOS2 $VG
get_lun_id $VIOS1
done
cat $HTML_CONFIG_DIR/body6.txt >> $TMP_HTML_FILE
done
cat $HTML_CONFIG_DIR/footer.txt >> $TMP_HTML_FILE
echo "\n"
echo `date`" : End of "$sn
}
main > $logname 2>&1
exit
collect_info_lpar.sh
#!/bin/ksh
#set -x
#@(#) Recupere la configuration disk de chaque VIOS et VIOC (VIO Client)
########################################################################
# version 1.1 5-01-2010 Manu
# Ce script est appellé par le script collect_info_all_lpar.sh sur
# NIMH1, il peut tre lancé aussi sur chaque serveur NIM
########################################################################
dir=`dirname $0`
. $dir/.env
USER_VIOS=padmin # user ssh to VIOS
USER_VIOC=root # user ssh to VIOC
PATH_DATA=$logpath/config_lpar # directory to store collected informations
RET_DAY=15
DSH_WCOLL_VIOC=${DSH_WCOLL:-"$path_script/dsh_wcoll_all.cfg"}
DSH_WCOLL_VIOS=${DSH_WCOLL_VIOS:-"$path_script/dsh_wcoll_vios.cfg"}
###########################################################################
# initialize ()
#
# Parameters:
###########################################################################
initialize()
{
if [ ! -d $PATH_DATA ]
then
mkdir -p $PATH_DATA
fi
find $PATH_DATA -type f | grep -v "index" | xargs rm -f
if [ ! -d $logpath ]
then
mkdir -p $logpath
fi
}
###########################################################################
# usage ()
#
# Parameters:
###########################################################################
usage()
{
rep=$*
case "$rep" in
* )
echo "Usage: "$0
echo "\tPas de paramètre requis"
echo "\tce script est appelle par collect_info_all_lpar.sh sur NIMH1"
exit 1
;;
esac
}
###########################################################################
# dsh_vios ()
#
# Parameters:
# - command to VIOS
# + user USER_VIOS
# + remote host WCOLL_VIOS
###########################################################################
dsh_vios()
{
c=$*
log=$PATH_DATA/`echo $c | tr -d " "`
echo $c $log
sed '/^$/d' $DSH_WCOLL_VIOS > $logpath/dcp_$$.list
sed '/^ *$/d' $logpath/dcp_$$.list > $logpath/dcp_$$.list2
grep -v "^ *#" $logpath/dcp_$$.list2 > $logpath/dcp_$$.list
grep -v "$(hostname)" $logpath/dcp_$$.list > $logpath/dcp_$$.list2 ; mv $logpath/dcp_$$.list2 $logpath/dcp_$$.list # pas d'exécution locale
LIST=$(cat $logpath/dcp_$$.list); rm -f $logpath/dcp_$$.list
for i in $LIST
do
echo "$i:$NOCR"
ping -c 1 $i > /dev/null 2>&1
if [ $? -eq 0 ]
then
ssh $USER_VIOS@$i "$c" > $log.$i
else
echo "$i doesn't ping"
fi
done
}
###########################################################################
# dsh_vioc ()
#
# Parameters:
# + user USER_VIOC
# + remote host WCOLL_VIOC and WCOLL_EXCEPTION
###########################################################################
dsh_vioc()
{
log=$PATH_DATA/collect_info
sed '/^$/d' $DSH_WCOLL_VIOC > $logpath/dcp_$$.list
sed '/^ *$/d' $logpath/dcp_$$.list > $logpath/dcp_$$.list2
grep -v "^ *#" $logpath/dcp_$$.list2 > $logpath/dcp_$$.list
grep -v "$(hostname)" $logpath/dcp_$$.list > $logpath/dcp_$$.list2 ; mv $logpath/dcp_$$.list2 $logpath/dcp_$$.list # pas d'exécution locale
LIST=$(cat $logpath/dcp_$$.list); rm -f $logpath/dcp_$$.list
for i in $(echo $LIST" "$(hostname))
do
echo "$i:$NOCR"
ping -c 1 $i > /dev/null 2>&1
if [ $? -eq 0 ]
then
collect_vioc $USER_VIOC $i > $log.$i
else
echo "$i doesn't ping"
fi
done
}
###########################################################################
# collect_vioc ()
#
# Parameters:
# - user USER_VIOC
# - remote host WCOLL_VIOC
###########################################################################
collect_vioc () {
u=$1
h=$2
list_disk=$logpath/list_disk.txt
echo "############# Serial Number - Partition ID #############"
ssh $u@$h lsattr -El sys0 -a systemid -a id_to_partition | awk '{print $2}'
echo "############# lspv #############"
ssh $u@$h lspv
echo "############# Disk Size MB #############"
ssh $u@$h lspv > $list_disk
for HDISK in `cat $list_disk | egrep "concurrent|active" | awk '{print $1}'`
do
echo $HDISK":"
ssh $u@$h lspv $HDISK | grep "TOTAL PPs:" | awk '{print $4}' | sed "s/(//"
done
echo "############# VG Size #############"
# size of VG active or concurrent
for VG in rootvg `ssh $u@$h lsvg | grep -v rootvg | sort`
do
egrep "active|concurrent" $list_disk | awk '{print $3}' | grep "$VG" > /dev/null 2>&1
if [ $? -eq 0 ]
then
echo "$VG:"
ssh $u@$h lsvg $VG | grep "TOTAL PPs:" | awk '{print $7}' | sed "s/(//"
ssh $u@$h lsvg $VG | grep "USED PPs:" | awk '{print $6}' | sed "s/(//"
fi
done
echo "############# lsvg -l #############"
for VG in rootvg `ssh $u@$h lsvg -o | grep -v rootvg | sort`
do
ssh $u@$h lsvg -l $VG | grep -v "LV NAME"
done
echo "############# df -m #############"
ssh $u@$h df -m | egrep -v "%Used|/proc"
echo "############# Paging Space #############"
ssh $u@$h lsps -a
echo "############# Disk ID #############"
for HDISK in `ssh $u@$h lspv | awk '{print $1}'`
do
ssh $u@$h lscfg -vl $HDISK
done
test -f $list_disk && rm -f $list_disk
}
###########################################################################
# main ()
#
# Collect informations about VIOS and VIOC to be able to create a
# disk mapping from storage to VIOC
#
###########################################################################
if [ $# -gt 0 ]
then
usage $*
fi
main () {
echo `date`" : Begin of "$sn" "$(hostname)
initialize
for CMD in "ioscli lsmap -all" "ioscli lsdev -vpd" "ioscli lsdev -dev sys0 -attr"
do
dsh_vios $CMD
done
dsh_vioc
echo `date`" : End of "$sn" "$(hostname)
}
main 2>&1 | tee $logname
collect_info_ds8000.sh
#!/bin/ksh
#set -x
#############################################
#@(#) Recupere la configuration disk des DS8000
#############################################
# version 1.1 5-01-2010 Manu
#############################################
dir=`dirname $0`
. $dir/.env
PATH_DATA=$logpath/config_lpar # directory to store collected informations
RET_DAY=15
###########################################################################
# initialize ()
#
# Parameters:
###########################################################################
initialize()
{
if [ ! -d $PATH_DATA ]
then
mkdir -p $PATH_DATA
fi
if [ ! -d $logpath ]
then
mkdir -p $logpath
fi
}
###########################################################################
# usage ()
#
# Parameters:
###########################################################################
usage()
{
rep=$*
case "$rep" in
* )
echo "Usage: "$0
echo "\tPas de paramètre requis"
echo "\tce script appelle le script collect_info_lpar.sh sur tous les serveurs"
echo "\tNIM et centralise les logs sur $(hostname)"
exit 1
;;
esac
}
###########################################################################
# collect_ds8000 ()
#
# Parameters:
###########################################################################
collect_ds8000() {
cmd=$1
for DS_PROFILE in `ls /opt/ibm/dscli/profile | grep "read" | grep DS`
do
DS_NAME=`echo $DS_PROFILE | cut -d"_" -f1`
/opt/ibm/dscli/dscli $cmd -l -cfg /opt/ibm/dscli/profile/$DS_PROFILE > $PATH_DATA/dscli_$cmd.$DS_NAME
done
}
###########################################################################
# main ()
#
# Collect informations about VIOS and VIOC to be able to create a
# disk mapping from storage to VIOC
#
###########################################################################
if [ $# -gt 0 ]
then
usage $*
fi
main () {
echo `date`" : Begin of "$sn" "$(hostname)
for COMMAND in lshostconnect lsextpool lsfbvol lsvolgrp
do
collect_ds8000 "$COMMAND"
done
echo `date`" : End of "$sn" "$(hostname)
}
main 2>&1 | tee $logname
collect_info_all_lpar.sh
#!/bin/ksh
#set -x
#############################################
#@(#) Recupere la configuration disk de chaque VIOS et VIOC (VIO Client)
#############################################
# ce script appelle le script collect_info_lpar.sh sur tous les serveurs
# NIM et centralise les logs sur NIM
# Il faudra ensuite lancer le script ./config_disk_vios.sh sur NIM
# pour reconstituer le mapping des disks
# version 1.1 5-01-2010 Manu
#############################################
dir=`dirname $0`
. $dir/.env
WCOLL_NIM="nim" # list of NIM servers
WCOLL_HMC="hmc"
PATH_DATA=$logpath/config_lpar # directory to store collected informations
CMD_COLLECT=$path_script/collect_info_lpar.sh
RET_DAY=15
dest="$mail_system"
swap_max=20 # Threshold for swap on HMC
###########################################################################
# initialize ()
#
# Parameters:
###########################################################################
initialize()
{
if [ ! -d $PATH_DATA ]
then
mkdir -p $PATH_DATA
fi
if [ ! -d $logpath ]
then
mkdir -p $logpath
fi
}
###########################################################################
# usage ()
#
# Parameters:
###########################################################################
usage()
{
rep=$*
case "$rep" in
* )
echo "Usage: "$0
echo "\tPas de paramètre requis"
echo "\tce script appelle le script collect_info_lpar.sh sur tous les serveurs"
echo "\tNIM et centralise les logs sur $(hostname)"
exit 1
;;
esac
}
###########################################################################
# dsh_nim ()
#
# Parameters:
# + user USER_VIOC
# + remote host WCOLL_VIOC and WCOLL_EXCEPTION
###########################################################################
dsh_nim()
{
host=$1
echo "$host:"
ping -c 1 $host > /dev/null 2>&1
if [ $? -eq 0 ]
then
collect_nim $host
else
echo "$host doesn't ping"
fi
}
###########################################################################
# collect_nim ()
#
# Parameters:
# - remote host WCOLL_VIOC
###########################################################################
collect_nim() {
h=$1
############# scp $h:$PATH_DATA/* $PATH_DATA #############
ssh $h $CMD_COLLECT
scp -p $h:$PATH_DATA/* $PATH_DATA
}
###########################################################################
# main ()
#
# Collect informations about VIOS and VIOC to be able to create a
# disk mapping from storage to VIOC
#
###########################################################################
if [ $# -gt 0 ]
then
usage $*
fi
main () {
echo `date`" : Begin of "$sn" "$(hostname)
initialize
lsnim master > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo "Ce serveur n'est pas un NIM Master"
exit 1
fi
# start the collection script on NIM
echo "$(hostname):"
$CMD_COLLECT
# start the collection script on the other NIM servers
#for HOST in $(echo $WCOLL_NIM | sed "s/$(hostname)//")
#do
# dsh_nim $HOST
#done
# Collect disk informations
for DS_PROFILE in `ls /opt/ibm/dscli/profile | grep "read" | grep DS`
do
DS_NAME=`echo $DS_PROFILE | cut -d"_" -f1`
echo "$DS_NAME:"
/opt/ibm/dscli/dscli lsfbvol -l -cfg /opt/ibm/dscli/profile/$DS_PROFILE > $PATH_DATA/dscli_lsfbvol.$DS_NAME
done
# Collect HMC informations
for hmc in $(echo $WCOLL_HMC)
do
echo "$hmc:"
echo > $PATH_DATA/lshwres.$hmc
ssh hscroot@$hmc "lssyscfg -r sys -F name serial_num" > $PATH_DATA/lssyscfg
for sysname in `cat $PATH_DATA/lssyscfg | awk '{print $1}'`
do
sys=`cat $PATH_DATA/lssyscfg | grep "$sysname"`
for vios in `ssh hscroot@$hmc "lssyscfg -r lpar -m $sysname -F name lpar_env" | grep "vioserver" | sed "s/vioserver//"`
do
echo "\n""##### "$sys >> $PATH_DATA/lshwres.$hmc
ssh hscroot@$hmc "lshwres -r virtualio --rsubtype scsi -m $sysname --filter lpar_names=$vios -F lpar_name lpar_id slot_num remote_lpar_id remote_lpar_name" | grep -v "No results were found" >> $PATH_DATA/lshwres.$hmc
done
done
# Send message is swap is higher than threshold
ssh hscroot@$hmc "cat /proc/swaps" | grep partition | awk '{print $3" "$4}' > $logpath/swap_hmc.log
swap_kb=`cat $logpath/swap_hmc.log | awk '{print $1}'`
swap_used=`cat $logpath/swap_hmc.log | awk '{print $2}'`
let swap_pct="(100 * $swap_used / $swap_kb)"
if [ $swap_pct -gt $swap_max ]
then
mail -s "Swap used on HMC $hmc is $swap_pct%" $dest < /dev/null
echo "Swap used on HMC $hmc is $swap_pct%"
fi
rm $logpath/swap_hmc.log
done
test -f $PATH_DATA/lssyscfg && rm -f $PATH_DATA/lssyscfg
echo `date`" : End of "$sn" "$(hostname)
}
main 2>&1 | tee $logname
HTML directory config_dir_vios_html body1.txt
<tr>
<td style="border: 1px solid rgb(0, 0, 0); color: red;"
rowspan="row_span" align="left" height="240"
valign="top"><b><font size="3">vm_name</font></b></td>
body2.txt
<td style="border: 1px solid rgb(0, 0, 0);" rowspan="row_span" align="left" valign="top"><big><span style="font-weight: bold;">vg_name</span><br> size size_gb<br> used percent</big></td>
body3.txt
<td style="border: 1px solid rgb(0, 0, 0);" rowspan="row_span" align="left" valign="top"><big><font face="Times New Roman" size="2">fs_name </font></big></td>
body4.txt
<td style="border: 1px solid rgb(0, 0, 0);" rowspan="row_span" align="center" valign="top"><big><font face="Times New Roman" size="2">info </font></big></td>
body5.txt
<td style="border: 1px solid rgb(0, 0, 0);" rowspan="row_span" align="left" valign="top"><big><span style="font-weight: bold;">vg_name</span> </big></td>
body6.txt
<tr>
<td align="left" height="17"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
</tr>
footer.txt
</tbody> </table> <!-- ************************************************************************** --> </body> </html>
header.txt
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="CONTENT-TYPE">
<title></title>
<meta content="OpenOffice.org 2.3 (Win32)" name="GENERATOR">
<meta content="ei" name="AUTHOR">
<meta content="20070919;21330673" name="CREATED">
<meta content="ei" name="CHANGEDBY">
<meta content="20070919;21512178" name="CHANGED">
<style>
<!-- BODY,DIV,TABLE,THEAD,TBODY,TFOOT,TR,TH,TD,P { font-family:"Arial"; font-size:x-small }
-->
</style>
</head>
<body style="color: rgb(0, 0, 0);">
<br>
<h1 style="text-align: left;">
<span
style="text-decoration: underline;">Configuration
disk des machines virtuelles AIX date
</span></h1>
<br>
<table border="0" cellspacing="0" cols="13"
frame="void" rules="none">
<colgroup><col width="102"><col width="86"><col
width="230"><col width="86"><col width="86"><col
width="86"><col width="121"><col width="86"><col
width="86"><col width="86"><col width="86"><col
width="123"><col width="86"></colgroup> <tbody>
<tr>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" height="21" width="102"><b><font
face="Times New Roman" size="2">VM name</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">VG name</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="230"><b><font
face="Times New Roman" size="2">filesystems</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">FS SIZE</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">% used</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">VM hdisk</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="121"><b><font
face="Times New Roman" size="2">VM disk ID</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">VIOS1</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><font
face="Times New Roman"><br>
</font></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">VIOS2</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><font
face="Times New Roman"><br>
</font></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="123"><b><font
face="Times New Roman" size="2">IBM LUN ID</font></b></td>
<td style="border: 1px solid rgb(0, 0, 0);"
align="center" width="86"><b><font
face="Times New Roman" size="2">LUN size</font></b></td>
</tr>
<tr>
<td align="left" height="17"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
<td align="left"><br>
</td>
</tr>
aix/scripts.txt · Last modified: 2021/01/01 21:21 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
